Page 121 - MSAM-4-2

Materials Science in Additive Manufacturing Impact of cell angle on AlSi10Mg structures

12. Zhang L, Feih S, Daynes S, et al. Energy absorption shock structure in porous metals. J Mech Phys Solids.
characteristics of metallic triply periodic minimal surface 2021;154:104508.
sheet structures under compressive loading. Addit Manuf. doi: 10.1016/j.jmps.2021.104508
2018;23:505-515.
23. Czarnota C, Molinari A, Mercier S. Steady shock waves
doi: 10.1016/j.addma.2018.08.007
in porous metals: Viscosity and micro-inertia effects. Int J
13. Zhao M, Zhang DZ, Liu F, Li Z, Ma Z, Ren Z. Mechanical Plast. 2020;135:102816.
and energy absorption characteristics of additively doi: 10.1016/j.ijplas.2020.102816
manufactured functionally graded sheet lattice structures
with minimal surfaces. Int J Mech Sci. 2020;167:105262. 24. Fíla T, Koudelka P, Falta J, et al. Dynamic impact testing
of cellular solids and lattice structures: Application of
doi: 10.1016/j.ijmecsci.2019.105262
two-sided direct impact Hopkinson bar. Int J Impact Eng.
14. Hu D, Mei X, Shi P, Zhou X. Inner-pipe structure to improve 2021;148:103767.
column heterogeneity and peak shape. J Chromatogr Sci. doi: 10.1016/j.ijimpeng.2020.103767
2014;53:565-570.
25. Jin N, Wang F, Wang Y, Zhang B, Cheng H, Zhang H.
doi: 10.1093/chromsci/bmu085
Failure and energy absorption characteristics of four
15. Liu YJ, Zhang ZL, Wang JC, et al. In-situ micro-CT analysis lattice structures under dynamic loading. Mater Des.
of deformation behavior in sandwich-structured meta- 2019;169:107655.
stable beta Ti-35Nb alloy. Trans Nonferrous Met Soc China. doi: 10.1016/j.matdes.2019.107655
2024;34:2552-2562.
26. Cao X, Duan S, Liang J, Wen W, Fang D. Mechanical properties
doi: 10.1016/S1003-6326(24)66559-3
of an improved 3D-printed rhombic dodecahedron stainless
16. Wang Z. Recent advances in novel metallic honeycomb steel lattice structure of variable cross section. Int J Mech Sci.
structure. Compos Part B Eng. 2019;166:731-741. 2018;145:53-63.
doi: 10.1016/j.compositesb.2019.02.011 doi: 10.1016/j.ijmecsci.2018.07.006
17. Song ZL, Ma LQ, Wu ZJ, He DP. Effects of viscosity on 27. Kim JH, Kim D, Lee MG, Lee JK. Multiscale analysis of
cellular structure of foamed aluminum in foaming process. open-cell aluminum foam for impact energy absorption.
J Mater Sci. 2000;35:15-20. J Mater Eng Perform. 2016;25:3977-3984.
doi: 10.1023/A:1004715926692 doi: 10.1007/s11665-016-2187-0
18. Zhang M, Bi G, Chen J. Research on impact resistance 28. Tancogne-Dejean T, Spierings AB, Mohr D. Additively-
of AlSi7Mg uniform and gradient porous structures manufactured metallic micro-lattice materials for high
manufactured by laser powder bed fusion. MSAM. specific energy absorption under static and dynamic
2024;3:5729. loading. Acta Mater. 2016;116:14-28.
doi: 10.36922/msam.5729 doi: 10.1016/j.actamat.2016.05.054
19. Al-Saedi DSJ, Masood SH, Faizan-Ur-Rab M, Alomarah A, 29. Wang JC, Liu YJ, Rabadia CD, Liang SX, Sercombe TB,
Ponnusamy P. Mechanical properties and energy absorption Zhang LC. Microstructural homogeneity and mechanical
capability of functionally graded F2BCC lattice fabricated by behavior of a selective laser melted Ti-35Nb alloy produced
SLM. Mater Des. 2018;144:32-44. from an elemental powder mixture. J Mater Sci Technol.
2021;61:221-233.
doi: 10.1016/j.matdes.2018.01.059
doi: 10.1016/j.jmst.2020.05.052
20. Liu YJ, Zhang JS, Liu XC, et al. Non-layer-wise fracture
and deformation mechanism in beta titanium cubic lattice 30. Zheng Z, Qiu S, Yue X, Wang J, Hou J. Detecting irradiation
structure manufactured by selective laser melting. Mater Sci defects in materials: A machine learning approach to analyze
Eng A. 2021;822:141696. helium bubble images. J Nucl Mater. 2024;596:155117.
doi: 10.1016/j.msea.2021.141696 doi: 10.1016/j.jnucmat.2024.155117
21. Şerban DA, Negru R, Sărăndan S, Belgiu G, Marşavina L. 31. Lu WQ, Liu YJ, Wu X, Liu XC, Wang JC. Corrosion and
Numerical and experimental investigations on the passivation behavior of Ti-6Al-4V surfaces treated with
mechanical properties of cellular structures with open high-energy pulsed laser: A comparative study of cast and
Kelvin cells. Mech Adv Mater Struct. 2021;28:1367-1376. 3D-printed specimens in a NaCl solution. Surf Coat Technol.
2023;470:129849.
doi: 10.1080/15376494.2019.1669093
doi: 10.1016/j.surfcoat.2023.129849
22. Lovinger Z, Czarnota C, Ravindran S, Molinari A,
Ravichandran G. The role of micro-inertia on the 32. Wei SY, Ji LN, Wu WJ, Ma HL. Selective laser melting

Volume 4 Issue 2 (2025) 17 doi: 10.36922/MSAM025130019