Page 523 - IJB-10-2

International Journal of Bioprinting Oozing 3D-printed scaffolds for tissue engineering

15. Szojka A, Lalh K, Andrews SHJ, Jomha NM, Osswald M, doi: 10.1016/j.bprint.2020.e00116
Adesida AB. Biomimetic 3D printed scaffolds for meniscus 28. Ng WL, Huang X, Shkolnikov V, Suntornnond R, Yeong
tissue engineering. Bioprinting. 2017;8:1-7. WY. Polyvinylpyrrolidone-based bioink: influence of bioink
doi: 10.1016/j.bprint.2017.08.001
properties on printing performance and cell proliferation
16. Kabirian F, Ditkowski B, Zamanian A, Heying R, Mozafari during inkjet-based bioprinting. Bio-Des Manuf.
M. An innovative approach towards 3D-printed scaffolds 2023;6(6):676-690.
for the next generation of tissue-engineered vascular grafts. doi: 10.1007/s42242-023-00245-3
Mater Today Proc. 2018;5(7):15586-15594.
doi: 10.1016/j.matpr.2018.04.167 29. Chartrain NA, Williams CB, Whittington AR. A review on
fabricating tissue scaffolds using vat photopolymerization.
17. DeStefano V, Khan S, Tabada A. Applications of PLA in Acta Biomater. 2018;74:90-111.
modern medicine. Eng Regen. 2020;1:76-87. doi: 10.1016/j.actbio.2018.05.010
doi: 10.1016/j.engreg.2020.08.002
30. Moroni L, Boland T, Burdick JA, et al. Biofabrication: a
18. Mota C, Puppi D, Chiellini F, Chiellini E. Additive manufacturing guide to technology and terminology. Trends Biotechnol.
techniques for the production of tissue engineering constructs. 2018;36(4):384-402.
J Tissue Eng Regen Med. 2015;9(3):174-190. doi: 10.1016/j.tibtech.2017.10.015
doi: 10.1002/term.1635
31. Mwema FM, Akinlabi ET. Basics of fused deposition
19. Chung JJ, Im H, Kim SH, Park JW, Jung Y. Toward biomimetic modelling (FDM). In: Castro M, eds. SpringerBriefs in
scaffolds for tissue engineering: 3D printing techniques in Applied Sciences and Technology. Cham, Switzerland:
regenerative medicine. Front Bioeng Biotechnol. 2020;8. Springer; 2020: 1-15.
doi: 10.3389/fbioe.2020.586406 doi: 10.1007/978-3-030-48259-6_1
20. Alagoz AS, Hasirci V. 3D printing of polymeric tissue 32. Hoque ME, Chuan YL, Pashby I. Extrusion based rapid
engineering scaffolds using open-source fused deposition prototyping technique: an advanced platform for tissue
modeling. Emergent Mater. 2020;3(4):429-439. engineering scaffold fabrication. Biopolymers. 2012;
doi: 10.1007/s42247-019-00048-2 97(2):83-93.
21. Gillispie G, Prim P, Copus J, et al. Assessment methodologies doi: 10.1002/bip.21701
for extrusion-based bioink printability. Biofabrication. 33. Gross BC, Erkal JL, Lockwood SY, Chen C, Spence DM.
2020;12(2). Evaluation of 3D printing and its potential impact on
doi: 10.1088/1758-5090/ab6f0d biotechnology and the chemical sciences. Anal Chem.
22. Papaioannou TG, Manolesou D, Dimakakos E, Tsoucalas 2014;86(7):3240-3253.
G, Vavuranakis M, Tousoulis D. 3D bioprinting methods doi: 10.1021/ac403397r
and techniques: applications on artificial blood vessel 34. Yazar A, Top N, Bülbül R, Şahin I. Effect of infill density and
fabrication. Acta Cardiol Sin. 2019;35(3):284-289. infill pattern on mechanical properties in fused deposition
doi: 10.6515/ACS.201905_35(3).20181115A modeling (FDM). In: Proceedings of the Innovative
23. Lee JS, Hong JM, Jung JW, Shim JH, Oh JH, Cho DW. 3D Approaches in Additive Manufacturing Congress (IA4AM).
printing of composite tissue with complex shape applied to Gazi University; 2021.
ear regeneration. Biofabrication. 2014;6(2). 35. Fernandez-Vicente M, Calle W, Ferrandiz S, Conejero A. Effect
doi: 10.1088/1758-5082/6/2/024103 of infill parameters on tensile mechanical behavior in desktop
24. Lee A, Hudson AR, Shiwarski DJ, et al. 3D bioprinting of 3D printing. 3D Print Addit Manuf. 2016;3(3):183-192.
collagen to rebuild components of the human heart. Science. doi: 10.1089/3dp.2015.0036
2019;365(6452):482-487. 36. Zein I, Hutmacher DW, Cheng Tan K, Hin Teoh S. Fused
doi: 10.1126/science.aav9051 deposition modeling of novel scaffold architectures for
25. Jung JW, Lee JS, Cho DW. Computer-aided multiple-head tissue engineering applications. Biomaterials. 2002;23(4):
3D printing system for printing of heterogeneous organ/ 1169-1185.
tissue constructs. Sci Rep. 2016;6. doi: 10.1016/S0142-9612(01)00232-0
doi: 10.1038/srep21685
37. Boparai KS, Singh R, Singh H. Development of rapid tooling
26. Liu J, Zhou Y, Lu J, et al. Injectable, tough and adhesive using fused deposition modeling: a review. Rapid Prototyp J.
zwitterionic hydrogels for 3D-printed wearable strain 2016;22(2):281-299.
sensors. Chem Eng J. 2023;475:146340. doi: 10.1108/RPJ-04-2014-0048
doi: 10.1016/J.CEJ.2023.146340
38. Günaydın K, Türkmen HS. Common FDM 3D printing
27. Ramesh S, Harrysson OLA, Rao PK, et al. Extrusion defects. In: Proceedings of the International Congress on 3D
bioprinting: recent progress, challenges, and future Printing (Additive Manufacturing) Technologies and Digital
opportunities. Bioprinting. 2021;21. Industry; 2018.

Volume 10 Issue 2 (2024) 515 doi: 10.36922/ijb.2337