Page 6 - MSAM-3-3

Volume 3 ǀ Issue 3 ǀ September 2024 ǀ

Materials Science in Additive Manufacturing

https://accscience.com/journal/msam

CONTENTS

ORIGINAL RESEARCH ARTICLES
1 Multi-material structures of Ti6Al4V and Ti6Al4V-B4C through directed energy deposition-
based additive manufacturing
Nathaniel W. Zuckschwerdt, Amit Bandyopadhyay
2 An experimental process parameter study on the identification of defects in additively
fabricated Al6061 with laser powder bed fusion
Faik Derya Ince, Sivaji Karna, Tianyu Zhang, Andrew J. Gross, Timothy Krentz, Dale Hitchcock, Lang Yuan, Tuğrul Özel
3 3D printing soft robots integrated with low-melting-point alloys
Liuchao Jin, Xiaoya Zhai, Kang Zhang, Jingchao Jiang, Wei-Hsin Liao
4 Material extrusion-based printing optimization of recycled HDPE filaments made from used
milk jugs
Soek Po Phillis Teng, Chor Hiong Tee, Hwee Boon Tan, Kah Fai Leong
5 The effect of thermal rest time during in situ alloying of Ti41Nb through laser powder bed
fusion
Y Guo Ren Chou, Sheng Huang, Swee Leong Sing
6 Design criteria and energy absorption prediction empirical rule for deformation-induced
densification of gradient porous materials
Yi Chao, Che-Nan Kuo
7 Wide-angle broadband metamaterial absorber with carbon black-carbonyl iron/polylactic
acid composites fabricated by fused filament fabrication
Fei Wang, Qianfeng Zhou, Hongsheng Liu, Pengfei Fang, Kaiyong Jiang, Peifeng Li

CORRECTION
8 Correction

iv