Page 88 - MSAM-1-1

Materials Science in Additive Manufacturing A ML model for AM PSP of Ti64

https://doi.org/10.1016/j.jcp.2016.10.070 https://doi.org/10.1007/s12206-017-0413-9
22. Breiman L, 2001, Random forests. Mach Learn, 45: 5–32. 34. Luo Q, Yang S, 2017, Uncertainty of the X-ray diffraction (XRD)
sin technique in measuring residual stresses of physical vapor
2 ¬
https://doi.org/10.1007/978-3-662-56776-0_10
deposition (pvd) hard coatings. Coatings, 7: 128.
23. Gong X, Manogharan G, 2020, Machining behavior and https://doi.org/10.3390/coatings7080128
material properties in additive manufacturing Ti-6Al-4V
parts. International Manufacturing Science and Engineering 35. Demir E, Mercan C, 2018, A physics-based single crystal
Conference, Vol. 84256, p. V001T01A055. plasticity model for crystal orientation and length scale
dependence of machining response. Int J Mach Tools Manuf,
https://doi.org/10.1115/MSEC2020-8487 134: 25–41.
24. Ren S, Chen Y, Liu T, et al., 2019, Effect of build orientation https://doi.org/10.1016/j.ijmachtools.2018.06.004
on mechanical properties and microstructure of Ti-6Al-4V
manufactured by selective laser melting. Metall Mater Trans 36. Huang ZW, Jin SB, Zhou H, et al., 2018, Evolution of
A Phys Metall Mater Sci, 50: 4388–4409. twinning systems and variants during sequential twinning
in cryo-rolled titanium. Int J Plast, 112: 52–67.
https://doi.org/10.1007/s11661-019-05322-w
https://doi.org/10.1016/j.ijplas.2018.08.008
25. Goh GD, Sing SL, Yeong WY, 2021, A review on machine
learning in 3D printing: Applications, potential, and 37. Hémery S, Villechaise P, 2018, Investigation of size effects in
challenges. Artif Intell Rev, 54: 63–94. slip strength of titanium alloys: α nodule size dependence of
the critical resolved shear stress. Metall Mater Trans A Phys
26. Nasiri S, Khosravani MR, 2021, Machine learning in Metall Mater Sci, 49: 4394–4397.
predicting mechanical behavior of additively manufactured
parts. J Mater Res Technol, 14: 1137–1153. https://doi.org/10.1007/s11661-018-4678-0
38. Demir E, 2008, Taylor-based model for micro-machining
27. Sing SL, Kuo CN, Shih CT, et al., 2021, Perspectives of using
machine learning in laser powder bed fusion for metal of single crystal FCC materials including frictional effects-
additive manufacturing. Virtual Phys Prototyp, 16: 372–386. Application to micro-milling process. Int J Mach Tools
Manuf, 48: 1592–1598.
28. Chen T, Guestrin C, 2016, XGBoost: A Scalable Tree Boosting https://doi.org/10.1016/j.ijmachtools.2008.07.002
System. KDD’16, August 13-17, San Francisco, CA, USA.
39. Kline WA, DeVor RE, 1993, The effect of runout on cutting
29. Przybyla CP, Mcdowell DL, 2012, Microstructure-sensitive geometry and forces in end milling. Int J Mach Tool Des Res,
extreme-value probabilities of high-cycle fatigue for surface 23: 123–140.
vs. subsurface crack formation in duplex Ti-6Al-4V. Acta
Mater, 60: 293–305. https://doi.org/10.1016/0020-7357(83)90012-4
https://doi.org/10.1016/j.actamat.2011.09.031 40. Priddy MW, Paulson NH, Kalidindi SR, et al.,
2017, Strategies for rapid parametric assessment of
30. Turner DM, Niezgoda SR, Kalidindi SR, 2016, Efficient microstructure-sensitive fatigue for HCP polycrystals. Int J
computation of the angularly resolved chord length Fatigue, 104: 231–242.
distributions and lineal path functions in large microstructure
datasets. Model Simul Mater Sci Eng, 24: 075002. https://doi.org/10.1016/j.ijfatigue.2017.07.015
https://doi.org/10.1088/0965-0393/24/7/075002 41. Demir E, 2009, A Taylor-based plasticity model for orthogonal
machining of single-crystal FCC materials including frictional
31. Paulson NH, Priddy MW, McDowell DL, et al., 2018, Data- effects. Int J Adv Manuf Technol, 40: 847–856.
driven reduced-order models for rank-ordering the high
cycle fatigue performance of polycrystalline microstructures. https://doi.org/10.1007/s00170-008-1409-5
Mater Des, 154: 170–183. 42. Zhang D, Qian L, Mao B, et al., 2018, A data-driven design
https://doi.org/10.1016/j.matdes.2018.05.009 for fault detection of wind turbines using random forests
and XGboost. IEEE Access, 6: 21020–21031.
32. Hansen M, 1958, Constitution of Alloys. McGraw-Hill
Company Inc., New York. p678. https://doi.org/10.1109/ACCESS.2018.281867
43. Dhaliwal SS, Al Nahid A, Abbas R, 2018, Effective intrusion
33. Telrandhe SV, Saxena AK, Mishra S, 2017, Effect of
microstructure and cutting speed on machining behavior of detection system using XGBoost. Information, 9: 149.
Ti6Al4V alloy. J Mech Sci Technol, 31: 2177–2184. https://doi.org/10.3390/info9070149

Volume 1 Issue 1 (2022) 16 https://doi.org/10.18063/msam.v1i1.6