Page 122 - MSAM-4-2

Materials Science in Additive Manufacturing Impact of cell angle on AlSi10Mg structures

of lanthanum oxide-reinforced tungsten composites: characteristics in laser powder bed fusion: An overview of
Microstructure and mechanical properties. Tungsten. single and multi-track melt pools for process optimization.
2022;4:67-78. Adv Powder Mater. 2023;2:100137.
doi: 10.1007/s42864-021-00127-0 doi: 10.1016/j.apmate.2023.100137
33. Ma HY, Wang JC, Qin P, et al. Advances in additively 43. Guo S, Yue X, Kitazono K. Anisotropic compression
manufactured titanium alloys by powder bed fusion and behavior of additively manufactured porous titanium with
directed energy deposition: Microstructure, defects, and ordered open-cell structures at different temperatures.
mechanical behavior. J Mater Sci Technol. 2024;183:32-62. Mater Trans. 2021;62:1771-1776.
doi: 10.1016/j.jmst.2023.11.003 doi: 10.2320/matertrans.MT-M2021149
34. Ma HY, Wang JC, Liu YJ, et al. In-situ microstructural 44. Bezci SE, Klineberg EO, O’Connell GD. Effects of axial
evolution and deformation mechanisms of metastable compression and rotation angle on torsional mechanical
beta titanium fabricated by laser powder bed fusion under properties of bovine caudal discs. J Mech Behav Biomed
flexural stress. Mater Sci Eng A. 2025;925:147873. Mater. 2018;77:353-359.
doi: 10.1016/j.msea.2025.147873 doi: 10.1016/j.jmbbm.2017.09.022
35. Wang JC, Liu YJ, Liang SX, et al. Comparison of 45. Yang J, Gu D, Lin K, et al. Laser powder bed fusion of
microstructure and mechanical behavior of Ti-35Nb mechanically efficient helicoidal structure inspired by
manufactured by laser powder bed fusion from elemental mantis shrimp. Int J Mech Sci. 2022;231:107573.
powder mixture and prealloyed powder. J Mater Sci Technol.
2022;105:1-16. doi: 10.1016/j.ijmecsci.2022.107573
doi: 10.1016/j.jmst.2021.07.021 46. Aktürk M, Boy M, Gupta MK, Waqar S, Krolczyk GM,
Korkmaz ME. Numerical and experimental investigations
36. Zhang LC, Wang JC. Stabilizing 3D-printed metal alloys. of built orientation dependent Johnson-Cook model for
Science. 2024;383:586-587. selective laser melting manufactured AlSi10Mg. J Mater Res
doi: 10.1126/science.adn6566 Technol. 2021;15:6244-6259.
37. Lu W, Liu Y, Wu X, Liu X, Wang J. Corrosion behavior and doi: 10.1016/j.jmrt.2021.11.062
microstructural effects on passivation film mechanisms in 47. Nurel B, Nahmany M, Frage N, Stern A, Sadot O. Split
forged Ti-5Al-5Mo-5V-1Cr-1Fe titanium alloy under laser Hopkinson pressure bar tests for investigating dynamic
surface remelting. Corros Sci. 2024;241:112542. properties of additively manufactured AlSi10Mg alloy by
doi: 10.1016/j.corsci.2024.112542 selective laser melting. Addit Manuf. 2018;22:823-833.
38. Wang JC, Liu YJ, Qin P, Liang SX, Sercombe TB, Zhang LC. doi: 10.1016/j.addma.2018.06.001
Selective laser melting of Ti–35Nb composite from elemental 48. Hou Y, Li Y, Cai X, et al. Mechanical response and response
powder mixture: Microstructure, mechanical behavior and mechanism of AlSi10Mg porous structures manufactured
corrosion behavior. Mater Sci Eng A. 2019;760:214-224. by laser powder bed fusion: Experimental, theoretical and
doi: 10.1016/j.msea.2019.06.001 numerical studies. Mater Sci Eng A. 2022;849:143381.
39. Nie X, Chen Z, Qi Y, Zhang H, Zhu H. Spreading behavior doi: 10.1016/j.msea.2022.143381
and hot cracking mechanism of single tracks in high 49. Andrew JJ, Schneider J, Ubaid J, Velmurugan R, Gupta NK,
strength Al–Cu–Mg–Mn Alloy fabricated by laser powder Kumar S. Energy absorption characteristics of additively
bed fusion. Acta Metall Sin (Engl Lett). 2023;36:1454-1464. manufactured plate-lattices under low- velocity impact
doi: 10.1007/s40195-023-01553-4 loading. Int J Impact Eng. 2021;149:103768.
40. Lin S, Deng YL, Lin HQ, et al. Microstructure, mechanical doi: 10.1016/j.ijimpeng.2020.103768
properties and stress corrosion behavior of friction stir 50. Al-Ketan O, Rowshan R, Abu Al-Rub RK. Topology-
welded joint of Al–Mg–Si alloy extrusion. Rare Met. mechanical property relationship of 3D printed strut,
2023;42:2057-2067. skeletal, and sheet based periodic metallic cellular materials.
doi: 10.1007/s12598-018-1126-7 Addit Manuf. 2018;19:167-183.
41. Sun SB, Zheng LJ, Liu JH, Zhang H. Microstructure, doi: 10.1016/j.addma.2017.12.006
cracking behavior and control of Al–Fe–V–Si alloy produced 51. Paul MJ, Liu Q, Best JP, et al. Fracture resistance of
by selective laser melting. Rare Met. 2023;42:1353-1362.
AlSi10Mg fabricated by laser powder bed fusion. Acta
doi: 10.1007/s12598-016-0846-9 Mater. 2021;211:116869.
42. Wang JC, Zhu R, Liu YJ, Zhang LC. Understanding melt pool doi: 10.1016/j.actamat.2021.116869

Volume 4 Issue 2 (2025) 18 doi: 10.36922/MSAM025130019