Page 105 - ESAM-1-1

Engineering Science in
Additive Manufacturing Mechanical property of metal-based IPC

metamaterial combing plate lattice and hollow-truss lattice with programmable isotropy and elastic stiffness up to the
with advanced mechanical performances. Addit Manuf. theoretical limit. Compos Part B Eng. 2024;284:111656.
2023;76:103764.
doi: 10.1016/j.compositesb.2024.111656
doi: 10.1016/j.addma.2023.103764
20. Bouteldja A, Louar MA, Hemmouche L, Gilson L, Miranda-
10. Bian Y, Wang R, Yang F, et al. Mechanical properties of Vicario A, Rabet L. Experimental investigation of the
internally hierarchical multiphase lattices inspired by quasi-static and dynamic compressive behavior of polymer-
precipitation strengthening mechanisms. ACS Appl Mater based 3D-printed lattice structures. Int J Impact Eng.
Interfaces. 2023;15(12):15928-15937. 2023;180:104640.
doi: 10.1021/acsami.2c20063 doi: 10.1016/j.ijimpeng.2023.104640
11. Wang X, Li X, Li Z, Wang Z, Zhai W. Superior strength, 21. Nguyen PC, Ryu I. Size dependent scaling law of plastic flow
toughness, and damage-tolerance observed in microlattices in FCC nanolattices: A dislocation dynamics study. Acta
of aperiodic unit cells. Small. 2024;20(23):2307369. Mater. 2024;274:120022.
doi: 10.1002/smll.202307369 doi: 10.1016/j.actamat.2024.120022
12. Li Z, Wang X, Li X, Wang Z, Zhai W. New class of 22. Zhang J, An Q. Topology optimization of fibre reinforced
multifunctional bioinspired microlattice with excellent polymer lattice structures for additive manufacturing.
sound absorption, damage tolerance, and high specific Compos Sci Technol. 2023;242:110144.
strength. ACS Appl Mater Interfaces. 2023;15(7):9940-9952.
doi: 10.1016/j.compscitech.2023.110144
doi: 10.1021/acsami.2c19456
23. Zhang W, Chen J, Li X, Lu Y. Liquid metal-polymer
13. Xiao L, Xu X, Feng G, Li S, Song W, Jiang Z. Compressive microlattice metamaterials with high fracture toughness and
performance and energy absorption of additively damage recoverability. Small. 2020;16(46):2004190.
manufactured metallic hybrid lattice structures. Int J Mech doi: 10.1002/smll.202004190
Sci. 2022;219:107093.
24. Liu C, Ni R, Ji K, Zhao A, Sun X, Wu H. Improving mechanical
doi: 10.1016/j.ijmecsci.2022.107093
properties of lattice structures using nonuniform hollow
14. Wei YL, Yang QS, Liu X, Tao R. Multi-bionic mechanical struts. Int J Mech Sci. 2024;283:109674.
metamaterials: A composite of FCC lattice and bone doi: 10.1016/j.ijmecsci.2024.109674
structures. Int J Mech Sci. 2022;213:106857.
25. Wu W, Xia R, Qian G, et al. Mechanostructures: Rational
doi: 10.1016/j.ijmecsci.2021.106857
mechanical design, fabrication, performance evaluation,
15. Zhao M, Zhang DZ, Li Z, Zhang T, Zhou H, Ren Z. and industrial application of advanced structures. Prog
Design, mechanical properties, and optimization of Mater Sci. 2023;131:101021.
BCC lattice structures with taper struts. Compos Struct. doi: 10.1016/j.pmatsci.2022.101021
2022;295(12):115830.
26. Wang X, Li X, Li Z, Wang Z, Zhai W. A ribbed strategy
doi: 10.1016/j.compstruct.2022.115830
disrupts conventional metamaterial deformation
16. Cheng H, Zhu X, Cheng X, et al. Mechanical metamaterials mechanisms for superior energy absorption. Virtual Phys
made of freestanding quasi-BCC nanolattices of gold and Prototy. 2024;19(1):e2337310.
copper with ultra-high energy absorption capacity. Nat doi: 10.1080/17452759.2024.2337310
Commun. 2023;14(1):1243.
27. Zeng Q, Xu M, Wang M, et al. Mechanical properties
doi: 10.1038/s41467-023-36965-4
of additively manufactured AlSi10Mg alloy gradient
17. Li X, Tan YH, Wang P, et al. Metallic microlattice and honeycomb with rib reinforcement at different strain rates.
epoxy interpenetrating phase composites: Experimental Thin Wall Struct. 2025;208:112821.
and simulation studies on superior mechanical properties doi: 10.1016/j.tws.2024.112821
and their mechanisms. Compos Part A Appl Sci Manuf.
2020;135:105934. 28. Wang Z, Zhou Y, Wang X, Wei K. Compression behavior
of strut-reinforced hierarchical lattice-experiment and
doi: 10.1016/j.compositesa.2020.105934
simulation. Int J Mech Sci. 2021;210:106749.
18. Lee G, Jeong SG, Kwon J, et al. Shear deformation behavior doi: 10.1016/j.ijmecsci.2021.106749
of additively manufactured 316L stainless steel lattice
structures. Addit Manuf. 2024;93:104425. 29. Wang P, Yang F, Zheng B, et al. Breaking the tradeoffs
between different mechanical properties in bioinspired
doi: 10.1016/j.addma.2024.104425
hierarchical lattice metamaterials. Adv Funct Mater.
19. Jiang F, Seetoh IP, Lee H, et al. Compound nested lattices 2023;33(45):2305978.

Volume 1 Issue 1 (2025) 10 doi: 10.36922/esam.8554