Page 89 - IJB-1-1

Libiao Liu and Xiaohong Wang

Compatible Polymers, vol.25(6): 634–653. C-Methods, vol.15(1): 1–9.
http://dx.doi.org/10.1177/0883911510382571. http://dx.doi.org/10.1089/ten.tec.2008.0354
48. Yao R, Zhang R, Yan Y, et al. 2009, In vitro angiogene- 58. Cui T, Wang X, Yan Y, et al. 2009, Rapid prototyping a
sis of 3D tissue engineered adipose tissue. Journal of new polyurethane-collagen conduit and its Schwann cell
Bioactive and Compatible Polymers, vol.24(1): 5–24. compatibility. Journal of Bioactive Compatible Poly-
http://dx.doi.org/10.1177/0883911508099367. mers, vol. 24(S1): 5–7.
49. Yao R, Zhang R and Wang X, 2009, Design and evalua- http://dx.doi.org/10.1177/0883911509102349.
tion of a cell microencapsulating device for cell assem- 59. Wang X, Cui T, Yan Y, et al. 2009, Peroneal nerve re-
bly technology. Journal of Bioactive and Compatible generation using a unique bilayer polyurethane-collagen
Polymers, vol.24: 48–62. guide conduit, Journal of Bioactive and Compatible
http://dx.doi.org/10.1177/0883911509103329. Polymers, vol.24(2): 109–127.
50. Xu M, Wang X, Yan Y, et al. 2010, An cell-assembly http://dx.doi.org/10.1177/0883911508101183.
derived physiological 3D model of the metabolic syn- 60. He K, Wang X, Madhukar K S, et al. 2009, Fabrication
drome, based on adipose-derived stromal cells and a ge- of a two-level tumor bone repair biomaterial based on a
latin/alginate/fibrinogen matrix. Biomaterials, vol.31 rapid prototyping technique, Biofabrication, vol.1(2):
(14): 3868–3877. 025003.
http://dx.doi.org/10.1016/j.biomaterials.2010.01.111. http://dx.doi.org/10.1088/1758-5082/1/2/025003.
51. Xu M, Yan Y, Liu H, et al. 2009, Controlled adi- 61. He K and Wang X, 2011, Rapid prototyping of tubular
pose-derived stromal cells differentiation into adipose polyurethane and cell/hydrogel constructs, Journal of
and endothelial cells in a 3D structure established by Bioactive and Compatible Polymers, vol.26(4): 363–
cell-assembly technique. Journal of Bioactive and 374.
Compatible Polymers, vol.24(S1): 31–47. http://dx.doi.org/10.1177/0883911511412553.
http://dx.doi.org/10.1177/0883911509102794. 62. Huang Y, He K and Wang X, 2013, Rapid prototyping of
52. Li S, Yan Y, Xiong Z, et al. 2009, Gradient hydrogel a hybrid hierarchical polyurethane-cell/hydrogel con-
construct based on an improved cell assembling system. struct for regenerative medicine, Materials Science and
Journal of Bioactive and Compatible Polymers, vol.24: Engineering: C, vol.33(6): 3220–3229.
84–99. http://dx.doi.org/10.1016/j.msec.2013.03.048.
http://dx.doi.org/10.1177/0883911509103357. 63. Wang X, Rijff B and Khang G, 2015, A building block
53. Li S, Xiong Z, Wang X, et al. 2009, Direct fabrication approach into 3D printing a multi-channel organ rege-
of a hybrid cell/hydrogel construct by a double-nozzle nerative scaffold, Journal of Tissue Engineering Rege-
assembling technology. Journal of Bioactive and Com- nerative Medicine
patible Polymers, vol.24(3): 249–265. http://dx.doi.org/10.1002/term.2038.
http://dx.doi.org/10.1177/0883911509104094. 64. Lei M and Wang X, 2015, Rapid prototyping of artificial
54. Xu Y and Wang X, 2015, Fluid and cell behaviors along stomachs, in Organ Manufacturing. X Wang ed, Nova
a 3D printed alginate/gelatin/fibrin channel. Biotech-
nology and Bioengineering, vol.112(8): 1683–1695. Science Publishers Inc, New York, in press.
http://dx.doi.org/10.1002/bit.25579. 65. Xu Y, Li D and Wang X, 2015, The construction of vas-
55. Zhao X, Du S, Chai L, et al. 2015, Anti-cancer drug cularized pancreas based on 3D printing techniques, in
screening based on a adipose-derived stem cell/hepato- Organ Manufacturing. X Wang ed, Nova Science Pub-
cyte 3D printing technique. Journal of Stem Cell Re- lishers Inc, New York, in press.
search and Therapies, vol.5(4). 66. Xu Y, Li D and Wang X, 2015, Liver manufacturing ap-
http://dx.doi.org/10.4172/2157-7633.1000273. proaches: the thresholds of cell manipulation with
56. Xu W, Wang X, Yan Y, et al. 2008, A polyurethane- bio-friendly materials for multifunctional organ regene-
gelatin hybrid construct for manufacturing implantable ration, in Organ Manufacturing. X Wang ed, Nova
bioartificial livers. Journal of Bioactive and Compatible Science Publishers Inc, New York, in press.
Polymers, vol.23(5): 409–422. 67. Xu Y, Li D and Wang X, 2015, Current trends and chal-
http://dx.doi.org/10.1177/0883911508095517. lenges for producing artificial hearts, in Organ Manu-
57. Cui T K, Yan Y, Zhang R, et al. 2009, Rapid prototyping facturing. X Wang ed, Nova Science Publishers Inc,
of a double-layer polyurethane-collagen conduit for pe- New York, in press.
ripheral nerve regeneration. Tissue Engineering Part 68. Liu L and Wang X, 2015, Artificial blood vessels and

International Journal of Bioprinting (2015)–Volume 1, Issue 1 85