Page 115 - JCAU-7-3
P. 115

Journal of Chinese
            Architecture and Urbanism                                          Seismic performance of reinforced SSPWs



               shear walls. Structures, 38:848-860.               https://doi.org/10.1061/JSENDH.STENG-12074
               https://doi.org/10.1016/j.istruc.2022.02.020    Labibzadeh, M., & Khayat, M. (2023). Damage assessment of
            Basler, K. (1961). Strength of plate girders in shear. Journal of the   stiffened steel plate shear walls with different configurations
               Structural Division, 87(7):151-180.                under far-fault and near-fault ground motions.  Journal of
                                                                  Constructional Steel Research, 200:107685.
               https://doi.org/10.1061/JSDEAG.000069
                                                                  https://doi.org/10.1016/j.jcsr.2022.107685
            Beyranvand, S.,  & Hosseini, M.  (2022). Studying  the effect  of
               thickness, diameter, and arrangement of hemispherical   Lubell, A. S., Prion, H. G., Ventura, C. E., & Rezai, M. (2000).
               ridges in steel shear walls. Journal of Civil Engineering and   Unstiffened steel plate shear wall performance under cyclic
               Structures, 6(1):13-17.                            loading. Journal of structural Engineering, 126(4):453-460.
               https://doi.org/10.21859/jces.6142                 https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(453)
            Chen, Z., Amer, M., Du, Y., Mashrah, W. A. H., Zhao, B., &   Mimura, H., & Akiyama, H. (1977). Load-deflection relationship
               Huang, J. (2023). Experimental and numerical study on   of earthquake resistant steel shear walls with a developed
               seismic performance of square and l-shaped Concrete-filled   diagonal tension field. Transactions of AIJ, 260:109-114.
               steel tubes column Frame-Buckling steel plate shear walls.      https://doi.org/10.3130/AIJSAXX.260.0_109
               Engineering Structures, 274:115155.
                                                               Nayel, I. H., Broujerdian, V., & Ghamari, A. (2022). Investigating
               https://doi.org/10.1016/j.engstruct.2022.115155    the behavior of semi-supported steel plate shear walls
            Driver, R. G., Kulak, G. L., Kennedy, D. L., & Elwi, A. E. (1998).   compounded of two flat and two corrugated plates:
               Cyclic test of four-story steel plate shear wall.  Journal of   A numerical and parametrical study. International Journal of
               Structural Engineering, 124(2):112-120.            Civil Engineering, 20(10):1197-1210.
               https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(112)     https://doi.org/10.1007/s40999-022-00726-z

            Ebadi-Jamkhaneh, M., & Kontoni, D. P. N. (2022). Numerical   Newmark, N. M., & Hall, W. J. (1982). Earthquake Spectra and
               finite element investigation of thin steel shear walls   Design.  Engineering Monographs On Earthquake Criteria.
               retrofitted with CFRP layers under reversed cyclic loading.   Oakland, CA: Earthquake Engineering Research Institute.
               Journal of Building Pathology and Rehabilitation, 7(1):62.
                                                               Parvizi, M., Fathi, M., Zamani, S. S. M., Shakib, H., & Karami, A.
               https://doi.org/10.1007/s41024-022-00200-2         (2022). Experimental and numerical study of concrete
                                                                  frames with steel plate shear walls. Journal of Constructional
            Elgaaly, M., & Liu, Y. (1997). Analysis of thin-steel-plate shear
               walls. Journal of Structural Engineering, 123(11):1487-1496.  Steel Research, 196:107404.
               h t t ps://do i .o r g/10.1061/(A SCE)0733-        https://doi.org/10.1016/j.jcsr.2022.107404
               9445(1997)123:11(1487)                          Qiao, W., Zhang, X., Xu, Q., & Wang, G. (2023). Seismic
            Es’haghioskui, F., Asl, M. H., Hosseinzadeh, Y., & Gallego, E.   performance of  thin-walled steel and concrete composite
               (2023). Experimental and numerical investigation of a   column-corrugated steel shear wall structure.  Journal of
               new  type  of  steel  plate  shear  wall  with  diagonal  tension   Constructional Steel Research, 201:107745.
               field guiding stiffeners.  Journal of Building Engineering,      https://doi.org/10.1016/j.jcsr.2022.107745
               76:107181.
                                                               Sabouri-Ghomi, S., & Gholhaki, M. (2008). Ductility of thin steel
               https://doi.org/10.1016/j.jobe.2023.107181         plate shear walls. Asian Journal of Civil Engineering (Building
            Ghamari, A., & Johari Naeimi, A. (2023). Investigating the seismic   and Housing), 9(2):153-166.
               behaviour of high-performance steel plate shear walls.      https://doi.org/10.1061/41016(314)109
               Proceedings of the Institution of Civil Engineers-Structures
               and Buildings, 176(3):177-189.                  Shi, Y., Luo, Z., Xu, Y., Zou, Y., Xu, L., & Ma, Q. (2022).
                                                                  Experimental study on the seismic behavior of high-
               https://doi.org/10.1680/jstbu.20.00108             performance cold-formed steel plate shear walls. Engineering
            Hao, J., Li, S., Tian, W., & Wu, X. (2023). Seismic performance   Structures, 251:113552.
               of coupled steel plate shear wall with slits.  Journal of      https://doi.org/10.1016/j.engstruct.2021.113552
               Constructional Steel Research, 201:107674.
                                                               Takahashi, Y., Takemoto, Y., Takeda, T., & Takagi, M. (1973).
               https://doi.org/10.1016/j.jcsr.2022.107674         Experimental study on thin steel shear walls and particular
            Je Too, R. Y., & Isoda, H. (2023). Seismic performance of CLT   bracings under alternative horizontal load. In: Preliminary
               shear wall infilled hybrid steel frames with concealed steel   Report, IABSE, Symp. On Resistance and Ultimate
               plates  and  drift  pin  connections.  Journal of Structural   Deformability of Tsructures Acted on by Well-defined
               Engineering, 149(9):04023111.                      Repeated Loads. Lisbon, Portugal: IABSE, p. 185-191.


            Volume 7 Issue 3 (2025)                         13                       https://doi.org/10.36922/jcau.5781
   110   111   112   113   114   115   116   117   118   119   120