Page 225 - IJB-8-3

Villapún, et al.
Titanium-based Antibiotic Eluting Implants. Mater Sci Eng 35. Niaki MK, Torabi SA, Nonino F, 2019, Why Manufacturers
C, 64:407–15. Adopt Additive Manufacturing Technologies: The Role of
https://doi.org/10.1016/j.msec.2016.04.006 Sustainability. J Clean Prod, 222:381–92.
25. Carter LN, Addison O, Naji N, et al., 2020, Reducing https://doi.org/10.1016/j.jclepro.2019.03.019
MRI Susceptibility Artefacts in Implants using Additively 36. Jirsák P, Brunet-Thornton R, 2019, Perspectives of Operational
Manufactured Porous Ti-6Al-4V Structures. Acta Biomater, Additive Manufacturing: Case Studies from the Czech
107:338–48. Aerospace Industry. J East Eur Cent Asian Res, 6:179–90.
https://doi.org/10.1016/j.actbio.2020.02.038 https://doi.org/10.15549/jeecar.v6i1.273
26. Harrysson OL, Cansizoglu O, Marcellin-Little DJ, et al., 37. Delic M, Eyers DR, 2020, The Effect of Additive
2008, Direct Metal Fabrication of Titanium Implants with Manufacturing Adoption on Supply Chain Flexibility and
Tailored Materials and Mechanical Properties using Electron Performance: An Empirical Analysis from the Automotive
Beam Melting Technology. Mater Sci Eng C, 28:366–73. Industry. Int J Prod Econ, 228:107689.
https://doi.org/10.1016/j.msec.2007.04.022 https://doi.org/10.1016/j.ijpe.2020.107689
27. Cox SC, Jamshidi P, Eisenstein NM, et al., 2017, Surface 38. Niaki MK, Nonino F, Palombi G, et al., 2019, Economic
Finish has a Critical Influence on Biofilm Formation and Sustainability of Additive Manufacturing: Contextual Factors
Mammalian Cell Attachment to Additively Manufactured Driving its Performance in Rapid Prototyping. J Manuf
Prosthetics. ACS Biomater Sci Eng, 3:1616–26. Technol Manage, 30:353–65
https://doi.org/10.1021/acsbiomaterials.7b00336 https://doi.org/10.1108/jmtm-05-2018-0131
28. Villapún VM, Carter LN, Gao N, et al., 2020, A Design 39. Majumdar T, Eisenstein N, Frith JE, et al., 2018, Additive
Approach to Facilitate Selective Attachment of Bacteria and Manufacturing of Titanium Alloys for Orthopedic
Mammalian Cells to Additively Manufactured Implants. Applications: A Materials Science Viewpoint. Adv Eng
Addit Manuf, 36:101528. Mater, 20:1800172.
https://doi.org/10.1016/j.addma.2020.101528 https://doi.org/10.1002/adem.201800172
29. Lowther M, Louth S, Davey A, et al., 2019, Clinical, 40. Thomas-Seale LE, Kirkman-Brown JC, Attallah MM,
Industrial, and Research Perspectives on Powder Bed Fusion et al., 2018, The Barriers to the Progression of Additive
Additively Manufactured Metal Implants. Addit Manuf, Manufacture: Perspectives from UK Industry. Int J Prod
28:565–84. Econ, 198:104–18.
https://doi.org/10.1016/j.addma.2019.05.033 https://doi.org/10.1016/j.ijpe.2018.02.003
30. Kaye R, Goldstein T, Zeltsman D, et al., 2016, Three 41. Martinez-Marquez D, Jokymaityte M, Mirnajafizadeh A,
Dimensional Printing: A Review on the Utility within et al., 2019, Development of 18 Quality Control Gates for
Medicine and Otolaryngology. Int J Pediatr Otorhinolaryngol, Additive Manufacturing of Error Free Patient-specific
89:145–148. Implants. Materials, 12:3110.
https://doi.org/10.1016/j.ijporl.2016.08.007 https://doi.org/10.3390/ma12193110
31. Eshkalak SK, Ghomi ER, Dai Y, et al., 2020, The Role of 42. Kandukuri S, Ze C, 2021, Progress of Metal AM and
Three-dimensional Printing in Healthcare and Medicine. Certification Pathway. Trans Indian Natl Acad Eng, 17:1–7.
Mater Des, 194:108940. https://doi.org/10.1007/s41403-021-00242-x
https://doi.org/10.1016/j.matdes.2020.108940 43. Bae CJ, Diggs AB, Ramachandran A, 2018, Quantification
32. Malik HH, Darwood AR, Shaunak S, et al., 2015, Hree- and certification of additive manufacturing materials and
dimensional Printing in Surgery: A Review of Current processes. In: Additive Manufacturing. Netherlands: Elsevier.
Surgical Applications. J Surg Res, 199:512–22. p181–213.
https://doi.org/10.1016/j.jss.2015.06.051 https://doi.org/10.1016/b978-0-12-812155-9.00006-2
33. Agresti A, 2003, Categorical Data Analysis. United States: 44. Jiang R, Kleer R, Piller FT, 2017, Predicting the Future of
John Wiley & Sons. p482. Additive Manufacturing: A Delphi Study on Economic
34. Lal H, Patralekh MK, 2018, 3D Printing and its Applications and Societal Implications of 3D Printing for 2030. Technol
in Orthopaedic Trauma: A Technological Marvel. J Clin Forecast Soc Change, 117:84–97.
Orthop Trauma, 9:260–8. https://doi.org/10.1016/j.techfore.2017.01.006
https://doi.org/10.1016/j.jcot.2018.07.022 45. Singh S, Ramakrishna S, Singh R, 2017, Material Issues

International Journal of Bioprinting (2022)–Volume 8, Issue 3 217