Page 258 - IJB-8-3

3D Printing and Vascularized Organ Construction
39. Rider P, Zhang Y, Tse C, et al., 2016, Biocompatible Silk 52. Leberfinger AN, Dinda S, Wu Y, et al., 2019, Bioprinting
Fibroin Scaffold Prepared by Reactive Inkjet Printing. Functional Tissues. Acta Biomater, 95:32–49.
J Mater Sci, 51:8625–30. https://doi.org/10.1016/j.actbio.2019.01.009
40. Christensen K, Xu C, Chai W, et al., 2015, Freeform Inkjet 53. Gibson I, Rosen D, Stucker B, 2015, The Impact of Low-
Printing of Cellular Structures with Bifurcations. Biotechnol Cost AM Systems. In: Additive Manufacturing Technologies.
Bioeng, 112:1047–55. 2 ed. New York, USA: Springer, p293–301.
nd
https://doi.org/10.1002/bit.25501 54. Panwar A, Tan LP, 2016, Current Status of Bioinks for Micro-
41. Wang X, Ao Q, Tian X, et al., 2016, 3D Bioprinting Extrusion-Based 3D Bioprinting. Molecules, 21:685.
Technologies for Hard Tissue and Organ Engineering. https://doi.org/10.3390/molecules21060685
Materials, 9:802. 55. Midha S, Dalela M, Sybil D, et al., 2019, Advances in 3D
https://doi.org/10.3390/ma9100802 Bioprinting of Bone: Progress and Challenges. J Tissue Eng
42. Liu F, Chen Q, Liu C, et al., 2018, Natural Polymers for Regen Med, 13:925–45.
Organ 3D Bioprinting. Ploymers, 10:1278. https://doi.org/10.1002/term.2847
https://doi.org/10.3390/polym10111278 56. Gudapati H, Dey M, Ozbolat I, 2016, A Comprehensive
43. Wang X, 2016, 3D Printing of Tissue/Organ Analogues for Review on Droplet-Based Bioprinting: Past, Present and
Regenerative Medicine. In: Handbook of Intelligent Scaffolds Future. Biomaterials, 102:20–42.
for Regenerative Medicine. 2 ed. Palo Alto, CA, USA: Pan https://doi.org/10.1016/j.biomaterials.2016.06.012
nd
Stanford Publishing, p557–70. 57. Hansen CJ, Saksena R, Kolesky DB, et al., 2013, High-
44. Liu F, Wang X, 2020, Synthetic Polymers for Organ 3D Throughput Printing Via Microvascular Multinozzle Arrays.
Printing. Polymers, 12:1765. Adv Mater, 25:96–102.
45. Li S, Tian X, Fan J, et al., 2019, Chitosans for Tissue https://doi.org/10.1002/adma.201203321
Repair and Organ Three-Dimensional (3D) Bioprinting. 58. Kim JD, Choi JS, Kim BS, et al., 2010, Piezoelectric Inkjet
Micromachines, 10:765. Printing of Polymers: Stem Cell Patterning on Polymer
https://doi.org/10.3390/mi10110765 Substrates. Polymer, 51:2147–54.
46. Wang X, Yan Y, Zhang R, 2010, Gelatin-based Hydrogels 59. Skardal A, Zhang J, Prestwich GD, 2010, Bioprinting Vessel-
for Controlled Cell Assembly. In: Ottenbrite RM, editor. Like Constructs Using Hyaluronan Hydrogels Crosslinked
Biomedical Applications of Hydrogels Handbook, New York: with Tetrahedral Polyethylene Glycol Tetracrylates.
USA: Springer, p269–84. Biomaterials, 31:6173–81.
47. Wang X, 2019, Bioartificial Organ Manufacturing https://doi.org/10.1016/j.biomaterials.2010.04.045
Technologies. Cell Transplant, 28:5–17. 60. Gruene M, Pflaum M, Hess C, et al., 2011, Laser Printing of
https://doi.org/10.1177/0963689718809918 Three-Dimensional Multicellular Arrays for Studies of Cell-
48. Wang X, Tuomi J, Mäkitie AA, et al., 2013, The Integrations Cell and Cell-Environment Interactions. Tissue Eng Part C
of Biomaterials and Rapid Prototyping Techniques Methods, 17:973–82.
for Intelligent Manufacturing of Complex Organs, In: https://doi.org/10.1089/ten.TEC.2011.0185
Lazinica R, editor. Advances in Biomaterials Science and 61. Gittard SD, Narayan RJ, 2010, Laser Direct Writing of Micro-
Applications in Biomedicine. London: InTech, p437–63. and Nano-Scale Medical Devices. Expert Rev Med Devices,
49. Zhao X, Wang X, 2013, Preparation of An Adipose-Derived 7:343–56.
Stem Cell (ADSC)/Fibrin-PLGA Construct Based on a Rapid https://doi.org/10.1586/erd.10.14
Prototyping Technique. J Bioact Compat Polym, 28:191–203. 62. Erben A, Hörning M, Hartmann B, et al., 2020, Precision
50. Zhao X, Liu L, Wang J, et al. 2014, In Vitro Vascularization 3D-Printed Cell Scaffolds Mimicking Native Tissue
of a Combined System Based on a 3D Bioprinting Technique. Composition and Mechanics. Adv Healthc Mater, 9:e2000918.
J Tissue Eng Regen Med, 10:833–42. https://doi.org/10.1002/adhm.202000918
https://doi.org/10.1002/term.1863 63. Liu L, Wang X, 2015, Creation of a Vascular System for
51. Schrepfer I, Wang X, 2015, Progress in 3D Printing Complex Organ Manufacturing. Int J Bioprinting, 1:77–86.
Technology in Health Care. In: Wang X, editor. Organ 64. Heinrich MA, Liu W, Jimenez A, et al., 2019, 3D Bioprinting:
Manufacturing. Hauppauge. New York, USA: Nova Science From Benches to Translational Applications. Small,
Publishers Inc., p29–74. 15:e1805510.

250 International Journal of Bioprinting (2022)–Volume 8, Issue 3