Page 94 - IJB-6-3

LIFT hydrogel printing: A defined route for highly controlled process
setup. Furthermore, this setting is mainly provided 7. Gaebel R, Liu J, Koch, L, et al., 2011, Patterning Human
by easily changing variable parameters, such as Stem Cells and Endothelial Cells with Laser Printing for
laser pulse energy, laser spot size, the distance Cardiac Regeneration. Biomaterials, 32:9218–9230. DOI:
between the donor ribbon and acceptor slide, as 10.1016/j.biomaterials.2011.08.071.
well as the thickness of the hydrogel layer on the 8. Gaebel R, Kuhn S, Sorg H, et al., 2009, Laser printing of
donor ribbon. skin cells and human stem cells. Tissue Eng Part C Methods,
16:847–854. DOI: 10.1089/ten.tec.2009.0397.
Acknowledgments 9. Mandrycky C, Wang Z, Kim K, et al., 2016, 3D Bioprinting
for Engineering Complex Tissues. Biotechnol. Adv, 34:422–
This study was supported partially by the Russian 434. DOI: 10.1016/j.biotechadv.2015.12.011.
Foundation Research (19-75-00108, 3D laser 10. Koch L, Kuhn S, Sorg H, et al., 2010, Laser Printing of Skin
printing), Russian Foundation for Basic Research Cells and Human Stem Cells. Tissue Eng Part C Methods,
(18-32-20184, experimental setup and discussion 16:847–854. DOI: 10.1089/ten.tec.2009.0397.
of transfer mechanism) partially by the Ministry 11. Catros S, Fricain JC, Guillotin B, et al., 2011, Laser-assisted
of Science and Higher Education within the Bioprinting for Creating on-demand Patterns of Human
State assignment FSRC “Crystallography and Osteoprogenitor Cells and Nano-hydroxyapatite. Biofabrication,
Photonics” RAS (lift process analysis), partially 3:025001. DOI: 10.1088/1758-5082/3/2/025001.
by the Russian academic excellence project 12. Hopp B, Smausz T, Antal Z, et al., 2004, Absorbing
‘5-100’ (hydrogel support and analysis). Film Assisted Laser Induced Forward Transfer of Fungi

Conflict of interest (Trichoderma conidia). J Appl Phys, 96:3478–3481. DOI:
10.1063/1.1782275.
The authors declare no conflict of interest. 13. Yusupov VI, Zhigarkov VS, Churbanova ES, et al., 2017,
Laser-induced Transfer of Gel Microdroplets for Cell
References Printing. Quantum Electron, 47:1158–1165. DOI: 10.1070/

qel16512.
1. Serra P, Fernández-Pradas JM, Berthet FX, et al., 2004, Laser
14. Zhang Z, Xiong R, Mei R, et al,. 2015, Time-Resolved
Direct Writing of Biomolecule Microarrays. Appl Phys A Imaging Study of Jetting Dynamics during Laser Printing of
Mater Sci Process, 79:949–952. DOI: 10.1007/s00339-004- Viscoelastic Alginate Solutions. Langmuir, 31:6447–6456.
2577-2. DOI: 10.1021/acs.langmuir.5b00919.
2. Zergioti I, Karaiskou A, Papazoglou DG, et al., 2005, 15. Zhang Z, Xiong R, Corr DT, et al., 2016, Study of
Femtosecond Laser Microprinting of Biomaterials. Appl Phys Impingement Types and Printing Quality during Laser
Lett, 86:1–3. DOI: 10.1063/1.1906325. Printing of Viscoelastic Alginate Solutions. Langmuir,
3. Colina M, Serra P, Fernández-Pradas JM, et al., 2005, 32:3004–3014. DOI: 10.1021/acs.langmuir.6b00220.
DNA Deposition through Laser Induced Forward Transfer. 16. Guillotin B, Souquet A, Catros S, et al., 2010, Laser Assisted
Biosens. Bioelectron., 20(8):1638–1642. DOI: 10.1016/j. Bioprinting of Engineered Tissue with High Cell Density and
bios.2004.08.047. Microscale Organization. Biomaterials, 31:7250–7256. DOI:
4. Serra P, Colina M, Fernández-Pradas JM, et al., 2004, 10.1016/j.biomaterials.2010.05.055.
Preparation of Functional DNA Microarrays through Laser- 17. Gaebel R, Ma N, Liu J, et al., 2011, Patterning Human Stem
induced Forward Transfer. Appl Phys Lett, 85:1639–1641. Cells and Endothelial Cells with Laser Printing for Cardiac
DOI: 10.1063/1.1787614. Regeneration. Biomaterials, 32:9218–9230. DOI: 10.1016/j.
5. Cheptsov VS, Tsypina SI, Minaev NV, et al., 2019, New biomaterials.2011.08.071.
Microorganism Isolation Techniques with Emphasis on 18. Gruene M, Pflaum M, Hess C, et al., 2011, Laser Printing of
Laser Printing. Int J Bioprinting, 5:1–12. DOI: 10.18063/ijb. Three-dimensional Multicellular Arrays for Studies of Cell-
v5i1.165. cell and Cell-environment Interactions. Tissue Eng Part C
6. Koch L, Deiwick A, Schlie S, et al., 2012, Skin Tissue Methods, 17:973–982. DOI: 10.1089/ten.tec.2011.0185.
Generation by Laser Cell Printing. Biotechnol. Bioeng., 19. Koch L, Brandt O, Deiwick A, et al., 2017, Laser-assisted
109:1855–1863. DOI: 10.1002/bit.24455. Bioprinting at Different Wavelengths and Pulse Durations

90 International Journal of Bioprinting (2020)–Volume 6, Issue 3