Page 76 - MSAM-1-4

Materials Science in Additive Manufacturing Survey of AM reviews

Table 3. Top cited review papers in different materials
Category First author Published year Article title No. of citations Reference
Metal Frazier 2014 Metal additive manufacturing: A review 3289 [84]
Sames et al. 2016 The metallurgy and processing science of metal additive 1320 [85]
manufacturing
Ceramics Deckers et al. 2014 Additive manufacturing of ceramics: A review 294 [86]
Sing et al. 2017 Direct selective laser sintering and melting of ceramics: 197 [87]
A review
Polymer Ligon et al. 2017 Polymers for 3D printing and customized additive 1626 [88]
manufacturing
Stainless steel Kong et al. 2021 About metastable cellular structure in additively 92 [89]
manufactured austenitic stainless steels
Jin et al. 2020 Wire arc additive manufacturing of stainless steels: A 83 [90]
review
Ni-based alloys Attallah et al. 2016 Additive manufacturing of Ni-based super alloys: The 130 [91]
outstanding issues
Ti-based alloys Shipley et al. 2018 Optimization of process parameters to address 273 [92]
fundamental challenges during selective laser melting of
Ti-6Al-4V: A review
Biomaterial Murphy and Atala 2014 3D bioprinting of tissues and organs 3847 [93]
Concrete Buswell et al. 2018 3D printing using concrete extrusion: A roadmap for 557 [94]
research
Fibre Parandoush and Lin 2017 A review on additive manufacturing of polymer-fiber 581 [95]
composites
Kabir et al. 2020 A critical review on 3D printed continuous 176 [4]
fiber-reinforced composites: History, mechanism,
materials and properties
Multi-material Bandyopadhyay and 2018 Additive manufacturing of multi-material structures 349 [96]
Heer
ABS Torrado Perez et al. 2014 Fracture surface analysis of 3D-printed tensile specimens 285 [97]
of novel ABS-based materials
PLA Ilyas et al. 2021 Polylactic acid (Pla) biocomposite: Processing, additive 73 [98]
manufacturing and advanced applications
PEEK Zanjanijam et al. 2020 Fused filament fabrication of peek: A review of 54 [99]
process-structure-property relationships
Aluminium Aboulkhair et al. 2019 3D printing of aluminum alloys: Additive Manufacturing 507 [100]
alloys of aluminum alloys using selective laser melting
Copper Tran et al. 2019 3D printing of highly pure copper 83 [101]
Food Godoi et al. 2016 3d printing technologies applied for food design: Status 424 [102]
and prospects
Smart Material Mendes-Felipe et al. 2019 State-of-the-art and future challenges of UV curable 128 [103]
polymer-based smart materials for printing technologies
Glass Zhang et al. 2021 3D printing of glass by additive manufacturing 16 [104]
techniques: a review
Wood Lamm et al. 2020 Material extrusion additive manufacturing of wood and 21 [74]
lignocellulosic filled composites
Statistics from Scopus database; access date: October 19, 2022
3.7. Review paper categories based on research area aerospace, tissue engineering, construction, drug delivery,
In this section, AM review papers that focus on key/hottest topology optimization, etc. The most cited review papers
areas (e.g., aerospace, tissue engineering) will be discussed. focused on these areas are provided in this subsection, as
Nowadays, AM is widely used in different fields, including shown in Table 5.

Volume 1 Issue 4 (2022) 7 https://doi.org/10.18063/msam.v1i4.21