Page 39 - MSAM-1-3

Materials Science in Additive Manufacturing Photocatalytic PA6/TiO powder for LPBF
2

https://doi.org/10.1016/j.ijmachtools.2012.06.002 28. Su J, Hua S, Chen A, et al., 2021, Three-dimensional printing
of gyroid-structured composite bioceramic scaffolds with
23. Chen P, Wu H, Zhu W, et al., 2018, Investigation into the
processability, recyclability and crystalline structure of tuneable degradability. Mater Sci Eng C, 133: 112595.
selective laser sintered polyamide 6 in comparison with https://doi.org/10.1016/j.msec.2021.112595
polyamide 12. Polym Test, 69: 366–374.
29. Salmoria GV, Leite JL, Vieira LF, et al., 2012, Mechanical
https://doi.org/10.1016/j.polymertesting.2018.05.045 properties of PA6/PA12 blend specimens prepared by
24. Chen B, Berretta S, Davies R, et al., 2019, Characterisation selective laser sintering. Polym Test, 31: 411–416.
of carbon fibre (Cf) Poly Ether Ketone (PEK) composite https://doi.org/10.1016/j.polymertesting.2011.12.006
powders for laser sintering. Polym Test, 76: 65–72.
30. Salmoria GV, Leite JL, Paggi RA, 2009, The microstructural
https://doi.org/10.1016/j.polymertesting.2019.03.011 characterization of PA6/PA12 blend specimens fabricated by
25. Chen B, Wang Y, Berretta S, et al., 2017, Poly aryl ether selective laser sintering. Polym Test, 28: 746–751.
ketones (PAEKs) and carbon-reinforced PAEK powders for https://doi.org/10.1016/j.polymertesting.2009.06.010
laser sintering. J Mater Sci, 52: 6004–6019.
31. Wang H, Chen P, Wu H, et al., 2022, Comparative evaluation
https://doi.org/10.1007/s10853-017-0840-0 of printability and compression properties of poly-ether-
26. Berretta S, Ghita O, Evans KE, 2014, Morphology of ether-ketone triply periodic minimal surface scaffolds
polymeric powders in laser sintering (LS): From polyamide fabricated by laser powder bed fusion. Addit Manuf,
to new PEEK powders. Eur Polym J, 59: 218–229. 57: 102961.
https://doi.org/10.1016/j.eurpolymj.2014.08.004 https://doi.org/10.1016/j.addma.2022.102961
27. Chen P, Su J, Wang H, et al., 2022, Aging mechanism of 32. Guo B, Xu Z, Luo X, et al., 2021, A detailed evaluation of
polyetheretherketone powder during layer-wise infrared surface, thermal, and flammable properties of polyamide
radiation of high-temperature laser powder bed fusion. 12/glass beads composites fabricated by multi jet fusion.
Mater Des, 213: 110348. Virtual Phys Prototy, 16: S39–S52.
https://doi.org/10.1016/j.matdes.2021.110348 https://doi.org/10.1080/17452759.2021.1899463

Volume 1 Issue 3 (2022) 10 https://doi.org/10.18063/msam.v1i3.14