Page 426 - v11i4
P. 426
International Journal of Bioprinting Swelling–shrinking behavior of hydrogel
Figure 6. Humidity distribution in the ambient air with a filament diameter of 0.4 mm, illustrating the geometric variation of the printed filament under
various relative humidity (RH) conditions.
Figure 7. Quantitative comparison of the geometric variation of the printed filaments. (A) Schematic diagram of the transformed filament in the finite
element method model. (B–D) Geometric variation curves of the printed filaments with various diameters: (B) 0.2 mm, (C) 0.3 mm, and (D) 0.4 mm.
Volume 11 Issue 4 (2025) 418 doi: 10.36922/IJB025220222
