Page 362 - IJB-10-1

International Journal of Bioprinting Corrosion behavior of SLM-prepared 316L steel

39. Vinoth V, Sathiyamurthy S, Natarajan U, Venkatkumar D, 50. Oyane A, Onuma K, Ito A, Kim H-M, Kokubo T, Nakamura
Prabhakaran J, Prakash KS. Examination of microstructure T. Formation and growth of clusters in conventional and
properties of AISI 316L stainless steel fabricated by wire arc new kinds of simulated body fluids. J Biomed Mater Res.
additive manufacturing. Mater Today Proc. 2022;66(7):702-706. 2003;64(2):339-348.
doi: 10.1016/j.matpr.2022.04.011 doi: 10.1002/jbm.a.10426
40. Zach L, Kunčická L, Růžička P, Kocich R. Design, analysis 51. Oyane A, Kim H-M, Furuya T, Kokubo T, Miyazaki T,
and verification of a knee joint oncological prosthesis finite Nakamura T. Preparation and assessment of revised
element model. Comput Biol Med. 2014;54:53-60. simulated body fluids. J Biomed Mater Res. 2003;65(2):
doi: 10.1016/j.compbiomed.2014.08.021 188-195.
doi: 10.1002/jbm.a.10482
41. Pardo A, Merino MC, Coy AE, Viejo F. Pitting corrosion
behaviour of austenitic stainless steels – combining effects of 52. Oyane A, Onuma K, Ito A, et al. Variation of clusters in
Mn and Mo additions. Corros Sci. 2008;50(6):1796-1806. simulated body fluids with time. Key Eng Mater. 2001;
doi: 10.1016/j.corsci.2008.04.005 218-220:629-632.
doi: 10.4028/www.scientific.net/KEM.218-220.629
42. Shih C-C, Shih C-M, Su Y-Y, Julie Su LH, Chang M-S, Lin
S-J. Effect of surface oxide properties on corrosion resistance 53. Kořínek M, Halama R, Fojtík F, et al. Monotonic tension-
of 316L stainless steel for biomedical applications. Corros torsion experiments and FE modeling on notched specimens
Sci. 2004;46(2):427-441. produced by SLM technology from SS316L. Materials.
doi: 10.1016/S0010-938X(03)00148-3 2020;14(1):33.
doi: 10.3390/MA14010033
43. Shahryari A, Omanovic S, Szpunar JA. Electrochemical
formation of highly pitting resistant passive films on a 54. Pitassi D, Savoia E, Fontanari V, et al. Finite element thermal
biomedical grade 316LVM stainless steel surface. Mater Sci analysis of metal parts additively manufactured via selective
Eng C. 2008;28(1):94-106. laser melting. In: Finite Element Method - Simulation,
doi: 10.1016/j.msec.2007.09.002 Numerical Analysis and Solution Techniques. 2018.
doi: 10.5772/intechopen.71876
44. Tekdir H, Yetim T, Yetim AF. Corrosion properties of
ceramic-based TiO2 films on plasma oxidized Ti6Al4V/316L 55. Jin M, Piglione A, Dovgyy B, et al. Cyclic plasticity and
layered implant structured manufactured by selective laser fatigue damage of CrMnFeCoNi high entropy alloy
melting. J Bionic Eng 2021;18:944-957. fabricated by laser powder-bed fusion. Addit Manuf. 2020;36:
101584.
45. Yetim T, Tekdir H, Taftalı M, Turalıoğlu K, Yetim AF. doi: 10.48550/arXiv.2007.07043
Synthesis and characterisation of single and duplex ZnO/
TiO 2 ceramic films on additively manufactured bimetallic 56. Dovgyy B, Piglione A, Hooper PA, Pham M-S. Comprehensive
material of 316L stainless steel and Ti6Al4V. Surf Topogr assessment of the printability of CoNiCrFeMn in laser
Metrol Prop. 2023;11(2):024005. powder bed fusion. Mater Des. 2020;194:108845.
doi: 10.1088/2051-672X/accf6c doi: 10.1016/j.matdes.2020.108845
46. Fredriksson W, Petrini D, Edström K, Björefors F, Nyholm 57. Elangeswaran C, Cutolo A, Muralidharan GK, et al. Effect of
L. Corrosion resistances and passivation of powder post-treatments on the fatigue behaviour of 316L stainless
metallurgical and conventionally cast 316L and 2205 steel manufactured by laser powder bed fusion. Int J Fatigue.
stainless steels. Corros Sci. 2013;67:268-280. 2019;123:31-39.
doi: 10.1016/j.corsci.2012.10.021 doi: 10.1016/j.ijfatigue.2019.01.013
47. Geenen K, Röttger A, Theisen W. Corrosion behavior 58. Salman OO, Gammer C, Chaubey AK, Eckert J, Scudino S.
of 316L austenitic steel processed by selective laser Effect of heat treatment on microstructure and mechanical
melting, hot-isostatic pressing, and casting. Mater Corros. properties of 316L steel synthesized by selective laser
2017;68(7):764-775. melting. Mater Sci Eng A. 2019;748:205-212.
doi: 10.1002/maco.201609210 doi: 10.1016/j.msea.2019.01.110
48. Hardes C, Pöhl F, Röttger A, Thiele M, Theisen W, Esen 59. Kunčická L, Macháčková A, Krátká L, Kocich R. Analysis of
C. Cavitation erosion resistance of 316L austenitic steel deformation behaviour and residual stress in rotary swaged
processed by selective laser melting (SLM). Addit Manuf. Cu/Al clad composite wires. Materials. 2019;12(21):3462.
2019;29:100786. doi 10.3390/ma12213462
doi: 10.1016/j.addma.2019.100786 60. Zhang Q, Jin K, Mu D. Tube/tube joining technology by
using rotary swaging forming method. J Mater Process
49. Canelo-Yubero D, Kocich R, Hervoches C, Strunz P, Kunčická
L, Kratka L. Neutron diffraction study of residual stresses in a Technol. 2014;214:2085-2094.
W–Ni–Co heavy alloy processed by rotary swaging at room and doi: 10.1016/j.jmatprotec.2014.02.002
high temperatures. Met Mater Int. 2022;28(4):919-930. 61. Strunz P, Kunčická L, Beran P, Kocich R, Hervoches C.
doi: 10.1007/s12540-020-00963-8 Correlating microstrain and activated slip systems with

Volume 10 Issue 1 (2024) 354 https://doi.org/10.36922/ijb.1416