Page 47 - MSAM-3-2

Materials Science in Additive Manufacturing LPBF of Ti-Al-graded multi-materials

43. Bi J, Lei Z, Chen Y, et al. Microstructure and mechanical 46. Zhang Y, Groden C, Nyberg E, et al. W7Ni3Fe-Ti6Al4V
properties of a novel Sc and Zr modified 7075 aluminum bimetallic layered structures via directed energy deposition.
alloy prepared by selective laser melting. Mat Sci Eng A Virtual Phys Prototyp. 2023;18(1):e2137048.
Struct. 2019;768:138478.
doi: 10.1080/17452759.2022.2137048
doi: 10.1016/j.msea.2019.138478
47. Onuike B, Bandyopadhyay A. Functional bimetallic joints of
44. Casati R, Lemke JN, Alarcon AZ, Vedani M. Aging behavior Ti6Al4V to SS410. Addit Manuf. 2020;31:100931.
of high-strength Al alloy 2618 produced by selective laser doi: 10.1016/j.addma.2019.100931
melting. Metall Mater Trans A. 2017;48(2):575-579.
48. Zhang Y, Bandyopadhyay A. Influence of compositionally
doi: 10.1007/s11661-016-3883-y
graded interface on microstructure and compressive
45. Zhang Y, Bandyopadhyay A. Direct fabrication of bimetallic deformation of 316L stainless steel to Al12Si aluminum
Ti6Al4V+Al12Si structures via additive manufacturing. alloy bimetallic structures. ACS Appl Mater Interfaces.
Addit Manuf. 2019;29:100783. 2021;13(7):9174-9185.
doi: 10.1016/j.addma.2019.100783 doi: 10.1021/acsami.0c21478

Volume 3 Issue 2 (2024) 15 doi: 10.36922/msam.3088