Page 353 - IJB-8-4

Mancilla-De-la-Cruz, et al.
https://doi.org/10.1007/s10439-016-1685-4 Translating 3D Printed Pharmaceuticals: From Hype to
118. Cui M, Pan H, Li L, et al., 2021, Exploration and Real-world Clinical Applications. Adv Drug Deliv Rev,
Preparation of Patient-specific Ciprofloxacin Implants Drug 174:553–75.
Delivery System Via 3D Printing Technologies. J Pharm https://doi.org/10.1016/j.addr.2021.05.003
Sci, 110:3678–89. 128. Kalyan BG, Kumar L, 2022, 3D Printing: Applications in
https://doi.org/10.1016/j.xphs.2021.08.004 Tissue Engineering, Medical Devices, and Drug Delivery.
119. Cui M, Pan H, Fang D, et al., 2022, 3D Printed Personalized AAPS PharmSciTech, 23:92.
Amikacin Sulfate Local Drug Delivery System for Bone https://doi.org/10.1208/s12249-022-02242-8
Defect Therapy. J Drug Deliv Sci Technol, 70:103208. 129. Morrison RJ, Kashlan KN, Flanangan CL, et al., 2015,
https://doi.org/10.1016/j.jddst.2022.103208 Regulatory Considerations in the Design and Manufacturing
120. Maher S, Kaur G, Lima-Marques L, et al., 2017, Engineering of Implantable 3D-Printed Medical Devices. Clin Transl
of Micro-to Nanostructured 3D-Printed Drug-Releasing Sci, 8:594–600.
Titanium Implants for Enhanced Osseointegration and https://doi.org/10.1111/cts.12315
Localized Delivery of Anticancer Drugs. ACS Appl Mater 130. Mohapatra S, Kar RK, Biswal PK, et al., 2022, Approaches
Interfaces, 9:29562–70. of 3D Printing in Current Drug Delivery. Sensors Int,
https://doi.org/10.1021/acsami.7b09916 3:100146.
121. Parry JA, Olthof MG, Shogren KL, et al., 2017, Three- https://doi.org/10.1016/j.sintl.2021.100146
Dimension-Printed Porous Poly (Propylene Fumarate) 131. Varghese R, Sood P, Salvi S, et al., 2022, 3D Printing in the
Scaffolds with Delayed rhBMP-2 Release for Anterior Pharmaceutical Sector: Advances and Evidences. Sensors
Cruciate Ligament Graft Fixation. Tissue Eng Part A, Int, 3:100177.
23:359–65. https://doi.org/10.1016/j.sintl.2022.100177
https://doi.org/10.1089/ten.tea.2016.0343 132. Ng WL, Lee JM, Zhou M, et al., 2020, Vat polymerization
122. Huang W, Zheng Q, Sun W, et al., 2007, Levofloxacin Based Bioprinting-process, Materials, Applications and
Implants with Predefined Microstructure Fabricated by Regulatory Challenges. Biofabrication, 12:022001.
Three-dimensional Printing Technique. Int J Pharm, https://doi.org/10.1088/1758-5090/ab6034
339:33–8. 133. Smith J, Shanler M, 2021, Hype Cycle for Life Science
https://doi.org/10.1016/j.ijpharm.2007.02.021 Research and Development, 2021. Stamford: Gartner
123. Xu X, Goyanes A, Trenfield SJ, et al., 2021, Stereolithography Research. p1–128.
(SLA) 3D Printing of a Bladder Device for Intravesical Drug 134. Ong JJ, Muniz B, Gaisford S, et al., 2022, Accelerating
Delivery. Mater Sci Eng C Mater Biol Appl, 120:111773. 3D Printing of Pharmaceutical Products using Machine
https://doi.org/10.1016/j.msec.2020.111773 Learning. Int J Pharm, 4:100120.
124. Soetedjo AA, Lee JM, Lau HH, et al., 2021, Tissue https://doi.org/10.1016/j.ijpx.2022.100120
Engineering and 3D Printing of Bioartificial Pancreas for 135. Yu C, Jiang J, 2020, A Perspective on using Machine
Regenerative Medicine in Diabetes. Trends Endocrinol Learning in 3D Bioprinting. Int J Bioprint, 6:253.
Metab, 32:609–22. https://doi.org/10.18063/ijb.v6i1.253
https://doi.org/10.1016/j.tem.2021.05.007 136. Lao W, Li M, Wong TN, et al., 2020, Improving Surface
125. Dhavalikar P, Lan Z, Kar R, et al., 2020, 1.4.8-Biomedical Finish Quality in Extrusion-based 3D Concrete Printing
Applications of Additive Manufacturing. Biomater Sci using Machine Learning-based Extrudate Geometry
(Fourth Ed), 623–39. Control. Virtual Phys Prototyp, 15:178–93.
https://doi.org/10.1016/B978-0-12-816137-1.00040-4 137. Ng WL, Chan A, Ong YS, et al., 2020, Deep Learning for
126. Barua R, Datta S, Roychowdhury A, et al., 2019, “Importance Fabrication and Maturation of 3D Bioprinted Tissues and
of 3D printing technology in medical fields”. In: Zindani D, Organs. Virtual Phys Prototyp, 15:340–58.
Paulo J, Kumar DK, editors. Additive Manufacturing 138. Sing SL, Kuo CN, Shih CT, et al., 2021, Perspectives of
Technologies From an Optimization Perspective. United using Machine Learning in Laser Powder Bed Fusion for
States: IGI Global. p21–40. Metal Additive Manufacturing. Virtual Phys Prototyp,
https://doi.org/10.4018/978-1-5225-9167-2.ch002 16:372–86.
127. Seoane-Viano I, Trenfield SJ, Basit AW, et al., 2021, 139. Lyu J, Manoochehri S, 2021, Online Convolutional Neural

International Journal of Bioprinting (2022)–Volume 8, Issue 4 345