Page 46 - ESAM-1-1

Engineering Science in
Additive Manufacturing Gen-AI for lattice structure design

Funding elements alloying. Composit Part B Eng. 2023;249:110399.

This work is fully supported by the Advanced Research and doi: 10.1016/j.compositesb.2022.110399
Technology Innovation Centre, the National University 5. Su J, Li Q, Teng J, et al. Programmable mechanical properties
of Singapore under Grant (project number: ADT-RP1). of additively manufactured novel steel. Int J Extreme Manuf.
Yang Mo acknowledges the sponsorship of the China 2024;7(1):ad88bc.
Scholarship Council (No. 202306130143). doi: 10.1088/2631-7990/ad88bc
Conflict of interest 6. Liu M, Lei C, Wang Y, Zhang B, Qu X. High‐throughput
preparation for alloy composition design in additive
Dr. Swee Leong Sing is the Editor-in-Chief of this journal, manufacturing: A comprehensive review. Mater Genom Eng
but was not in any way involved in the editorial and Adv. 2024;2(3):e55.
peer-review process conducted for this paper, directly or doi: 10.1002/mgea.55
indirectly. Separately, other authors declared that they
have no known competing financial interests or personal 7. Tan C, Li R, Su J, et al. Review on field assisted metal additive
relationships that could have influenced the work reported manufacturing. Int J Mach Tools Manuf. 2023;189:10403.
in this paper. doi: 10.1016/j.ijmachtools.2023.104032
Author contributions 8. Luo JP, Huang YJ, Xu JY, et al. Additively manufactured
biomedical Ti-Nb-Ta-Zr lattices with tunable Young’s
Conceptualization: Jinlong Su, Swee Leong Sing modulus: Mechanical property, biocompatibility, and
Funding acquisition: Swee Leong Sing proteomics analysis. Mater Sci Eng C. 2020;114:110903.
Supervision: Swee Leong Sing doi: 10.1016/j.msec.2020.110903
Visualization: Jinlong Su, Yang Mo 9. Sing SL. Perspectives on additive manufacturing enabled
Writing – original draft: Jinlong Su, Yang Mo beta-titanium alloys for biomedical applications. Int J
Writing – review & editing: Swee Leong Sing Bioprint. 2021;8(1):478.

Ethics approval and consent to participate doi: 10.18063/ijb.v8i1.478
Not applicable. 10. Liu YJ, Zhang JS, Liu XC, et al. Non-layer-wise fracture
and deformation mechanism in beta titanium cubic lattice
Consent for publication structure manufactured by selective laser melting. Mater Sci
Eng A. 2021;822:141696.
Not applicable.
doi: 10.1016/j.msea.2021.141696
Availability of data 11. Li Z, Luo Z, Zhang LC, Wang CH. Topological design of
As this is a review article, no primary research results, data, pentamode lattice metamaterials using a ground structure
software, or code have been included. method. Mater Des. 2021;202:109523.
doi: 10.1016/j.matdes.2021.109523
References
12. Su JL, Jiang FL, Teng J, et al. Laser additive manufacturing
1. Pan C, Han Y, Lu J. Design and optimization of lattice of titanium alloys: Process, materials and post-processing.
structures: A review. Appl Sci. 2020;10(18):6374. Rare Metals. 2024;43(12):6288-6328.
doi: 10.3390/app10186374 doi: 10.1007/s12598-024-02685-x
2. Chen LY, Liang SX, Liu Y, Zhang LC. Additive manufacturing 13. Nagesha BK, Dhinakaran V, Varsha Shree M, Manoj Kumar
of metallic lattice structures: Unconstrained design, accurate KP, Chalawadi D, Sathish T. Review on characterization and
fabrication, fascinated performances, and challenges. Mater impacts of the lattice structure in additive manufacturing.
Sci Eng R Rep. 2021;146:100648. Mater Today Proc. 2020;21:916-919.
doi: 10.1016/j.mser.2021.100648 doi: 10.1016/j.matpr.2019.08.158
3. Su J, Jiang F, Teng J, et al. Recent innovations in laser additive 14. Wang Y, Zhang L, Daynes S, Zhang H, Feih S, Wang MY.
manufacturing of titanium alloys. Int J Extreme Manuf. Design of graded lattice structure with optimized
2024;6(3):ad2545. mesostructures for additive manufacturing. Mater Des.
2018;142:114-123.
doi: 10.1088/2631-7990/ad2545
doi: 10.1016/j.matdes.2018.01.011
4. Su J, Jiang F, Tan C, et al. Additive manufacturing of fine-
grained high-strength titanium alloy via multi-eutectoid 15. Hussein A, Hao L, Yan C, Everson R, Young P. Advanced

Volume 1 Issue 1 (2025) 11 doi: 10.36922/ESAM025110006