Page 49 - IJAMD-1-1

International Journal of AI
for Material and Design ML for quality improvement in L-PBF

72. Wasmer K, Kenel C, Saeidi F, Leinenbach C, Shevchik SA. of using machine learning in laser powder bed fusion
In Situ and Real-Time Monitoring of Powder-Bed AM by for metal additive manufacturing. Virtual Phys
Combining Acoustic Emission and Machine Learning. In: Prototyp. 2021;16(3):372-386.
Lasers in Manufacturing Conference, 2017.
doi: 10.1080/17452759.2021.1944229
doi: 10.1016/J.ADDMA.2017.11.012
77. Cai Y, Xiong J, Chen H, Zhang G. A review of in-situ
73. Wasmer K, Le-Quang T, Meylan B, Shevchik SA. In monitoring and process control system in metal-based laser
situ quality monitoring in AM using acoustic emission: additive manufacturing. J Manuf Syst. 2023;70:309-326.
A reinforcement learning approach. J Mater Eng Perform.
2019;28(2):666-672. doi: 10.1016/j.jmsy.2023.07.018
doi: 10.1007/s11665-018-3690-2 78. Cao Z, Liu Q, Liu Q, Yu X, Kruzic JJ, Li X. A machine learning
method to quantitatively predict alpha phase morphology
74. Colosimo BM, Huang Q, Dasgupta T, Tsung F. Opportunities in additively manufactured Ti-6Al-4V. NPJ Comput Mater.
and challenges of quality engineering for additive 2023;9(1):1-15.
manufacturing. J Qual Technol. 2018;50(3):233-252.
doi: 10.1038/s41524-023-01152-y
doi: 10.1080/00224065.2018.1487726
79. Nandhakumar R, Venkatesan K. A process parameters review
75. Li BH, Hou BC, Yu WT, Lu XB, Yang CW. Applications of on selective laser melting-based additive manufacturing
artificial intelligence in intelligent manufacturing: A review. of single and multi-material: Microstructure, physical
Front Inf Technol Electron Eng. 2017;18(1):86-96.
properties, tribological, and surface roughness. Mater Today
doi: 10.1631/FITEE.1601885 Commun. 2023;35:105538.
76. Sing SL, Kuo CN, Shih CT, Ho CC, Chua CK. Perspectives doi: 10.1016/j.mtcomm.2023.105538

Volume 1 Issue 1 (2024) 43 https://doi.org/10.36922/ijamd.2301