Page 38 - MSAM-1-3

Materials Science in Additive Manufacturing Photocatalytic PA6/TiO powder for LPBF
2

References https://doi.org/10.1016/j.cej.2020.125347

1. Chen XB, Liu L, Huang FQ, 2015, Black titanium dioxide 12. Carp O, Huisman CL, Reller A, 2004, Photoinduced
(Ti ) nanomaterials. Chem Soc Rev, 44: 1861–1885. reactivity of titanium dioxide. Prog Solid State Chem,
O2 32: 33–177.
https://doi.org/10.1039/c4cs00330f
https://doi.org/10.1016/j.progsolidstchem.2004.08.001
2. Hu X, Hu XJ, Peng QQ, et al., 2020, Mechanisms underlying
the photocatalytic degradation pathway of ciprofloxacin 13. Fattakhova-Rohlfing D, Zaleska A, Bein T, 2014, Three-
with heterogeneous TiO . Chem Eng J, 380: 122366. dimensional titanium dioxide nanomaterials. Chem Rev,
2 114: 9487–9558.
https://doi.org/10.1016/j.cej.2019.122366
https://doi.org/10.1021/cr500201c
3. Wang D, Zhi T, Liu LH, et al., 2022, 3D printing of TiO nano
2
particles containing macrostructures for As(III) removal in 14. Yang L, Yan C, Fan H, et al., 2019, Investigation on the
water. Sci Total Environ, 815: 152754. orientation dependence of elastic response in Gyroid cellular
structures. J Mech Behav Biomed Mater, 90: 73–85.
https://doi.org/10.1016/j.scitotenv.2021.152754
https://doi.org/10.1016/j.jmbbm.2018.09.042
4. Kamrannejad MM, Hasanzadeh A, Nosoudi N, et al., 2014,
Photocatalytic degradation of polypropylene/TiO nano- 15. Yang L, Yan C, Han C, et al., 2018, Mechanical response
2
composites. Mater Res Am J Mater, 17: 1039–1046. of a triply periodic minimal surface cellular structures
manufactured by selective laser melting. Int J Mech Sci,
https://doi.org/10.1590/1516-1439.267214 148: 149–157.
5. Li Z, Liu Z, Yang X, et al. 2022, Enhanced photocatalysis https://doi.org/10.1016/j.ijmecsci.2018.08.039
of black TiO /graphene composites synthesized by a facile 16. Skorski MR, Esenther JM, Ahmed Z, et al., 2016, The
2
Sol–Gel method combined with hydrogenation process. chemical, mechanical, and physical properties of 3D printed
Materials, 15: 3336.
materials composed of TiO -ABS nanocomposites. Sci
2
https://doi.org/10.3390/ma15093336 Technol Adv Mater, 17: 89–97.
6. Shuai C, Shuai C, Feng P, et al., 2018, Antibacterial capability, https://doi.org/10.1080/14686996.2016.1152879
physicochemical properties, and biocompatibility of nTiO( ) 17. Chen P, Su J, Wang H, et al., 2022, Mechanical properties
2
incorporated polymeric scaffolds. Polymers (Basel), 10: 328. and microstructure characteristics of lattice-surfaced PEEK
https://doi.org/10.3390/polym10030328 cage fabricated by high-temperature laser powder bed
fusion. J Mater Sci Technol, 125: 105–117.
7. Kayaci F, Vempati S, Ozgit-Akgun C, et al., 2014, Selective
isolation of the electron or hole in photocatalysis: ZnO- https://doi.org/10.1016/j.jmst.2022.03.009
TiO and TiO -ZnO core-shell structured heterojunction 18. Chen P, Wang H, Su J, et al., 2022, Recent advances on high-
2
2
nanofibers via electrospinning and atomic layer deposition. performance polyaryletherketone materials for additive
Nanoscale, 6: 5735–5745. manufacturing. Adv Mater, 2200750.
https://doi.org/10.1039/c3nr06665g https://doi.org/10.1002/adma.202200750
8. Xu XY, Wang M, Lin L, et al., 2015, Efficient visible-light 19. Yang L, Wu S, Yan C, et al., 2021, Fatigue properties of
photocatalysts from sensitized TiO nanospheres. Mater Sci Ti-6Al-4V Gyroid graded lattice structures fabricated by
2
Forum, 814: 31–38. laser powder bed fusion with lateral loading. Addit Manuf,
https://doi.org/10.4028/www.scientific.net/msf.814.31 46: 102214.
9. Shuang S, Lv R, Xie Z, et al., 2016, Surface plasmon enhanced https://doi.org/10.1016/j.addma.2021.102214
photocatalysis of Au/Pt-decorated TiO nanopillar arrays. 20. Wu S, Yang L, Wang C, et al., 2022, Ceramic lattices with a
2
Sci Rep, 6: 26670. triply periodic minimal surface structure prepared by laser
https://doi.org/10.1038/srep26670 powder bed fusion. Addit Manuf, 56: 102910.
10. Wang DH, Jia L, Wu XL, et al., 2012, One-step hydrothermal https://doi.org/10.1016/j.addma.2022.102910
synthesis of N-doped TiO2/C nanocomposites with high 21. Hussein A, Hao L, Yan C, et al., 2013, Young, advanced
visible light photocatalytic activity. Nanoscale, 4: 576–584. lattice support structures for metal additive manufacturing.
https://doi.org/10.1039/c1nr11353d J Mater Process Tech, 213:1019–1026.
11. Wang Q, Zhang LX, Guo YK, et al., 2020, Multifunctional 2D https://doi.org/10.1016/j.jmatprotec.2013.01.020
porous g-C3N4 nanosheets hybridized with 3D hierarchical 22. Yan C, Hao L, Hussein A, et al., 2012, Evaluations of cellular
TiO microflowers for selective dye adsorption, antibiotic lattice structures manufactured using selective laser melting.
2
degradation and CO reduction. Chem Eng J, 396: 125347. Int J Machine Tools Manuf, 62: 32–38.
2
Volume 1 Issue 3 (2022) 9 https://doi.org/10.18063/msam.v1i3.14