Page 56 - IJB-9-2

International Journal of Bioprinting Biocompatible materials and Multi Jet Fusion

Author contributions 6. Park JH, Yoon JK, Shin YM, et al., 2019, Experimental
tracheal replacement using 3-dimensional bioprinted
Conceptualization: Misun Cha artificial trachea with autologous epithelial cells and
Data curation: Su Hee Kim chondrocytes. Sci Rep, 9(1): 2103.
Formal analysis: Bin Xu, Sang Jin An 7. Temple JP, Hutton DL, Hung BP, et al., 2014, Engineering
Funding acquisition: Su Hee Kim, Misun Cha anatomically shaped vascularized bone grafts with hASCs
Investigation: Se Jun Park and 3D printed PCL scaffolds. J Biomed Mater Res A,
Methodology: Su Hee Kim 102(12): 4317–4325.
Project administration: Su Hee Kim, Misun Cha
Resources: Se Jun Park 8. Marchment T, Sanjayan J, Xia M, 2019, Method of enhancing
interlayer bond strength in construction scale 3D printing
Software: Se Jun Park with mortar by effective bond area amplification. Mater
Supervision: Su Hee Kim Design, 169: 107684.
Validation: Su Hee Kim, Jae Hyup Lee
Visualization: Su Hee Kim 9. Xia M, Sanjayan J, 2016, Method of formulating geopolymer
Writing – original draft: Su Hee Kim for 3D printing for construction applications. Mater Design,
110: 382–390.
Writing – review & editing: Misun Cha
All authors have read and agreed to the published version 10. Zareiyan B, Khoshnevis B, 2017, Interlayer adhesion and
of the manuscript. strength of structures in contour crafting—Effects of
aggregate size, extrusion rate, and layer thickness. Autom
Ethics approval and consent to participate Constr, 81: 112–121.
11. Olubamiji AD, Izadifar Z, Si JL, et al., 2016, Modulating
All animals (Sprague Dawley rats, male, 7 weeks, 200–300 mechanical behaviour of 3D-printed cartilage-mimetic PCL
g) were cared for according to methods approved by the scaffolds: Influence of molecular weight and pore geometry.
Institutional Animal Care and Use Committee (IACUC Biofabrication, 8(2): 025020.
No. 2020-0019 and 2021-0010) at SMG-SNU Boramae 12. Jiao Z, Luo B, Xiang S, et al., 2019, 3D printing of HA/PCL
Medical Center, Seoul, Republic of Korea.
composite tissue engineering scaffolds. Adv Ind Eng Polym
Res, 2(4): 196–202.
Consent for publication
13. Zimmerling A, Yazdanpanah Z, Cooper DML, et al., 2021, 3D
Not applicable. printing PCL/nHA bone scaffolds: Exploring the influence of
material synthesis techniques. Biomater Res, 25(1): 3.
Availability of data 14. Kim SH, Kim SH, Jung Y, 2015, TGF-β3 encapsulated PLCL
Not applicable. scaffold by a supercritical CO2-HFIP co-solvent system for
cartilage tissue engineering. J Control Release, 206: 101–107.
References 15. Kim SH, Jung Y, Kim SH, 2013, A biocompatible tissue scaffold
produced by supercritical fluid processing for cartilage tissue
1. She Y, Fan Z, Wang L, et al., 2021, 3D printed biomimetic engineering. Tissue Eng Part C Methods, 19(3): 181–188.
PCL scaffold as framework interspersed with collagen for
long segment tracheal replacement. Front Cell Dev Biol, 9: 16. Hyvärinen M, Jabeen R, Kärki T, 2020, The modelling of
1-14. extrusion processes for polymers—A review. Polymers,
12(6): 1306.
2. Cha M, Jin Yuan-Zhe, et al., 2021, Three-dimensional
printed polylactic acid scaffold integrated with BMP-2 17. Jariyavidyanont K, Mallardo S, Cerruti P, et al., 2021, Shear
laden hydrogel for precise bone regeneration. Biomater Res, induced crystallization of polyamide 11. Rheol Acta, 60(5):
25(35): 1–11. 231–240.
3. Bahcecioglu G, Hasirci N, Bilgen B, et al., 2019, A 3D printed 18. Gao J, Zhang Q, Wang K, et al., 2012, Effect of shearing on
PCL/hydrogel construct with zone-specific biochemical the orientation, crystallization and mechanical properties of
composition mimicking that of the meniscus. Biofabrication, HDPE/attapulgite nanocomposites. Compos Part A Appl Sci
11(2): 025002. Manuf, 43(4):562–569.
4. Dursun Usal T, Yesiltepe M, Yucel D, et al., 2022, Fabrication 19. Farah S, Anderson DG, Langer R, 2016, Physical and
of a 3D printed PCL nerve guide: In vitro and in vivo testing. mechanical properties of PLA, and their functions in
Macromol Biosci, 22(3): 2100389. widespread applications—A comprehensive review.
Adv Drug Deliv Rev, 107: 367–392.
5. Gao M, Zhang H, Dong W, et al., 2017, Tissue engineered
trachea from a 3D printed scaffold enhances whole segment 20. Kim N, Kim H, Lee J, et al., 2006, Numerical analysis of
tracheal repair. Sci Rep, 7(1): 5246. internal flow and mixing performance in polymer extruder
I: single screw element. Korea Aust. Rheol. J., 18(3): 143-151.
Volume 9 Issue 2 (2023) 48 https://doi.org/10.18063/ijb.v9i2.652