Page 516 - IJB-10-1

CORRIGENDUM

DOI: 10.36922/ijb.corr080123
Published Online: October 12, 2023

Correction 1
This correction aims to revise the caption of Figure 1 and the reference incorrectly cited in Figure 1 caption of “Machine
learning boosts three-dimensional bioprinting,” published in Volume 9 Issue 4 (2023) of International Journal of Bioprinting
(https://doi.org/10.18063/ijb.739).
For this purpose, the authors have obtained permission for reusing the relevant copyrighted materials in said article
from the corresponding copyright owners.
Note that all references that are supposed to be cited in place of the mistaken references in the published article are listed
herein, and the references are given new citation numbers, which should not be confused with the citation numbers already
in the published article.
Revised Figure 1 caption is as follows:

Figure 1. Type of 3D bioprinting. (A) Extrusion-based bioprinting. (B) Scaffold-free bioprinting. (C) Inkjet bioprinting.
(D) Laser-assisted bioprinting. Figure 1A, C, and D reprinted with permission from ref. ; Copyright © 2015 ASME.
[1]
Figure 1B reprinted with permission from ref. ; Copyright © 2017 Wolters Kluwer Health, Inc.
[2]
Following the revision of Figure 1 caption, it should be noted that the reference was incorrectly cited in the main
[3]
article (as reference [5]), as reference is not the original source of Figure 1A–D.
[3]
References

1. Ozbolat IT, 2015, Scaffold-based or scaffold-free bioprinting: competing or complementing approaches? J Nanotechnol Eng Med,
6(2): 024701.
doi: 10.1115/1.4030414
2. Borovjagin AV, Ogle BM, Berry JL, et al., 2017, From microscale devices to 3D printing: Advances in fabrication of 3D cardiovascular
tissues. Circ Res, 120(1): 150–165.
doi: 10.1161/CIRCRESAHA.116.308538
3. Shin J, Lee Y, Li Z, et al. 2022, Optimized 3D bioprinting technology based on machine learning: A review of recent trends and
advances. Micromachines, 13(3): 363.
doi: 10.3390/mi13030363.

Volume 10 Issue 1 (2024) 508 https://doi.org/10.36922/ijb.corr080123