Page 34 - ESAM-1-1

Engineering Science in
Additive Manufacturing ML in MAM monitoring and control through images

doi: 10.1088/2051-672X/ab1c98 doi: 10.1007/s00170-023-11042-8
165. Dharmawan AG, Xiong Y, Foong SH, Soh GS. A Model- 175. Riensche A, Bevans B, Sions J, et al. Toward Rapid
based Reinforcement Learning and Correction Framework Process Qualification of Laser Powder Bed Fusion: Model
for Process Control of Robotic Wire Arc Additive Predictive Control of Part Thermal History. In: Conference:
Manufacturing. In: Conference: 2020 IEEE International ASME 2024 19 International Manufacturing Science and
th
Conference on Robotics and Automation (ICRA); 2020. Engineering Conference; 2024.
p. 4030-4036.
doi: 10.1115/MSEC2024-125241
doi: 10.1109/icra40945.2020.9197222 176. Kozjek D, Porter C, Carter FM 3 , Mogonye JE, Cao J. Data-
rd
166. Mireles J, Terrazas C, Gaytan SM, Roberson DA, Wicker RB. driven prediction of geometry- and toolpath sequence-
Closed-loop automatic feedback control in electron beam dependent intra-layer process conditions variations in laser
melting. Int J Adv Manuf Technol. 2015;78(5-8):1193-1199. powder bed fusion. J Manuf Process. 2023;100:34-46.
doi: 10.1007/s00170-014-6708-4 doi: 10.1016/j.jmapro.2023.05.021
167. Imani F, Yao B, Chen RM, Rao P, Yang H. Joint 177. Huang XQ, Seede R, Karayagiz K, et al. Predictive
multifractal and lacunarity analysis of image profiles for microstructure distribution and printability maps in laser
manufacturing quality control. J Manuf Sci Eng Trans ASME. powder bed fusion for a Ni-Cu alloy. Computat Mater Sci.
2019;141(4):044501. 2024;231:112605.
doi: 10.1115/1.4042579 doi: 10.1016/j.commatsci.2023.112605
168. Wang R, Standfield B, Dou C, Law AC, Kong ZJ. Real-time 178. Favero G, Berti G, Bonesso M, et al. Experimental
process monitoring and closed-loop control on laser power and numerical analyses of fluid flow inside additively
via a customized laser powder bed fusion platform. Addit manufactured and smoothed cooling channels. Int Commun
Manuf. 2023;66:103449. Heat Mass Transfer. 2022;135:106128.
doi: 10.1016/j.addma.2023.103449 doi: 10.1016/j.icheatmasstransfer.2022.106128
169. Su Y, Wang Z, Xu X, Luo K, Lu J. Effect of closed-loop 179. Liu Y, Wang L, Brandt M. Model predictive control of laser
controlled melt pool width on microstructure and tensile metal deposition. Int J Adv Manuf Technol. 2019;105:1055-1067.
property for Fe-Ni-Cr alloy in directed energy deposition. doi: 10.1007/s00170-019-04279-9
J Manuf Process. 2022;82:708-721.
180. Zhu XB, Jiang FC, Guo CH, Wang Z, Dong T, Li HX.
doi: 10.1016/j.jmapro.2022.08.049 Prediction of melt pool shape in additive manufacturing
170. Farshidianfar MH, Khodabakhshi F, Khajepour A, Gerlich based on machine learning methods. Optics Laser Technol.
AP. Closed-loop control of microstructure and mechanical 2023;159:108964.
properties in additive manufacturing by directed energy doi: 10.1016/j.optlastec.2022.108964
deposition. Mater Sci Eng A. 2021;803:140483.
181. Wang Q, Michaleris P, Nassar AR, Irwin JE, Ren Y,
doi: 10.1016/j.msea.2020.140483 Stutzman CB. Model-based feedforward control of laser
171. Tyralla D, Seefeld T. Temperature field based closed-loop powder bed fusion additive manufacturing. Addit Manuf.
control of laser hot wire cladding for low dilution. Procedia 2020;31:100985.
CIRP. 2020;94:451-455. doi: 10.1016/j.addma.2019.100985
doi: 10.1016/j.procir.2020.09.163 182. Zhong Q, Tian X, Huang X, Huo C, Li D. Using feedback
172. Rezaeifar H, Elbestawi MA. On-line melt pool temperature control of thermal history to improve quality consistency
control in L-PBF additive manufacturing. Int J Adv Manuf of parts fabricated via large-scale powder bed fusion. Addit
Technol. 2021;112(9-10):2789-2804. Manuf. 2021;42:101986.
doi: 10.1007/s00170-020-06441-0 doi: 10.1016/j.addma.2021.101986
173. Iordanou HN, Surgenor BW. Experimental evaluation 183. Zeinali M, Khajepour A. Height control in laser cladding
of the robustness of discrete sliding mode control versus using adaptive sliding mode technique: Theory and
linear quadratic control. IEEE Trans Control Syst Technol. experiment. J Manuf Sci Eng. 2010;132(4):041016.
1997;5(2):254-260. doi: 10.1115/1.4002023
doi: 10.1109/87.556029 184. Chen L, Yao X, Chew Y, Weng F, Moon SK, Bi G. Data-driven
174. Regulin D, Barucci R. A benchmark of approaches for closed adaptive control for laser-based additive manufacturing with
loop control of melt pool shape in DED. Int J Adv Manuf automatic controller tuning. Appl Sci. 2020;10(22):7967.
Technol. 2023;126:1-15. doi: 10.3390/app10227967

Volume 1 Issue 1 (2025) 28 doi: 10.36922/esam.8548