Page 18 - IJB-10-6

International Journal of Bioprinting 3D-bioprinted multicellular lung organoids

Figure 4. Researches for the production of 3D lung models. (A) Schematic overview of the study showing the development of a lab-on-chip (LOC) platform
using six hydrogel inks Adapted from Krakos et al. (B) Protocol for the toxicological study of silver nanoparticles (AgNPs) using organoid-based scaffold
98
99
Adapted from Gerboles et al. (C) Method for hydrogel-in-hydrogel live bioprinting using two-photon (2P) bioprinting Adapted from Urciuolo et al.
100
(D) Schematic of fabrication of vascularized lung cancer organoids (LCO) models including lung tissue-specific extracellular matrix (ECM) components
and LCOs, stroma cells, and blood vessel. Copyright © 2023 IOP Publishing. Reproduced with permission of IOP Publishing, Ltd. All rights reserved.
101
Volume 10 Issue 6 (2024) 10 doi: 10.36922/ijb.4092