Page 66 - ESAM-1-1

Engineering Science in
Additive Manufacturing Additive manufacturing of EH36 steels

Nakano T. Excellent mechanical and corrosion properties remanufacturing of HSLA-100 steel through the underwater
of austenitic stainless steel with a unique crystallographic laser directed energy deposition in an underwater hyperbaric
lamellar microstructure via selective laser melting. Scripta environment. Surf Coat Technol. 2022;437:128370.
Mater. 2019;159:89-93.
doi: 10.1016/j.surfcoat.2022.128370
doi: 10.1016/j.scriptamat.2018.09.017 94. Kokare S, Shen J, Fonseca PP, et al. Wire arc additive
84. Xu Z, Zhu Z, Wang P, Meenashisundaram GK, Nai SML, manufacturing of a high-strength low-alloy steel part:
Wei J. Fabrication of porous CoCrFeMnNi high entropy Environmental impacts, costs, and mechanical properties.
alloy using binder jetting additive manufacturing. Addit Int J Adv Manuf Technol. 2024;134:453-475.
Manuf. 2020;35:101441. doi: 10.1007/s00170-024-14144-z
doi: 10.1016/j.addma.2020.101441 95. Marya M, Singh V, Hascoet JY, Marya S. A metallurgical
85. Jones R, Kovarik O, Bagherifard S, Cizek J, Lang J. Damage investigation of the direct energy deposition surface repair
tolerance assessment of AM 304L and cold spray fabricated of ferrous alloys. J Mater Eng Perform. 2018;27:813-824.
316L steels and its implications for attritable aircraft. Eng doi: 10.1007/s11665-017-3117-5
Fract Mech. 2021;254:107916.
96. Barragan De Los Rios GA, Ferreira R, Mariani FE,
doi: 10.1016/j.engfracmech.2021.107916 Da Silva EJ, Coelho RT. Study of the surface roughness of
86. Guo J, Goh MH, Wang P, et al. Investigation on surface a remanufactured bimetallic AISI 1045 and 316L SS part
integrity of electron beam melted Ti-6Al-4 V by precision obtained by hybrid manufacturing (DED/HSM). Int J Adv
grinding and electropolishing. Chin J Aeronautics. Manuf Technol. 2023;124:3185-3199.
2021;34:28-38. doi: 10.1007/s00170-022-09179-z
doi: 10.1016/j.cja.2020.08.014 97. Aprameya CR, Joladarashi S, Ramesh MR. Dry linear
87. Liang Z, Qi J, Gokuldoss Prashanth K, Kang N, Wang P. reciprocating wear behavior of molybdenum-reinforced
Microstructure and mechanical properties of TiB2/Al-5Cu SS316 laser claddings deposited by laser directed energy
composites fabricated by multi-material laser powder bed deposition. Results Surf Interfaces. 2025;18:100407.
fusion. Optics Laser Technol. 2025;181:111922. doi: 10.1016/j.rsurfi.2024.100407
doi: 10.1016/j.optlastec.2024.111922 98. Li C, Peng C, Li X, et al. Initial corrosion behavior of EH36
88. Xiong XX, Liang ZX, Wang P, et al. Mechanical and thermal marine steel in simulated polar marine environment. Int J
properties of in situ AlN/Al-12Si composite fabricated by Electrochem Sci. 2022;17:22126.
laser powder bed fusion. Mater Character. 2024;210:113825. doi: 10.20964/2022.12.10
doi: 10.1016/j.matchar.2024.113825 99. Guo Z, Liu E, Wang Q, et al. Effect of Mg-Ce treatment on
89. Chen M, Yang K, Wang Z, et al. Underwater laser directed inclusion characteristics and pitting corrosion behavior in
energy deposition of NV E690 steel. Adv Powder Mater. EH420 marine steel. Metals. 2023;13:1244.
2023;2:100095. doi: 10.3390/met13071244
doi: 10.1016/j.apmate.2022.100095 100. Seifi M, Gorelik M, Waller J, et al. Progress towards
90. Zhai W, Wang P, Ng FL, Zhou W, Nai SML, Wei J. Hybrid metal additive manufacturing standardization to support
manufacturing of γ-TiAl and Ti-6Al-4V bimetal component qualification and certification. JOM. 2017;69:439-455.
with enhanced strength using electron beam melting. doi: 10.1007/s11837-017-2265-2
Compos B Eng. 2021;207:108587.
101. Kawalkar R, Dubey HK, Lokhande SP. A review for
doi: 10.1016/j.compositesb.2020.108587 advancements in standardization for additive manufacturing.
91. Wang P, Nai MLS, Lu S, Bai J, Zhang B, Wei J. Study of direct Mater Today Proc. 2022;50:1983-1990.
fabrication of a Ti-6Al-4V impeller on a wrought Ti-6Al-4V doi: 10.1016/j.matpr.2021.09.333
plate by electron beam melting. JOM. 2017;69:2738-2744.
102. Shen T, Li B. Digital twins in additive manufacturing: a state-
doi: 10.1007/s11837-017-2610-5 of-the-art review. Int J Adv Manuf Technol. 2024;131:63-92.
92. Vinoth V, Sekar T, Kumaran M. Investigations on the doi: 10.1007/s00170-024-13092-y
mechanical characteristics of the stainless steel 316L alloy 103. Herzog T, Brandt M, Trinchi A, Sola A, Molotnikov A.
fabricated by directed energy deposition for repairing Process monitoring and machine learning for defect
application. J Mater Eng Perform. 2023;32:4138-4150.
detection in laser-based metal additive manufacturing.
doi: 10.1007/s11665-023-07884-8 J Intel Manuf. 2024;35:1407-1437.
93. Wang ZD, Yang K, Chen MZ, et al. High-quality doi: 10.1007/s10845-023-02119-y

Volume 1 Issue 1 (2025) 17 doi: 10.36922/ESAM025060005