Page 46 - MSAM-3-2

Materials Science in Additive Manufacturing LPBF of Ti-Al-graded multi-materials

doi: 10.1016/j.jmatprotec.2021.117439 doi: 10.1016/j.optlastec.2023.109247
22. Huang S, Kumar P, Yeong WY, Narayan RL, Ramamurty 33. Li Y, Tang X, Lu F, et al. Dual beam laser fusion-brazed
U. Fracture behavior of laser powder bed fusion fabricated Ti6Al4V/AA7075 dissimilar lap joint: Crack inhibition
Ti41Nb via in-situ alloying. Acta Mater. 2022;225:117593. via inoculation with TiC nanoparticles. Mater Charact.
doi: 10.1016/j.actamat.2021.117593 2022;191:112127.
23. Blakey-Milner B, Gradl P, Snedden G, et al. Metal additive doi: 10.1016/j.matchar.2022.112127
manufacturing in aerospace: A review. Mater Des. 34. Gerold U, Herzig C. Titanium self-diffusion and chemical diffusion
2021;209:110008. in bcc Ti-Al alloys. Defect Diffus Forum. 1997;143:437-442.
doi: 10.1016/j.matdes.2021.110008 doi: 10.4028/www.scientific.net/DDF.143-147.437
24. Kagerer S, Hudak OE, Schloffer M, Riedl H, Mayrhofer PH. 35. Shi Q, Zhong G, Sun Y, Politis C, Yang S. Effects of laser
TGO formation and oxygen diffusion in Al-rich gamma-TiAl melting plus remelting on interfacial macrosegregation
PVD-coatings on TNM alloys. Scr Mater. 2022;210:114455. and resulting microstructure and microhardness of laser
doi: 10.1016/j.scriptamat.2021.114455 additive manufactured H13/IN625 bimetals. J Manuf
Process. 2021;71:345-355.
25. Hotz H, Zimmermann M, Gerco S, Kirsch B, Aurich JC.
Additive manufacturing of functionally graded Ti-Al doi: 10.1016/j.jmapro.2021.09.036
structures by laser-based direct energy deposition. J Manuf 36. Yao L, Huang S, Ramamurty U, Xiao Z. On the formation
Process. 2021;68:1524-1534. of “Fish-scale” morphology with curved grain interfacial
doi: 10.1016/j.jmapro.2021.06.068 microstructures during selective laser melting of dissimilar
alloys. Acta Mater. 2021;220:117331.
26. Jing Z, Liu X, Li L, Wang W, Xu G, Chang L. Microstructure
and mechanical properties of transition zone in laser doi: 10.1016/j.actamat.2021.117331
additive manufacturing of TC4/AlSi12 bimetal structure. 37. Xie H, Lv J. Precipation of TiAl3 in remelting Al-5Ti-1B
Mater Res Express. 2022;9(1):016513. and the grain refinement of 7050 alloy. Mater Res Express.
doi: 10.1088/2053-1591/ac47c8 2021;8(6):066513.
27. Wu X, Zhang D, Yi D, et al. Interfacial characterization doi: 10.1088/2053-1591/ac0559
and reaction mechanism of Ti/Al multi-material structure 38. Liu ZQ, Zhu XO, Yin GL, Zhou Q. Direct bonding of
during laser powder bed fusion process. Mater Charact. bimetallic structure from Ti6Al4V to Ti48Al2Cr2Nb
2022;192:112195. alloy by laser additive manufacturing. Mater Sci Technol.
doi: 10.1016/j.matchar.2022.112195 2022;38(1):39-44.
28. Liu Y, Liu C, Liu W, et al. Microstructure and properties of doi: 10.1080/02670836.2021.2023287
Ti/Al lightweight graded material by direct laser deposition. 39. Xi L, Ding K, Zhang H, Gu D. In-situ synthesis of aluminum
Mater Sci Technol. 2018;34(8):945-951. matrix nanocomposites by selective laser melting of carbon
doi: 10.1080/02670836.2017.1412042 nanotubes modified Al-Mg-Sc-Zr alloys. J Alloy Compd.
2022; 891:162047.
29. Kothari K, Radhakrishnan R, Wereley NM. Advances in
gamma titanium aluminides and their manufacturing doi: 10.1016/j.jallcom.2021.162047
techniques. Prog Aerosp Sci. 2012;55:1-16. 40. Huang S, Kumar P, Lim CWJ, Radhakrishnan J, Ramamurty
doi: 10.1016/j.paerosci.2012.04.001 U. Fracture behavior of PH15-5 stainless steel manufactured
via directed energy deposition. Mater Des. 2023;235:112421.
30. Kattner UR, Lin JC, Chang YA. Thermodynamic assessment
and calculation of the Ti-Al system. Metall Trans A. doi: 10.1016/j.addma.2019.100970
1992;23(8):2081-2090. 41. Karimi J, Antonov M, Kollo L, Prashanth KG. Role of laser
doi: 10.1007/BF02646001 remelting and heat treatment in mechanical and tribological
properties of selective laser melted Ti6Al4V alloy. J Alloy
31. Tian Y, Shen J, Hu S, et al. Effect of deposition layer on Compd. 2022;897:163207.
microstructure of Ti-Al bimetallic structures fabricated by
wire and arc additive manufacturing. Sci Technol Weld Join. doi: 10.1016/j.jallcom.2021.163207
2022;27(1):22-32. 42. Jiao Z, Ma C, Fu J, et al. The effects of Zr contents
doi: 10.1080/13621718.2021.1996850 on microstructure and properties of laser additive
manufactured Ti-6.5Al-3.5Mo-0.3Si-xZr alloys. J Alloy
32. Cook PS, Ritchie DJ. Determining the laser absorptivity of
Ti-6Al-4V during laser powder bed fusion by calibrated Compd. 2018;745:592-598.
melt pool simulation. Opt Laser Technol. 2023;162:109247. doi: 10.1016/j.jallcom.2018.02.079

Volume 3 Issue 2 (2024) 14 doi: 10.36922/msam.3088