Page 22 - MSAM-4-1

Materials Science in Additive Manufacturing Natural composite filaments for 3D-Print

doi: 10.3390/ma12030499 A review. J Manuf Process. 2021;66:228-237.
12. Chen BC, Zou M, Liu GM, Song JF, Wang HX. Experimental doi: 10.1016/j.jmapro.2021.04.018
study on energy absorption of bionic tubes inspired by 23. Lvov VA, Senatov FS, Stepashkin AA, Veveris AA,
bamboo structures under axial crushing. Int J Impact Eng. Pavlov MD, Komissarov AA. Low-cycle fatigue behavior
2018;115:48-57. of 3D-printed metallic auxetic structure. Mater Today Proc.
doi: 10.1016/j.ijimpeng.2018.01.005 2020;33:1979-1983.
13. Zhang T, Wang A, Wang Q, Guan F. Bending characteristics doi: 10.1016/j.matpr.2020.06.130
analysis and lightweight design of a bionic beam inspired by 24. Shahrubudin N, Lee TC, Ramlan R. An overview on
bamboo structures. Thin Walled Struct. 2019;142:476-498. 3D printing technology: Technological, materials, and
doi: 10.1016/j.tws.2019.04.043 applications. Procedia Manuf. 2019;35:1286-1296.
14. Jiang H, Ziegler H, Zhang Z, Meng H, Chronopoulos D, doi: 10.1016/j.promfg.2019.06.089
Chen Y. Mechanical properties of 3D printed architected 25. Caminero M, Chacón J, García-Plaza E, Núñez P, Reverte J,
polymer foams under large deformation. Mater Des. Becar J. Additive manufacturing of PLA-based composites
2020;194:108946. using fused filament fabrication: Effect of graphene nanoplatelet
doi: 10.1016/j.matdes.2020.108946 reinforcement on mechanical properties, dimensional
accuracy and texture. Polymers (Basel). 2019;11(5):799.
15. Xu Y, Zhang H, Šavija B, Chaves Figueiredo S, Schlangen E.
Deformation and fracture of 3D printed disordered lattice doi: 10.3390/polym11050799
materials: Experiments and modeling. Mater Des. 26. Cicala G, Giordano D, Tosto C, Filippone G, Recca A,
2019;162:143-153. Blanco I. Polylactide (PLA) filaments a biobased solution
doi: 10.1016/j.matdes.2018.11.047 for additive manufacturing: Correlating rheology and
thermomechanical properties with printing quality.
16. Chen Y, Li T, Jia Z, Scarpa F, Yao CW, Wang L. 3D printed Materials (Basel). 2018;11(7):1191.
hierarchical honeycombs with shape integrity under large
compressive deformations. Mater Des. 2018;137:226-234. doi: 10.3390/ma11071191
doi: 10.1016/j.matdes.2017.10.028 27. Camargo JC, Machado ÁR, Almeida EC, Silva EFMS.
Mechanical properties of PLA-graphene filament for FDM 3D
17. Martens P, Mathot M, Bos F, Coenders J. Optimising 3D printing. Int J Adv Manuf Technol. 2019;103(5-8):2423-2443.
printed concrete structures using topology optimisation.
In: High Tech Concrete: Where Technology and Engineering doi: 10.1007/s00170-019-03532-5
Meet. Berlin, Germany: Springer International Publishing; 28. Novaković D, Kašiković N, Vladić G, Pál M. Screen printing.
2018. p. 301-309. In: Printing on Polymers. Amsterdam, Netherlands: Elsevier;
doi: 10.1007/978-3-319-59471-2_37 2016. p. 247-261.
18. Chen Y, Veer F, Çopuroğlu O. A critical review of 3D doi: 10.1016/B978-0-323-37468-2.00015-4
concrete printing as a low Co concrete approach. Heron. 29. Srivatsan TS, Sudarshan TS, editors. Additive Manufacturing:
2
2017;62:167-194. Innovations, Advances, and Applications. United States: CRC
19. Wolfs RJM, Bos FP, Salet TAM. Hardened properties of 3D Press; 2015.
printed concrete: The influence of process parameters on doi: 10.1201/b19360
interlayer adhesion. Cem Concr Res. 2019;119:132-140.
30. Wojtyła S, Klama P, Baran T. Is 3D printing safe? Analysis
doi: 10.1016/j.cemconres.2019.02.017 of the thermal treatment of thermoplastics: ABS, PLA, PET,
20. Nerella VN, Hempel S, Mechtcherine V. Effects of layer- and nylon. J Occup Environ Hyg. 2017;14(6):D80-D85.
interface properties on mechanical performance of concrete doi: 10.1080/15459624.2017.1285489
elements produced by extrusion-based 3D-printing. Constr
Build Mater. 2019;205:586-601. 31. El Magri A, Ouassil S, Vaudreuil S. Effects of printing
parameters on the tensile behavior of 3D-printed
doi: 10.1016/j.conbuildmat.2019.01.235 Acrylonitrile Styrene Acrylate (ASA) material in Z direction.
21. Heras Murcia D, Genedy M, Reda Taha MM. Examining the Polym Eng Sci. 2022;62(3):848-860.
significance of infill printing pattern on the anisotropy of 3D doi: 10.1002/pen.25891
printed concrete. Constr Build Mater. 2020;262:120559.
32. Harris CG, Jursik NJS, Rochefort WE, Walker TW. Additive
doi: 10.1016/j.conbuildmat.2020.120559 manufacturing with soft TPU - adhesion strength in
multimaterial flexible joints. Front Mech Eng. 2019;5:37.
22. Nurhudan AI, Supriadi S, Whulanza Y, Saragih AS. Additive
manufacturing of metallic based on extrusion process: doi: 10.3389/fmech.2019.00037

Volume 4 Issue 1 (2025) 16 doi: 10.36922/msam.8533