Page 361 - IJB-10-1

International Journal of Bioprinting Corrosion behavior of SLM-prepared 316L steel

properties of 316 L stainless steel manufactured via powder 28. Majumdar JD, Kumar A, Pityana S, Manna I. Laser surface
bed fusion. Addit Manuf. 2022;59(A):103128. melting of AISI 316L stainless steel for bio-implant
doi: 10.1016/j.addma.2022.103128 application. Proc Natl Acad Sci: Phys Sci. 2018;88:387-403.
doi: 10.1007/s40010-018-0524-4
17. Kunčická L, Kocich R, Benč M, Dvořák J. Affecting
microstructure and properties of additively manufactured 29. Saboori A, Aversa A, Marchese G, Biamino S, Lombardi
AISI 316L steel by rotary swaging. Materials. 2022;15(18):6291. M, Fino P. Microstructure and mechanical properties of
doi: 10.3390/ma15186291 AISI 316L produced by directed energy deposition-based
18. Han W, Fang F. Eco-friendly NaCl-based electrolyte for additive manufacturing: A review. Appl Sci. 2020;10(9):3310.
electropolishing 316L stainless steel. J Manuf Process. doi: 10.3390/app10093310
2020;58:1257-1269. 30. Guo P, Zou B, Huang C, Gao H. Study on microstructure,
19. Lee SK, Yun S-H, Joo HG, Noh SJ. Deuterium transport and mechanical properties and machinability of efficiently
isotope effects in type 316L stainless steel at high temperatures additive manufactured AISI 316L stainless steel by high-
for nuclear fusion and nuclear hydrogen technology power direct laser deposition. J Mater Process Technol.
applications. Curr Appl Phys. 2014;14(10):1385-1388. 2017;240:12-22.
doi: 10.1016/j.cap.2014.08.006 doi: 10.1016/j.jmatprotec.2016.09.005
20. Lin K, Qiao J, Gu D, et al. Active screen plasma nitriding 31. Yin H, Song M, Deng P, Li L, Prorok BC, Lou X. Thermal
of laser powder bed fusion processed 316L stainless steel stability and microstructural evolution of additively
for the application of fuel cell bipolar plates. Virtual Phys manufactured 316L stainless steel by laser powder bed
Prototyp. 2023;18(1):e2225490. fusion at 500-800 ℃. Addit Manuf. 2021;41:101981.
doi: 10.1080/17452759.2023.2225490 doi: 10.1016/j.addma.2021.101981
21. Romanovski V, Frantskevich V, Kazlouski V, et al. 32. Blinn B, Klein M, Gläßner C, Smaga M, Aurich JC, Beck
Inappropriate cleaning treatments of stainless steel AISI T. An investigation of the microstructure and fatigue
316L caused a corrosion failure of a liquid transporter truck. behavior of additively manufactured AISI 316L stainless
Eng Fail Anal. 2020;117:104938. steel with regard to the influence of heat treatment. Metals.
doi: 10.1016/j.engfailanal.2020.104938 2018;8(4):220.
doi: 10.3390/met8040220
22. Brooks EK, Brooks RP, Ehrensberger MT. Effects of
simulated inflammation on the corrosion of 316L stainless 33. Zanichelli A, Ronchei C, Scorza D, Vantadori S. Fatigue lifetime
steel. Mater Sci Eng C. 2017;71:200-205. of both plain and notched specimens made of additively
doi: 10.1016/j.msec.2016.10.012 manufactured AISI 316L. J Mater Res Technol. 2022;21:
2532-2546.
23. Kunčická L, Kocich R, Lowe TC. Advances in metals and doi: 10.1016/j.jmrt.2022.10.068
alloys for joint replacement. Prog Mater Sci. 2017;88:232-
280. 34. Abroug F, Monnier A, Arnaud L, Balcaen Y, Dalverny O.
doi: 10.1016/j.pmatsci.2017.04.002 High cycle fatigue strength of additively manufactured AISI
316L stainless steel parts joined by laser welding. Eng Fract
24. Kong D, Ni X, Dong C, et al. Heat treatment effect on the Mech. 2022;275:108865.
microstructure and corrosion behavior of 316L stainless doi: 10.1016/j.engfracmech.2022.108865
steel fabricated by selective laser melting for proton exchange
membrane fuel cells. Electrochim Acta. 2018;276:293-303. 35. Avanzini A. Fatigue behavior of additively manufactured
doi: 10.1016/j.electacta.2018.04.188 stainless steel 316L. Materials. 2022;16(1):65.
doi: 10.3390/ma16010065
25. Kocich R, Kunčická L, Macháčková A. Twist channel multi-
angular pressing (TCMAP ) as a method for increasing 36. Werner T, Madia M, Zerbst U. Comparison of the fatigue
the efficiency of SPD. IOP Conf Ser Mater Sci Eng. behavior of wrought and additively manufactured AISI
2014;63:012006. 316L. Procedia Struct Integr. 2022;38:554-563.
doi: 10.1088/1757-899X/63/1/012006 doi: 10.1016/j.prostr.2022.03.056
26. Jamili AM, Zarei-Hanzaki A, Abedi HR, Mosayebi M, 37. Machno M, Franczyk E, Bogucki R, Matras A, Zębala W.
Kocich R, Kunčická L. Development of fresh and fully Comparative study on the structure and quality of SLM and
recrystallized microstructures through friction stir cast AISI 316L samples subjected to WEDM processing.
processing of a rare earth bearing magnesium alloy. Mater Materials. 2022;15(3):701.
Sci Eng A. 2019;775:138837. doi: 10.3390/ma15030701
doi: 10.1016/j.msea.2019.138837
38. Polishetty A, Nomani J, Littlefair G. Evaluating and
27. Hemmasian Ettefagh A, Guo S, Raush J. Corrosion comparing secondary machining characteristics of wrought
performance of additively manufactured stainless steel and additive manufactured 316L stainless steel. Mater Today
parts: A review. Addit Manuf. 2021;37:101689. Proc, 2023;[online].
doi: 10.1016/j.addma.2020.101689 doi: 10.1016/j.matpr.2023.05.404

Volume 10 Issue 1 (2024) 353 https://doi.org/10.36922/ijb.1416