Page 64 - ESAM-1-1

Engineering Science in
Additive Manufacturing Additive manufacturing of EH36 steels

doi: 10.1080/17452759.2023.2169172 doi: 10.1007/s00170-015-7077-3
43. Elambasseril J, Rogers J, Wallbrink C, Munk D, Leary M, 53. Wang F, Williams S, Colegrove P, Antonysamy AA.
Qian M. Laser powder bed fusion additive manufacturing Microstructure and mechanical properties of wire and arc
(LPBF-AM): the influence of design features and LPBF additive manufactured Ti-6Al-4V. Metal Mater Trans A.
variables on surface topography and effect on fatigue 2013;44:968-977.
properties. Crit Rev Solid State Mater Sci. 2023;48:132-168.
doi: 10.1007/s11661-012-1444-6
doi: 10.1080/10408436.2022.2041396
54. Lipiäinen K, Afkhami S, Lund H, et al. Manufacturing and
44. Ahn DG. Directed energy deposition (DED) process: State mechanical performance of a large-scale stainless steel vessel
of the art. Int J Precis Eng Manuf Green Tech. 2021;8:703-742. fabricated by wire-arc direct energy deposition. Mater Des.
2024;243:113044.
doi: 10.1007/s40684-020-00302-7
doi: 10.1016/j.matdes.2024.113044
45. Svetlizky D, Zheng B, Vyatskikh A, et al. Laser-based directed
energy deposition (DED-LB) of advanced materials. Mater 55. Shi G, Zhang R, Cao Y, Yang G. A review of the vaporization
Sci Eng A. 2022;840:142967. behavior of some metal elements in the LPBF process.
Micromachines. 2024;15:846.
doi: 10.1016/j.msea.2022.142967
doi: 10.3390/mi15070846
46. Blinn B, Lion P, Jordan O, et al. Process-influenced fatigue
behavior of AISI 316L manufactured by powder- and wire- 56. Vakifahmetoglu C, Hasdemir B, Biasetto L. Spreadability of
based Laser Direct Energy Deposition. Mater Sci Eng A. metal powders for laser-powder bed fusion via simple image
2021;818:141383. processing steps. Materials. 2021;15:205.
doi: 10.1016/j.msea.2021.141383 doi: 10.3390/ma15010205
47. Selema A, Ibrahim MN, Sergeant P. Metal additive 57. Li W, Yan L, Chen X, Zhang J, Zhang X, Liou F. Directed
manufacturing for electrical machines: Technology review energy depositing a new Fe-Cr-Ni alloy with gradually
and latest advancements. Energies. 2022;15:1076. changing composition with elemental powder mixes and
particle size’ effect in fabrication process. J Mater Process
doi: 10.3390/en15031076 Technol. 2018;255:96-104.
48. Caiazzo F, Alfieri V, Argenio P, Sergi V. Additive doi: 10.1016/j.jmatprotec.2017.12.010
manufacturing by means of laser-aided directed metal
deposition of 2024 aluminium powder: Investigation and 58. Ghoncheh MH, Shahriari A, Birbilis N, Mohammadi M.
optimization. Adv Mech Eng. 2017;9:168781401771498. Process-microstructure-corrosion of additively
manufactured steels: A review. Crit Rev Solid State Mater
doi: 10.1177/1687814017714982 Sci. 2024;49:607-717.
49. Chew YX, Ang JH, Sastry KY, Xu DQ, Kuik S, Bi GJ. doi: 10.1080/10408436.2023.2255616
Feasibility Study on Fabrication of Large-Scale Offshore
Structural Steel Component Using LAAM Technology. In: 59. Zheng D, Li R, Yuan T, et al. Microstructure and mechanical
Proceedings of ASME 2020 39 International Conference property of additively manufactured NiTi alloys:
th
on Ocean, Offshore and Arctic Engineering, American A comparison between selective laser melting and directed
Society of Mechanical Engineers, Virtual, Online; 2020. p. energy deposition. J Central South Univ. 2021;28:1028-1042.
V003T03A001. doi: 10.1007/s11771-021-4677-y
doi: 10.1115/OMAE2020-18266 60. Cerezo PM, Aguilera JA, Garcia-Gonzalez A, Lopez-Crespo P.
50. Ríos S, Colegrove PA, Martina F, Williams SW. Analytical Microhardness and microstructure analysis of the LPBF
process model for wire + arc additive manufacturing. Addit additively manufactured 18Ni300. Materials. 2024;17:661.
Manuf. 2018;21:651-657. doi: 10.3390/ma17030661
doi: 10.1016/j.addma.2018.04.003 61. Lyu T, Keshavarz MK, Patel S, et al. Melting mode driven
51. Williams SW, Martina F, Addison AC, Ding J, Pardal G, tuning of local microstructure and hardness in laser
Colegrove P. Colegrove, wire + arc additive manufacturing. powder bed fusion of 18Ni-300 maraging steel. Materialia.
Mater Sci Technol. 2016;32:641-647. 2024;35:102113.
doi: 10.1016/j.mtla.2024.102113
doi: 10.1179/1743284715Y.0000000073
52. Ding D, Pan Z, Cuiuri D, Li H. Wire-feed additive 62. Wang P, Huang P, Ng FL, et al. Additively manufactured
manufacturing of metal components: technologies, CoCrFeNiMn high-entropy alloy via pre-alloyed powder.
developments and future interests. Int J Adv Manuf Technol. Mater Des. 2019;168:107576.
2015;81:465-481. doi: 10.1016/j.matdes.2018.107576

Volume 1 Issue 1 (2025) 15 doi: 10.36922/ESAM025060005