Page 6 - MSAM-2-3
P. 6

Volume 2 ǀ Issue 3 ǀ September 2023 ǀ

                                                Materials Science in Additive Manufacturing


                                                                           https://accscience.com/journal/MSAM


           CONTENTS


            1       A review of advances in additive manufacturing and the integration of       REVIEW ARTICLE
                    high-performance polymers, alloys, and their composites
                    Yanting Liu, Swee Leong Sing

                    https://doi.org/10.36922/msam.1587

            2       Modeling and experimental investigation of fiber orientation in cast     ORIGINAL RESEARCH
                    and 3D-printed cementitious composites                                             ARTICLE
                    Mingyang Li, Dong Zhang, Teck Neng Wong, Ming Jen Tan, Yiwei Weng

                    https://doi.org/10.36922/msam.1603

            3       Fatigue behavior of additively manufactured Ti3Al2V alloy                ORIGINAL RESEARCH
                    Amit Bandyopadhyay, Sushant Ciliveri, Stefano Guariento, Nathan Zuckschwerdt, William W.   ARTICLE
                    Hogg

                    https://doi.org/10.36922/msam.1705

            4       Additive manufacturing of continuous carbon fiber-reinforced silicon     ORIGINAL RESEARCH
                    carbide composite by fused filament fabrication and precursor                      ARTICLE
                    infiltration pyrolysis
                    Xiang Nie, Siqi Wu, Lei Yang, Chunze Yan, Yusheng Shi

                    https://doi.org/10.36922/msam.1604

            5       Triply periodic minimal surfaces lattice structures: Functional graded   ORIGINAL RESEARCH
                    and hybrid designs for engineering applications                                    ARTICLE
                    Tian Lan, Chenxi Peng, Kate Fox, Truong Do, Phuong Tran

                    https://doi.org/10.36922/msam.1753

            6       Additive manufacturing: Application and validation of machine            ORIGINAL RESEARCH
                    learning-based process-structure-property linkages in Ti-6Al-4V                    ARTICLE
                    Xi Gong, Willem Groeneveld-Meijer, Guha Manogharan

                    https://doi.org/10.36922/msam.0999

            7       3D-printed triaxial nozzles fabricated by stereolithography to prevent   ORIGINAL RESEARCH
                    backflow in soft matter biofabrication                                             ARTICLE
                    Hamed I. Albalawi, Dana M. Alhattab, Aris P. Konstantinidis, Khadija B. Shirazi, Yousef
                    Altayeb, Charlotte A. E. Hauser

                    https://doi.org/10.36922/msam.1786

            8       Maraging steel powder alteration caused by laser powder bed fusion       ORIGINAL RESEARCH
                    printing process                                                                   ARTICLE
                    Othmane Rayan, Jean Brousseau, Claude Belzile, Abderrazak El Ouafi

                    https://doi.org/10.36922/msam.1781


                                                            iv
   1   2   3   4   5   6   7   8   9   10   11