Page 56 - MSAM-3-4

Materials Science in Additive Manufacturing Directed energy deposition

coating on ductile iron surface by high-speed laser cladding. 13. Zhu Y, Zou J, Chen X, et al. Tribology of selective laser
Mater Today Commun. 2024;39:108638. melting processed parts: Stainless steel 316 L under
lubricated conditions. Wear. 2016;350-351:46-55.
doi: 10.1016/j.mtcomm.2024.108638
doi: 10.1016/j.wear.2016.01.004
3. Luo X, Smith G, Sampath S. On the interplay between
adhesion strength and tensile properties of thermal spray 14. Liang Y, Liao Z, Zhang L, et al. A review on coatings deposited
coated laminates-part I: High velocity thermal spray by extreme high-speed laser cladding: processes, materials,
coatings. J Therm Spray Tech. 2018;27:296-307. and properties. Opt Laser Technol. 2023;164:109472.
doi: 10.1007/s11666-018-0695-1 doi: 10.1016/j.optlastec.2023.109472
4. Li M, Li C, Li B, et al. Comparison of Fe Co Cr Ni Mo 15. Yang J, Bai B, Ke H, et al. Effect of metallurgical behavior
20
20
3.5
20
30
high entropy alloy coatings prepared using plasma cladding. on microstructure and properties of FeCrMoMn coatings
High-speed laser cladding, and deep laser cladding. prepared by high-speed laser cladding. Opt Laser Technol.
Coatings. 2023;13:1819. 2021;144:107431.
doi: 10.3390/coatings13111819 doi: 10.1016/j.optlastec.2021.107431
5. Doll G, Mensah B, Mohseni H, et al. Chemical vapor 16. Tuominen J, Kiviö J, Balusson C, et al. High-speed laser
deposition and atomic layer deposition of coatings for cladding of chromium carbide reinforced Ni-based coatings.
mechanical applications. J Therm Spray Tech. 2009;19: Weld World. 2023;67:2175-2186.
510-516. doi: 10.1007/s40194-023-01557-9
doi: 10.1007/s11666-009-9364-8 17. Yuan W, Li R, Chen Z, et al. A comparative study on
6. Liu G, Su Y, Pi S, et al. Achieving high strength 316L stainless microstructure and properties of traditional laser cladding
steel by laser directed energy deposition-ultrasonic rolling and high-speed laser cladding of Ni45 alloy coatings. Surf
hybrid process. Mat Sci Eng A Struct. 2024;903:146665. Coat Tech. 2021;405:126582.

doi: 10.1016/j.msea.2024.146665 doi: 10.1016/j.surfcoat.2020.126582
7. Aggarwal A, Pandiyan V, Leinenbach C, et al. Investigating 18. Zhang Z, Yang Q, Yu Z, et al. Influence of Y2O3 addition
laser beam shadowing and powder particle dynamics in on the microstructure of TiC reinforced Ti-based composite
directed energy deposition through high-fidelity modelling coating prepared by laser cladding. Mater Charact.
and high-speed imaging. Addit Manuf. 2024;91:104344. 2022;189:111962.
doi: 10.1016/j.addma.2024.104344 doi: 10.1016/j.matchar.2022.111962
8. Sun Z, Tan X, Tor S, et al. Selective laser melting of stainless 19. Liu H, Qin X, Huang S, et al. Geometry characteristics
steel 316L with low porosity and high build rates. Mater Des. prediction of single track cladding deposited by high power
2016;104:197-204. diode laser based on genetic algorithm and neural network.
Int J Precis Eng Man. 2018;19:1061-1070.
doi: 10.1016/j.matdes.2016.05.035
20. Liu H, Qin X, Huang S, et al. Geometry modeling of single
9. Antony K, Arivazhagan N, Senthilkumaran K. Numerical track cladding deposited by high power diode laser with
and experimental investigations on laser melting of stainless rectangular beam spot. Opt Laser Eng. 2018;100:38-46.
steel 316L metal powders. J Manuf Process. 2014;16:345-355.
doi: 10.1016/j.optlaseng.2017.07.008
doi: 10.1016/j.jmapro.2014.04.001
21. Sun B, Cheng J, Cai Z, et al. Formation and wear property
10. Buford A, Goswami T. Review of wear mechanisms in hip of broad-beam laser clad Fe-based coatings. Surf Coat Tech.
implants: Paper I-general. Mater Des. 2004;25:385-393. 2021;405:126598.
doi: 10.1016/j.matdes.2003.11.010 doi: 10.1016/j.surfcoat.2020.126598
11. Mahathanabodee S, Palathai T, Raadnui S, et al. Dry sliding 22. Lei K, Qin X, Liu H, et al. Analysis and modeling of melt
wear behavior of SS316L composites containing h-BN and pool morphology for high power diode laser cladding with a
MoS2 solid lubricants. Wear. 2014;316:37-48. rectangle beam spot. Opt Laser Eng. 2018;110:89-99.
doi: 10.1016/j.wear.2014.04.015 doi: 10.1016/j.optlaseng.2018.05.022
12. Zeng Y, Li K, Hughes R, et al. Corrosion mechanisms 23. Wang R, Ouyang C, Zhao C, et al. Effect of high-temperature
and materials selection for the construction of flue gas heat treatment on electrochemical corrosion behavior of
component in advanced heat and power systems. Ind Eng laser cladding Fe-based alloy coating in H2SO4 solution.
Chem Res. 2017;56:14141-14154. Mater Lett. 2023;346:134560.
doi: 10.1021/acs.iecr.7b03664 doi: 10.1016/j.matlet.2023.134560

Volume 3 Issue 4 (2024) 11 doi: 10.36922/msam.4974