Page 56 - IJAMD-2-2

International Journal of AI for
Materials and Design ML-driven optimization in additive manufacturing

characteristics, defects, challenges and applications. Mater 54. Chung J, Shen B, Law ACC, Kong ZJ. Reinforcement
Today. 2021;49:271-295. learning-based defect mitigation for quality assurance of
additive manufacturing. J Manuf Syst. 2022;65:822-835.
doi: 10.1016/j.mattod.2021.03.020
44. Petrich J, Snow Z, Corbin D, Reutzel EW. Multi-modal doi: 10.1016/j.jmsy.2022.11.008
sensor fusion with machine learning for data-driven process 55. Wu S, Hamel CM, Ze Q, Yang F, Qi H J, Zhao R. Evolutionary
monitoring for additive manufacturing. Addit Manuf. algorithm‐guided voxel‐encoding printing of functional
2021;48:102364. hard‐magnetic soft active materials. Adv Intell Syst.
doi: 10.1016/j.addma.2021.102364 2020;2(8):2000060.
45. Ren W, Wen G, Zhang Z, Mazumder J. Quality monitoring doi: 10.1002/aisy.202000060
in additive manufacturing using emission spectroscopy 56. Miriyev A, Stack K, Lipson H. Soft material for soft actuators.
and unsupervised deep learning. Mater Manuf Process. Nat Commun. 2017;8(1):596.
2022;37(11):1339-1346.
doi: 10.1038/s41467-017-00685-3
doi: 10.1080/10426914.2021.1906891
57. Kim Y, Parada GA, Liu S, Zhao XF. Ferromagnetic soft
46. Kapusuzoglu B, Mahadevan S. Physics-informed and hybrid continuum robots. Sci Robot. 2019;4(33):eaax7329.
machine learning in additive manufacturing: Application to
fused filament fabrication. JOM. 2020;72(12):4695-4705. doi: 10.1126/scirobotics.aax7329
doi: 10.1007/s11837-020-04438-4 58. Jang EJ, Lee SY, Kim KH, Lee GY. Design and fabrication
of a millimeter-scale rotary actuator based on the twisted
47. Acharya R, Sharon JA, Staroselsky A. Prediction of shape memory alloy (SMA) wires. J Korean Soc Precis Eng.
microstructure in laser powder bed fusion process. Acta 2022;39(6):403-410.
Mater. 2017;124:360-371.
doi: 10.7736/jkspe.022.034
doi: 10.1016/j.actamat.2016.11.018
59. Seong M, Sun K, Kim S, et al. Multifunctional magnetic
48. Fergani O, Berto F, Welo T, Liang SY. Analytical modelling muscles for soft robotics. Nat Commun. 2024;15(1):7929.
of residual stress in additive manufacturing. Fatigue Fract
Eng Mater Struct. 2017;40(6):971-978. doi: 10.1038/s41467-024-52347-w
doi: 10.1111/ffe.12560 60. Jo H, Park JS, Lim HY, Lee GY. Laser sintered silver
nanoparticles on the PDMS for a wearable strain sensor
49. Chen Q, Guillemot G, Gandin CA, Bellet M. Three- capable of detecting finger motion. ACS Appl Nano Mater.
dimensional finite element thermomechanical modeling 2023;6(24):22998-23011.
of additive manufacturing by selective laser melting for
ceramic materials. Addit Manuf. 2017;16:124-137. doi: 10.1021/acsanm.3c04386
doi: 10.1016/j.addma.2017.02.005 61. Kim JH, Park S, Ahn J, et al. Meniscus‐guided micro‐
printing of prussian blue for smart electrochromic display.
50. Davoudinejad A. Vat photopolymerization methods in Adv Sci. 2023;10(3):2205588.
additive manufacturing. In: Additive Manufacturing:
Handbooks in Advanced Manufacturing. Amsterdam, The doi: 10.1002/advs.202205588
Netherlands: Elsevier. p. 159-181; 2021. 62. Kim H, Kim KH, Jeong J, Lee Y, Jung ID. Recent progress
doi: 10.1016/B978-0-12-818411-0.00007-0 on materials for functional additive manufacturing. Mat Sci
Add Manufact. 2024;3(2):3323.
51. Goh GD, Hamzah NMB, Yeong WY. Anomaly detection in
fused filament fabrication using machine learning. 3D Print doi: 10.36922/msam.3323
Addit Manuf. 2023;10(3):428-437. 63. Wickramasinghe S, Do T, Tran P. FDM-based 3D printing
doi: 10.1089/3dp.2021.0231 of polymer and associated composite: A review on
mechanical properties, defects and treatments. Polymers.
52. Zhao B, Zhang M, Dong L, Wang D. Design of grayscale 2020;12(7):1529.
digital light processing 3D printing block by machine
learning and evolutionary algorithm. Compos Commun. doi: 10.3390/polym12071529
2022;36:101395. 64. Fu Z, Angeline V, Sun W. Evaluation of printing parameters
doi: 10.1016/j.coco.2022.101395 on 3D extrusion printing of pluronic hydrogels and
machine learning guided parameter recommendation. Int J
53. Khadilkar A, Wang J, Rai R. Deep learning-based stress
prediction for bottom-up SLA 3D printing process. Int J Adv Bioprinting. 2021;7(4):434.
Manuf Technol. 2019;102:2555-2569. doi: 10.18063/ijb.v7i4.434
doi: 10.1007/s00170-019-03363-4 65. Kim Y, Yuk H, Zhao R, Chester SA, Zhao X. Printing

Volume 2 Issue 2 (2025) 50 doi: 10.36922/IJAMD025130010