Page 63 - MSAM-3-2

Materials Science in Additive Manufacturing Heat treatment on bimetallic parts

alloys with austenitic stainless-steel: A review. J Press Vessel fusion of 17–4 PH stainless steel: A comparative study on
Technol. 2023;145(1):011506. the effect of heat treatment on the microstructure evolution
and mechanical properties. Addit Manuf. 2021;46:102176.
doi: 10.1115/1.4055329
doi: 10.1016/j.addma.2021.102176
41. Bina MH, Dehghani F, Salimi M. Effect of heat treatment on
bonding interface in explosive welded copper/stainless steel. 48. Wen Y, Gao J, Narayan RL, et al. Microstructure-property
Mater Des. 2013;45:504-509. correlations in as-built and heat-treated compositionally
graded stainless steel 316L-Inconel 718 alloy fabricated by
doi: 10.1016/j.matdes.2012.09.037
laser powder bed fusion. Mater Sci Eng A. 2023;862:144515.
42. Liu X, Fan J, Zhang P, et al. Influence of heat treatment doi: 10.1016/j.msea.2022.144515
on Inconel 625 superalloy sheet: Carbides, γ’’, δ phase
precipitation and tensile deformation behavior. J Alloys 49. Carrozza A, Lorenzi S, Carugo F, et al. A comparative
Compd. 2023;930:167522. analysis between material extrusion and other additive
manufacturing techniques: Defects, microstructure
doi: 10.1016/j.jallcom.2022.167522
and corrosion behavior in nickel alloy 625. Mater Des.
43. Jiang W, Li G, Wu Y, Liu X, Fan Z. Effect of heat treatment 2023;225:111545.
on bonding strength of aluminum/steel bimetal produced by a doi: 10.1016/j.matdes.2022.111545
compound casting. J Mater Process Technol. 2018;258:239-250.
50. Li C, White R, Fang XY, Weaver M, Guo YB. Microstructure
doi: 10.1016/j.jmatprotec.2018.04.006
evolution characteristics of Inconel 625 alloy from
44. Marchese G, Lorusso M, Parizia S, et al. Influence of heat selective laser melting to heat treatment. Mater Sci Eng A.
treatments on microstructure evolution and mechanical 2017;705:20-31.
properties of Inconel 625 processed by laser powder bed doi: 10.1016/j.msea.2017.08.058
fusion. Mater Sci Eng A. 2018;729:64-75.
51. An S, Eo DR, Sohn I, Choi K. Homogenization on solution
doi: 10.1016/j.msea.2018.05.044
treatment and its effects on the precipitation-hardening of
45. Floreen S, Fuchs GE, Yang WJ. The metallurgy of alloy 625. selective laser melted 17-4PH stainless steel. J Mater Sci
Superalloys. 1994;718(625):13-37. Technol. 2023;166:47-57.
46. Hu Y, Lin X, Li Y, et al. Influence of heat treatments on the doi: 10.1016/j.jmst.2023.04.055
microstructure and mechanical properties of Inconel 625 52. Vinod A, Warghane S, Murugan A, Balashanmugam N,
fabricated by directed energy deposition. Mater Sci Eng A.
2021;817:141309. Venkaiah N. Microstructure and interfacial characteristics
of inconel 625-Ti6Al4V bimetallic structures produced by
doi: 10.1016/j.msea.2021.141309 directed energy deposition. J Mater Eng Perform. 2023; 33:1-12.
47. Sabooni S, Chabok A, Feng SC, et al. Laser powder bed doi: 10.1007/s11665-023-08250-4

Volume 3 Issue 2 (2024) 16 doi: 10.36922/msam.3281