Page 123 - MSAM-4-2

Materials Science in Additive Manufacturing Impact of cell angle on AlSi10Mg structures

52. Peters M, Brodie EG, Thomas S, et al. On the importance of 57. Rubben T, Revilla RI, De Graeve I. Influence of heat
nano-oxide control in laser powder bed fusion manufactured treatments on the corrosion mechanism of additive
Ni-based alloys to enhance fracture properties. Materialia. manufactured AlSi10Mg. Corros Sci. 2019;147:406-415.
2023;32:101958.
doi: 10.1016/j.corsci.2018.11.038
doi: 10.1016/j.mtla.2023.101958
58. Liu B, Li BQ, Li Z. Selective laser remelting of an additive
53. Shenghao C, Xiang W, Haowei B, Yujing L, Yihao W, layer manufacturing process on AlSi10Mg. Results Phys.
Jincheng W. Effects of selective laser surface treatment on 2019;12:982-988.
plasticity of 2060 Al-Li alloy. Spec Cast Nonferrous Alloys. doi: 10.1016/j.rinp.2018.12.018
2025;45:334-341.
59. Li Z, Li Z, Tan Z, Xiong DB, Guo Q. Stress relaxation and
doi: 10.15980/j.tzzz.T20240066
the cellular structure-dependence of plastic deformation
54. Wang R, Wang J, Lei LM, et al. Laser additive manufacturing in additively manufactured AlSi10Mg alloys. Int J Plast.
of strong and ductile Al-12Si alloy under static magnetic 2020;127:102640.
field. J Mater Sci Technol. 2023;163:101-112.
doi: 10.1016/j.ijplas.2019.12.003
doi: 10.1016/j.jmst.2023.04.021
60. Wang H, Fu Y, Su M, Hao H. Effect of structure design on
55. Sheng X, Guo A, Guo S, et al. Laser powder bed fusion for compressive properties and energy absorption behavior of
the fabrication of triply periodic minimal surface lattice ordered porous aluminum prepared by rapid casting. Mater
structures: Synergistic macroscopic and microscopic Des. 2019;167:107631.
optimization. J Manuf Process. 2024;119:179-192.
doi: 10.1016/j.matdes.2019.107631
doi: 10.1016/j.jmapro.2024.03.081
61. Chua C, Sing SL, Chua CK. Characterisation of in-situ
56. Chen R, Zheng C, Ma H, et al. Multi-parameter optimization alloyed titanium-tantalum lattice structures by laser powder
and corrosion behavior of FeCoNiCrAl HEA coatings via bed fusion using finite element analysis. Virtual Phys
laser cladding. Metals. 2025;15:406. Prototyp. 2023;18:e2138463.
doi: 10.3390/met15040406 doi: 10.1080/17452759.2022.2138463

Volume 4 Issue 2 (2025) 19 doi: 10.36922/MSAM025130019