Page 6 - MSAM-1-3

September 2022 ǀ Volume 1 ǀ Issue 3 ǀ

Materials Science in Additive Manufacturing

https://msam.whioce.com/index.php/MSAM/index

CONTENTS

1 Biodegradable materials: Foundation of transient and sustainable REVIEW ARTICLE
electronics
Monisha Monisha, Shweta Agarwala

http://doi.org/10.18063/msam.v1i3.15

2 Preparation of polyamide 6 and its titanium dioxide photocatalytic ORIGINAL RESEARCH
composite powders for laser powder bed fusion ARTICLE
Peng Chen, Zhaoqing Li, Sheng Liu, Jin Su, Haoze Wang, Lei Yang, Chunze Yan, Yusheng
Shi

https://doi.org/10.18063/msam.v1i3.14

3 Optimizing of chemical admixtures for 3D printable cementitious ORIGINAL RESEARCH
materials by central composite design ARTICLE
Mingyang Li, Yiwei Weng, Zhixin Liu, Dong Zhang, Teck Neng Wong

https://doi.org/10.18063/msam.v1i3.16

4 Characterization of triply periodic minimal surface structures obtained ORIGINAL RESEARCH
using toolpath-based construction design ARTICLE
Shujie Tan, Xi Zhang, Ziyu Wang, Liping Ding, Wenliang Chen, Yicha Zhang

https://doi.org/10.18063/msam.v1i3.17

5 Inconel 718-CoCrMo bimetallic structures through directed energy ORIGINAL RESEARCH
deposition-based additive manufacturing ARTICLE
Cory Groden, Victor Champagne, Susmita Bose, Amit Bandyopadhyay

https://doi.org/10.18063/msam.v1i3.18

6 Advanced software development of 2D and 3D model visualization for ORIGINAL RESEARCH
TwinPrint, a dual-arm 3D bioprinting system for multi-material printing ARTICLE
Shaddin AlZaid, Noofa Hammad, Hamed I. Albalawi, Zainab N. Khan, Eter Othman, Charlotte
A. E. Hauser

http://doi.org/10.18063/msam.v1i3.19

7 Increasing density and mechanical performance of binder jetting ORIGINAL RESEARCH
processing through bimodal particle size distribution ARTICLE
Ana Paula Clares, Yawei Gao, Ryan Stebbins, Adri C.T. van Duin, Guha Manogharan

https://doi.org/10.18063/msam.v1i3.20

iv