Page 75 - MSAM-1-4

Materials Science in Additive Manufacturing Survey of AM reviews

Table 2. (Continued)
Category Keywords Article title First author References
drug delivery; healthcare Advances in powder bed fusion 3D printing in drug Awad et al. [67]
delivery and healthcare
Process monitoring; In-situ sensing, process monitoring and machine control McCann et al. [49]
machine control in Laser Powder Bed Fusion: A review
Binder jetting Stainless steel A review on binder jet additive manufacturing of 316L Mirzababaei [68]
stainless steel and Pasebani
Material extrusion Process–Structure– Process–Structure–Properties in Polymer Additive Goh et al. [69]
Properties Manufacturing via Material Extrusion: A Review
Dimensional inaccuracy; Material extrusion-based additive manufacturing Spoerk et al. [70]
warpage of polypropylene: A review on how to improve
dimensional inaccuracy and warpage
Fiber-reinforced polymers Fused filament fabrication of fiber-reinforced polymers: Brenken et al. [71]
A review
Plant biopolymers Material extrusion of plant biopolymers: Opportunities Chaunier et al. [72]
& challenges for 3D printing
Design methods A survey of design methods for material extrusion Huang et al. [73]
polymer 3D printing
Continuous fiber Material extrusion additive manufacturing of Zhuo et al. [5]
continuous fiber reinforced polymer matrix composites:
A review and outlook
Wood; lignocellulosic Material extrusion additive manufacturing of wood and Lamm et al. [74]
lignocellulosic filled composites
Process monitoring Process monitoring for material extrusion additive Oleff et al. [75]
manufacturing: a state-of-the-art review
Plant protein Plant protein in material extrusion 3D printing: Rowat et al. [76]
Formation, plasticization, prospects, and challenges
Directed energy Repair Application of directed energy deposition-based additive Saboori et al. [77]
deposition manufacturing in repair
In situ monitoring A review on in situ monitoring technology for directed Tang et al. [78]
energy deposition of metals
Slicing A review of slicing methods for directed energy Xu et al. [79]
deposition based additive manufacturing
Adaptive control Review on adaptive control of laser-directed energy Wang et al. [80]
deposition
High-quality Preventing evaporation products for high-quality metal Kim et al. [81]
film in directed energy deposition: A review
Process parameters; Ti Selective laser manufacturing of Ti-based alloys and Singh et al. [82]
composites: impact of process parameters, application
trends, and future prospects
Heat treatments; quality; A review of heat treatments on improving the quality Teixeira et al. [83]
residual stress and residual stresses of the Ti–6Al–4V parts produced
by additive manufacturing
Statistics from Scopus database; access date: October 19, 2022

AM, focusing on different materials. We have concluded lot of published review papers on these three materials.
and listed some of the typical review papers in different Note that not all review papers are listed in this table as
materials. For the category of materials in Table 4, ABS, there are too many papers published nowadays. However,
PLA, and PEEK are listed separately as these three types Tables 3 and 4 should be enough for readers to obtain the
of materials are widely used nowadays and there are a essential information.

Volume 1 Issue 4 (2022) 6 https://doi.org/10.18063/msam.v1i4.21