Page 107 - MSAM-4-3

Materials Science in Additive Manufacturing Heterostructures of A131 steel by DED

International Publishing; 2022. p. 71-93. 18. Wang J, Zhang M, Wang B, et al. Influence of surface
porosity on fatigue life of additively manufactured ASTM
8. Materials ASfTa. ASTM A131/A 131M-04. Standard
Specification for Structural Steel for Ships. Commonwealth of A131 EH36 steel. Int J Fatigue. 2021;142:105894.
Pennsylvania: ASTM International; 2004. doi: 10.1016/j.ijfatigue.2020.105894
9. Sirisatien T, Mahabunphachai S, Sojiphan K. Effect of 19. Liu L, Li S, Pan D, et al. Loss-free tensile ductility of
submerged arc welding process with one-side one-pass dual-structure titanium composites via an interdiffusion
welding technique on distortion behavior of shipbuilding and self-organization strategy. Proc Natl Acad Sci U S A.
steel plate ASTM A131 grade A. Mater Today Proc. 2018;5(3, 2023;120(28):e2302234120.
Part 2):9543-9551.
doi: 10.1073/pnas.2302234120
doi: 10.1016/j.matpr.2017.10.136
20. Gao S, Li Z, Van Petegem S, et al. Additive manufacturing
10. Yan Q, Chen B, Kang N, et al. Comparison study on of alloys with programmable microstructure and properties.
microstructure and mechanical properties of Ti-6Al-4V Nat Commun. 2023;14(1):6752.
alloys fabricated by powder-based selective-laser-melting
and sintering methods. Mater Charact. 2020;164:110358. doi: 10.1038/s41467-023-42326-y
21. Tan C, Li R, Su J, et al. Review on field assisted metal additive
doi: 10.1016/j.matchar.2020.110358
manufacturing. Int J Mach Tools Manuf. 2023;189:104032.
11. Yan Q, Chen B, Jia Z, et al. Formation of dual quasi-
continuous networked structure and its strengthening effect doi: 10.1016/j.ijmachtools.2023.104032
in Ti-6Al-4V alloy reinforced with graphene via powder bed 22. Svetlizky D, Das M, Zheng B, et al. Directed energy
fusion. Add Manuf. 2024;92:104364. deposition (DED) additive manufacturing: Physical
doi: 10.1016/j.addma.2024.104364 characteristics, defects, challenges and applications. Mater
Today. 2021;49:271-295.
12. Bai Y, Yan Y, Chen J, Liang C, Bi G, Zhao C. Microstructure
and mechanical property evolution of 316L/18Ni300 doi: 10.1016/j.mattod.2021.03.020
bimetallic structure manufactured by laser powder bed 23. Kong H, Yibo L, Fuxiang L, et al. In situ fabrication
fusion. Mater Sci Eng A. 2025;929:148141. of martensitic stainless steel via heterogeneous
doi: 10.1016/j.msea.2025.148141 double-wire arc-directed energy deposition. Virt Phys
Prototyp. 2024;19(1):e2350610.
13. Ang LJJ, Huang J, Nai MLS, Wang P. Additive manufacturing
techniques for EH36 steels: Challenges and future directions. doi: 10.1080/17452759.2024.2350610
ESAM. 2025;1(1):025060005. 24. Myers MB, Bandyopadhyay A. Understanding the
doi: 10.36922/esam025060005 antibacterial efficacy of additively manufactured copper-
added 316L stainless steel. MSAM. 2025;4(1):7357.
14. Wenjin W, Beng TS, Kai CC, et al. Preliminary investigation
on SLM of ASTM A131 EH36 high tensile strength steel for doi: 10.36922/msam.7357
shipbuilding applications. Proceedings of the 2 International 25. Zuckschwerdt NW, Bandyopadhyay A. Multi-material
nd
Conference on Progress in Additive Manufacturing; 2014. structures of Ti6Al4V and Ti6Al4V-B4C through directed
doi: 10.3850/978-981-09-0446-3_083 energy deposition-based additive manufacturing. MSAM.
2024;3(3):3571.
15. Wu W, Tor SB, Merchant AA. Tensile properties of ASTM
A131 EH36 shipbuilding steel processed by selective laser doi: 10.36922/msam.3571
rd
melting. Proceedings of the 3 International Conference on 26. Su J, Li Q, Teng J, et al. Programmable mechanical properties
Progress in Additive Manufacturing; 2018. of additively manufactured novel steel. Int J Extreme Manuf.
16. Wang J, Wu WJ, Jing W, et al. Improvement of densification 2025;7(1):015001.
and microstructure of ASTM A131 EH36 steel samples doi: 10.1088/2631-7990/ad88bc
additively manufactured via selective laser melting with
varying laser scanning speed and hatch spacing. Mater Sci 27. Dan X, Ren C, Song Z, et al. Exceptional strength and ductility
Eng A. 2019;746:300-313. in heterogeneous multi-gradient TiAl alloys through
additive manufacturing. Acta Mater. 2024;281:120395.
doi: 10.1016/j.msea.2019.01.019
doi: 10.1016/j.actamat.2024.120395
17. Wang J, Chew YX, Wu WJ, et al. Microstructure and
mechanical properties of ASTM A131 EH36 steel fabricated 28. Wu X, Yang M, Yuan F, et al. Heterogeneous lamella structure
by laser aided additive manufacturing. Mater Charact. unites ultrafine-grain strength with coarse-grain ductility.
2021;174:110949. Proc Natl Acad Sci U S A. 2015;112(47):14501-14505.
doi: 10.1016/j.matchar.2021.110949 doi: 10.1073/pnas.1517193112

Volume 4 Issue 3 (2025) 14 doi: 10.36922/MSAM025220038