Page 76 - MSAM-1-2

Materials Science in Additive Manufacturing Cold spray additive manufacturing of Cu-based materials

TiB2-Cu: Consolidation and erosion behavior. J Mater Sci, 69. Munro RG, 2000, Material properties of titanium diboride.
40: 3491–3495. J Res Natl Inst Stand Technol, 105: 709.
https://doi.org/10.1007/s10853-005-2854-2 https://doi.org/10.6028/jres.105.057
67. Agarwal A, Dahotre NB, Sudarshan TS, 1999, Evolution of 70. Kim JS, Kwon YS, Lomovsky OI, et al., 2007, Cold spraying
interface in pulsed electrode deposited titanium diboride on of in situ produced TiB -Cu nanocomposite powders. Comp
2
copper and steel. Surf Eng, 15: 27–32. Sci Technol, 67: 2292–2296.
https://doi.org/10.1179/026708499322911601 https://doi.org/10.1016/j.compscitech.2007.01.019
68. Tu J, Wang NY, Yang YZ, et al., 2002, Preparation and 71. Calli C, Tazegul O, Kayali ES, 2017, Wear and corrosion
properties of TiB nanoparticle reinforced copper matrix characteristics of copper-based composite coatings. Ind
2
composites by in situ processing. Mater Lett, 52: 448–452. Lubr Tribol, 69: 300–305.
https://doi.org/10.1016/S0167-577X(01)00442-6 https://doi.org/10.1108/ILT-07-2016-0146

Volume 1 Issue 2 (2022) 20 https://doi.org/10.18063/msam.v1i2.12