Page 351 - IJB-8-4

Mancilla-De-la-Cruz, et al.
Substrates-Effect of Print Density in Inkjet Printing. Int J https://doi.org/10.1016/j.ijpharm.2017.04.077
Pharm, 453:488–97. 87. Wei Y, Li-Tsang CW, Liu J, et al., 2017, 3D-Printed Transparent
https://doi.org/10.1016/j.ijpharm.2013.06.003 Facemasks in the Treatment of Facial Hypertrophic Scars of
77. Meléndez P, Kane K, Ashvar C, et al., 2008, Thermal Inkjet Young Children with Burns. Burns, 43:e19–26.
Application in the Preparation of Oral Dosage Forms: https://doi.org/10.1016/j.burns.2016.08.034
Dispensing of Prednisolone Solutions and Polymorphic 88. Azizoglu E, Ozer O, 2020, Fabrication of Montelukast
Characterization by Solid-State Spectroscopic Techniques. Sodium Loaded Filaments and 3D Printing Transdermal
J Pharm Sci, 97:2619–36. Patches onto Packaging Material. Int J Pharm, 587:119588.
https://doi.org/10.1002/jps.21189 https://doi.org/10.1016/j.ijpharm.2020.119588
78. Takala M, Helkiö H, Sundholm J, et al., 2012, Ink-jet Printing 89. Teoh JH, Tay SM, Fuh J, et al., 2022, Fabricating Scalable,
of Pharmaceuticals. In: 8 International DAAAM Baltic Personalized Wound Dressings with Customizable Drug
th
Conference. p233–9. Loadings via 3D Printing. J Controlled Release, 341:80–94.
79. Wimmer-Teubenbacher M, Planchette C, Pichler H, et al., https://doi.org/10.1016/j.jconrel.2021.11.017
2018, Pharmaceutical-grade Oral Films as Substrates for 90. Sun Y, Ruan X, Li H, et al., 2016, Fabrication of Non-
Printed Medicine. Int J Pharm, 547:169–80. dissolving Analgesic Suppositories using 3D Printed Moulds.
https://doi.org/10.1016/j.ijpharm.2018.05.041 Int J Pharm, 513:717–24.
80. Thabet Y, Lunter D, Breitkreutz J, 2018, Continuous Inkjet https://doi.org/10.1016/j.ijpharm.2016.09.073
Printing of Enalapril Maleate onto Orodispersible Film 91. Chatzitaki AT, Tsongas K, Tzimtzimis EK, et al., 2021, 3D
Formulations. Int J Pharm, 546:180–7. Printing of Patient-Tailored SNEDDS-based Suppositories of
https://doi.org/10.1016/j.ijpharm.2018.04.064 Lidocaine. J Drug Deliv Sci Technol, 61:102292.
81. Boudriau S, Hanzel C, Massicotte J, et al., 2016, Randomized https://doi.org/10.1016/j.jddst.2020.102292
Comparative Bioavailability of a Novel Three-dimensional 92. Holländer J, Genina N, Jukarainen H, et al., 2016, Three-
Printed Fast-Melt Formulation of Levetiracetam Following Dimensional Printed PCL-Based Implantable Prototypes of
the Administration of a Single 1000-mg Dose to Healthy Medical Devices for Controlled Drug Delivery. J Pharm Sci,
Human Volunteers Under Fasting and Fed Conditions. Drugs 105:2665–76.
R D, 16:229–38. https://doi.org/10.1016/j.xphs.2015.12.012
https://doi.org/10.1007/s40268-016-0132-1 93. Genina N, Holländer J, Jukarainen H, et al., 2016, Ethylene
82. Jamróz W, Kurek M, Łyszczarz E, et al., 2017, 3D Printed Vinyl Acetate (EVA) as a New Drug Carrier for 3D Printed
Orodispersible Films with Aripiprazole. Int J Pharm, Medical Drug Delivery Devices. Eur J Pharm Sci, 90:53–63.
533:413–20. https://doi.org/10.1016/j.ejps.2015.11.005
https://doi.org/10.1016/j.ijpharm.2017.05.052 94. Tappa K, Jammalamadaka U, Ballard D, et al., 2017,
83. Sjöholm E, Sandler N, 2019, Additive Manufacturing of Medication Eluting Devices for the Field of OBGYN
Personalized Orodispersible Warfarin Films. Int J Pharm, (MEDOBGYN): 3D Printed Biodegradable Hormone
564:117–23. Eluting Constructs, a Proof of Concept Study. PLoS One,
https://doi.org/10.1016/j.ijpharm.2019.04.018 12:e0182929.
84. He S, Radeke C, Jacobsen J, et al., 2021, Multi-material https://doi.org/10.1371/journal.pone.0182929
3D Printing of Programmable and Stretchable Oromucosal 95. Eder S, Wiltschko L, Koutsamanis I, et al., 2022, Toward
Patches for Delivery of Saquinavir. Int J Pharm, 610:121236. a New Generation of Vaginal Pessaries via 3D-printing:
https://doi.org/10.1016/j.ijpharm.2021.121236 Concomitant Mechanical Support and Drug Delivery. Eur J
85. Goyanes A, Det-Amornrat U, Wang J, et al., 2016, 3D Pharm Biopharm, 174:77–89.
Scanning and 3D Printing as Innovative Technologies for https://doi.org/10.1016/j.ejpb.2022.04.001
Fabricating Personalized Topical Drug Delivery Systems. 96. Indurkhya A, Patel M, Sharma P, et al., 2018, Chapter 6
J Controlled Release, 234:41–8. Influence of Drug Properties and Routes of Drug
https://doi.org/10.1016/j.jconrel.2016.05.034 Administration on the Design of Controlled Release System.
86. Muwaffak Z, Goyanes A, Clark V, et al., 2017, Patient-specific Adv Pharm Prod Dev Res, i:179–223.
3D Scanned and 3D Printed Antimicrobial Polycaprolactone https://doi.org/10.1016/B978-0-12-814423-7.00006-X
Wound Dressings. Int J Pharm, 527:161–70. 97. Kim YC, Park JH, Prausnitz MR, 2012, Microneedles for

International Journal of Bioprinting (2022)–Volume 8, Issue 4 343