Page 70 - MSAM-1-3

Materials Science in Additive Manufacturing Inconel 718-CoCrMo bimetallic structures

Funding 6. Bandyopadhyay A, Zhang Y, Onuike B, 2022, Additive
manufacturing of bimetallic structures. Virtual Phys
The authors want to acknowledge financial support from Prototyp, 17: 256–294.
the Army Research Laboratory under grant number
W911NF2020206. The views and conclusions contained https://doi.org/10.1080/17452759.2022.2040738
in this document are those of the authors and should not 7. Zhang Y, Bandyopadhyay A, 2019, Direct fabrication
be interpreted as representing the official policies, either of bimetallic Ti6Al4V+Al12Si structures via additive
expressed or implied, of the Army Research Laboratory or manufacturing. Addit Manuf, 29: 100783.
the U.S. Government. The U.S. Government is authorized https://doi.org/10.1016/j.addma.2019.100783
to reproduce and distribute reprints for Government 8. Afrouzian A, Groden CJ, Field DP, et al., 2022, Additive
purposes, notwithstanding any copyright notation herein. manufacturing of Ti-Ni bimetallic structures. Mater Des,
215: 110461.
Conflict of interest
https://doi.org/10.1016/j.matdes.2022.110461
The authors declare no conflicts of interest.
9. Yao L, Huang S, Ramamurty U, et al., 2021, On the formation
Author contributions of “Fish-Scale” morphology with curved grain interfacial
microstructures during selective laser melting of dissimilar
Conceptualization: Victor Champagne, Amit Bandyopadhyay alloys. Acta Mater, 220: 117331.
Data curation: Cory Groden https://doi.org/10.1016/j.actamat.2021.117331
Funding acquisition: Susmita Bose, Amit Bandyopadhyay
Investigation: Cory Groden 10. Sing SL, Huang S, Goh GD, et al., 2021, Emerging metallic
Supervision: Susmita Bose, Amit Bandyopadhyay systems for additive manufacturing: In-situ alloying and
multi-metal processing in laser powder bed fusion. Prog
Writing – original draft: Cory Groden Mater Sci, 119: 100795.
Writing – review & editing: Victor Champagne, Susmita
Bose, Amit Bandyopadhyay https://doi.org/10.1016/j.pmatsci.2021.100795
11. Wang Z, Wang J, Xu S, et al., 2022, Influence of powder
References characteristics on microstructure and mechanical properties
1. Kim IH, Jung YI, Kim HG, et al., 2021, Oxidation-resistant of inconel 718 superalloy manufactured by direct energy
coating of FeCrAl on Zr-alloy tubes using 3D printing direct deposition. Appl Surf Sci, 583: 152545.
energy deposition. Surf Coat Technol, 411: 126915. https://doi.org/10.1016/j.apsusc.2022.152545
https://doi.org/10.1016/j.surfcoat.2021.126915 12. Hosseini E, Popovich VA, 2019, A review of mechanical
2. Shang F, Chen S, Zhou L, et al., 2021, Effect of laser energy properties of additively manufactured inconel 718. Addit
volume density on wear resistance and corrosion resistance Manuf, 30: 100877.
of 30Cr15MoY alloy steel coating prepared by laser direct https://doi.org/10.1016/j.addma.2019.100877
metal deposition. Surf Coat Technol, 421: 127382.
13. Cao GH, Sun TY, Wang CH, et al., 2018, Investigations
https://doi.org/10.1016/j.surfcoat.2021.127382 of Γ’, Γ” and δ precipitates in heat-treated inconel 718
3. Groden C, Traxel KD, Afrouzian A, et al., 2022, Inconel alloy fabricated by selective laser melting. Mater Charact,
718-W7Ni3Fe bimetallic structures using directed energy 136: 398–406.
deposition-based additive manufacturing. Virtual Phys https://doi.org/10.1016/j.matchar.2018.01.006
Prototyp 17: 170–180.
14. Wan HY, Zhou ZJ, Li CP, et al., 2018, Enhancing fatigue
https://doi.org/10.1080/17452759.2022.2025673 strength of selective laser melting-fabricated inconel 718 by
4. Onuike B, Heer B, Bandyopadhyay A, 2018, Additive tailoring heat treatment route. Adv Eng Mater 20: 1800307.
manufacturing of inconel 718-copper alloy bimetallic https://doi.org/10.1002/adem.201800307
structure using laser engineered net shaping (LENS ). 15. Ling LS, Yin Z, Hu Z, et al., 2019, Effects of the Γ”-Ni(3)Nb
TM
Addit Manuf, 21: 133–140.
phase on mechanical properties of inconel 718 superalloys
https://doi.org/10.1016/j.addma.2018.02.007 with different heat treatments. Materials (Basel, Switzerland),
13: 151.
5. Traxel KD, Bandyopadhyay A, 2021, Modeling and
experimental validation of additively manufactured https://doi.org/10.3390/ma13010151
tantalum-titanium bimetallic interfaces. Mater Des, 16. Teixeira Ó, Silva FJ, Atzeni E, 2021, Residual stresses and
207: 109793.
heat treatments of inconel 718 parts manufactured via metal
https://doi.org/10.1016/j.matdes.2021.109793 laser beam powder bed fusion: An overview. Int J Adv Manuf

Volume 1 Issue 3 (2022) 7 https://doi.org/10.18063/msam.v1i3.18