Page 476 - IJB-9-2
P. 476

CORRIGENDUM


            DOI: https://doi.org/10.18063/ijb.704

            Published Online: March 16, 2023



            Dajing Gao, a co-author who published two articles in International Journal of Bioprinting Volume 5
            Issue 1, had requested a change to the affiliation. Dajing Gao, who was working at Xi’an University of
            Technology (China) at the time of article processing stage, claimed that he overlooked the affiliation
            part, and thus, the incorrect affiliation was not corrected in time. In both articles, only Dajing Gao
            requested affiliation change, while the affiliation of other co-authors remains the same.

               See below the revised author and affiliation blocks of both articles:

            Article 1:

            Gao D, Yao D, Leist SK, et al., 2019, Mechanisms and modeling of electrohydrodynamic phenomena.
            Int J Bioprint, 5(1):166. https://doi.org/10.18063/ijb.v5i1.166

            Revised author and affiliation block:

             Dajing Gao , Donggang Yao , Steven K. Leist , Yifan Fei , Jack Zhou *
                                                          3
                      1
                                                                   3
                                   2
                                                 3
             1 School of Mechanical and Precision Instrument Engineering, Xi’an University of Technology, Xi’an, 710048,
             Shaanxi, China
             2 School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
             3 Department of Mechanical Engineering and Mechanics, Drexel University, Philadelphia, PA 19104, USA
            Article 2:

            Gao D, Zhou JG, 2019, Designs and applications of electrohydrodynamic 3D printing. Int J Bioprint,
            5(1):172. http://doi.org/10.18063/ijb.v5i1.172


            Revised author and affiliation block:
             Dajing Gao , Jack G. Zhou *
                                  2
                      1
             1 School of Mechanical and Precision Instrument Engineering, Xi’an University of Technology, Xi’an, 710048,
             Shaanxi, China
             2 Department of Mechanical Engineering and Mechanics, Drexel University, 3141 Chestnut Street, Philadelphia,
             PA 19104, USA















            Volume 9 Issue 2 (2023)                        468                         https://doi.org/10.18063/ijb.704
   471   472   473   474   475   476   477   478   479   480   481