Page 80 - MSAM-2-3

Materials Science in Additive Manufacturing Additive manufacturing of SiC composite

https://doi.org/10.1016/j.addma.2022.102910 https://doi.org/10.1016/j.triboint.2008.10.017
7. Idris MI, Konishi H, Imai M, et al., 2015, Neutron 18. Lu J, Ni D, Liao C, et al., 2021, Fabrication and microstructure
irradiation swelling of SiC and SiCf/SiC for advanced evolution of C /ZrB -SiC composites via direct ink writing
2
sf
nuclear applications. Energy Procedia, 71: 328–336. and reactive melt infiltration. J Adv Ceram, 10: 1371–1380.
https://doi.org/10.1016/j.egypro.2014.11.886 https://doi.org/10.1007/s40145-021-0512-z
8. Zhao J, Shi L, Liu M, et al., 2022, Densification and 19. Zhou W, Meiser M, Wich F, et al., 2021, Fiber orientation
enhancement of SiC particulate‐reinforced fine‐grain SiC dependence of tribological behavior of short carbon fiber
ceramic. Int J Appl Ceram Technol, 19: 2514–2522. reinforced ceramic matrix composites. J Am Ceram Soc,
https://doi.org/10.1111/ijac.14112 105: 538–552.
9. Han F, Zhong Z, Zhang F, et al., 2014, Preparation and https://doi.org/10.1111/jace.18075
characterization of SiC Whisker-reinforced SiC porous 20. Sun G, Zhang C, Zhang Q, et al., 2022, Microstructure and
ceramics for hot gas filtration. Ind Eng Chem Res, mechanical properties of SiC /SiC composite prepared by
f
54: 226–232. chemical vapor infiltration. Ceram Int, 48: 36983–36991.
https://doi.org/10.1021/ie503626u https://doi.org/10.1016/j.ceramint.2022.08.267
10. Lv X, Ye F, Cheng L, et al., 2019, Fabrication of SiC whisker- 21. Zhang J, Luo R, Zhang Y, et al., 2010, Effect of isotropic
reinforced SiC ceramic matrix composites based on 3D interlayers on the mechanical and thermal properties of
printing and chemical vapor infiltration technology. J Eur carbon/carbon composites. Mater Lett, 64: 1536–1538.
Ceram Soc, 39: 3380–3386.
https://doi.org/10.1016/j.matlet.2010.04.013
https://doi.org/10.1016/j.jeurceramsoc.2019.04.043
22. Zhou Q, Dong S, Ding Y, et al., 2009, Three-dimensional
11. Song N, Zhang HB, Liu H, et al., 2017, Effects of SiC carbon fiber-reinforced silicon carbide matrix composites
Whiskers on the mechanical properties and microstructure by vapor silicon infiltration. Ceram Int, 35: 2161–2169.
of SiC ceramics by reactive sintering. Ceram Int, 43: 6786–
6790. https://doi.org/10.1016/j.ceramint.2008.11.023
https://doi.org/10.1016/j.ceramint.2017.02.095 23. Chen Z, Sun X, Shang Y, et al., 2021, Dense ceramics with
complex shape fabricated by 3D printing: A review. J Adv
12. Han F, Zhong Z, Yang Y, et al., 2016, High gas permeability Ceram, 10: 195–218.
of SiC porous ceramics reinforced by mullite fibers. J Eur
Ceram Soc, 36: 3909–3917. https://doi.org/10.1007/s40145-020-0444-z
https://doi.org/10.1016/j.jeurceramsoc.2016.06.048 24. Zocca A, Lima P, Diener S, et al., 2019, Additive
manufacturing of SiSiC by layerwise slurry deposition and
13. Chen R, Jin X, Hei D, et al., 2021, Enhanced mechanical binder jetting (LSD-print). J Eur Ceram Soc, 39: 3527–3533.
strength of SiC reticulated porous ceramics via addition of
in-situ chopped carbon fibers. J Alloys Compd, 888: 161638. https://doi.org/10.1016/j.jeurceramsoc.2019.05.009
https://doi.org/10.1016/j.jallcom.2021.161638 25. Wu S, Yang L, Yang X, et al., 2022, Mechanical properties
and energy absorption of AlSi10Mg Gyroid lattice structures
14. Li L, 2020, Temperature-dependent proportional limit stress fabricated by selective laser melting. Smart Manuf,
of SiC/SiC fiber-reinforced ceramic-matrix composites. 1: 2150001–2150002.
High Temp Mater Processes, 39: 209–218.
https://doi.org/10.1142/S2737549821500010
https://doi.org/10.1515/htmp-2020-0052
26. Liu Z, Li Z, Wang Q, et al., 2022, Multimaterial additive
15. Yin J, Lee SH, Feng L, et al., 2016, Fabrication of SiCf/ manufacturing manipulator for fabricating magnetoelectric
SiC composites by hybrid techniques of electrophoretic pressure sensors. Sci China Technol Sci, 65: 2542–2550.
deposition and polymer impregnation and pyrolysis. Ceram
Int, 42: 16431–16435. https://doi.org/10.1007/s11431-022-2154-9
https://doi.org/10.1016/j.ceramint.2016.07.177 27. Chen H, Wang X, Xue F, et al., 2018, 3D printing of SiC
ceramic: Direct ink writing with a solution of preceramic
16. Park JS, Nishimura H, Hayasaka D, et al., 2016, Fabrication polymers. J Eur Ceram Soc, 38: 5294–5300.
of short SiC fiber reinforced SiC matrix composites with high
fiber volume fraction. Fusion Eng Des, 109–111: 1174–1178. https://doi.org/10.1016/j.jeurceramsoc.2018.08.009
https://doi.org/10.1016/j.fusengdes.2015.12.060 28. Chen F, Liu K, Sun H, et al., 2018, Fabrication of complicated
silicon carbide ceramic components using combined 3D
17. Tang H, Zeng X, Xiong X, et al., 2009, Mechanical and
tribological properties of short-fiber-reinforced SiC printing with gelcasting. Ceram Int; 44: 254–260.
composites. Tribol Int, 42: 823–827. https://doi.org/10.1016/j.ceramint.2017.09.166

Volume 2 Issue 3 (2023) 19 https://doi.org/10.36922/msam.1604