Page 50 - IJB-4-2

Bioprinting of artificial blood vessels

Advances in vascular tissue engineering using protein-based 460–472. https://doi.org/10.1007/s12195-014-0340-0
biomaterials. Tissue Eng, 13(11): 2601–2613. https://doi. 26. Cui X, Boland T, D’Lima D D, et al., 2012, Thermal inkjet
org/10.1089/ten.2007.0196 printing in tissue engineering and regenerative medicine.
13. Ozbolat I T, Moncal K K, Gudapati H, 2017, Evaluation of Recent Pat Drug Deliv Formul, 6(2): 149–155. https://doi.
bioprinter technologies. Addit Manuf, 13: 179–200. org/10.2174/187221112800672949
14. Jungst T, Smolan W, Schacht K, et al., 2016, Strategies 27. Ng W L, Lee J M, Yeong W Y, et al., 2017, Microvalve-
and molecular design criteria for 3D printable hydrogels. based bioprinting – process, bio-inks and applications.
Chem Rev, 116(3): 1496–1539. https://doi.org/10.1021/acs. Biomater Sci, 5(4): 632–647. https://doi.org/10.1039/
chemrev.5b00303 c6bm00861e
15. Kalil S, Sun W, 2009, Bioprinting endothelial cells with 28. deJong J, deBruin G, Reinten H, et al., 2006, Air entrapment
alginate for 3D tissue constructs. J Biomech Eng,131(11): in piezo-driven inkjet printheads. J Acoust Soc Am, 120(3):
111002. https://doi.org/10.1115/1.3128729 1257–1265.
16. Levato R, Visser J, Planell J A, et al., 2014, Biofabrication 29. Keriquel V, Oliveira H, Rémy M, et al., 2017, In situ printing
of tissue constructs by 3D bioprinting of cell-laden of mesenchymal stromal cells, by laser-assisted bioprinting,
microcarriers. Biofabrication, 6(3): 035020. https://doi. for in vivo bone regeneration applications. Sci Rep, 7(1):
org/10.1088/1758-5082/6/3/035020 1778. https://doi.org/10.1038/s41598-017-01914-x
17. Owens C M, Marga F, Forgacs G, et al., 2013, Biofabrication 30. Selimis A, Mironov V, Farsari M, 2014, Direct laser
and testing of a fully cellular nerve graft. Biofabrication, writing: Principles and materials for scaffold 3D printing.
5(4): 045007. https://doi.org/10.1088/1758-5082/5/4/045007 Microelectron Eng, 132: 83–89.
18. Yu Y, Ozbolat I T, 2014, Tissue strands as “bioink” for scale- 31. Wang Z, Abdulla R, Parker B, et al., 2015, A simple and
up organ printing. Conf Proc IEEE Eng Med Biol Soc, 2014: high-resolution stereolithography-based 3D bioprinting
1428–1431. https://doi.org/10.1109/EMBC.2014.6943868 system using visible light crosslinkable bioinks.
19. Ozbolat I T, Hospodiuk M, 2016, Current advances Biofabrication, 7(4): 045009. https://doi.org/10.1088/1758-
and future perspectives in extrusion-based bioprinting. 5090/7/4/045009
Biomaterials, 76: 321–343. https://doi.org/10.1016/ 32. Koch L, Brandt O, Deiwick A, et al., 2017, Laser-assisted
j.biomaterials.2015.10.076 bioprinting at different wavelengths and pulse durations
20. Drury J L, Mooney D J, 2003, Hydrogels for tissue with a metal dynamic release layer: A parametric study. Int J
engineering: Scaffold design variables and applications. Bioprinting, 3(1): 42–53.
Biomaterials, 24(24): 4337–4351. https://doi.org/10.1016/ 33. Zhang Y, 2014, 3D bioprinting of vasculature network for
S0142-9612(03)00340-5 tissue engineering. thesis, Iowa Research Online, University
21. Ahmed E M, 2015, Hydrogel: Preparation, characterization, of Iowa, 1–135.
and applications: A review. J Adv Res, 6(2): 105–121. https:// 34. Wu W, Deconinck A, Lewis J A, 2011, Omnidirectional
doi.org/10.1016/j.jare.2013.07.006 printing of 3D microvascular networks. Adv Mater, 23(24):
22. Suntornnond R, An J, Chua C K, 2017, Roles of support H178–183. https://doi.org/10.1002/adma.201004625
materials in 3D bioprinting. Int J Bioprinting, 3(1): 83–86. 35. Cui X, Boland T, 2009, Human microvasculature
http://dx.doi.org/10.18063/IJB.2017.01.006 fabrication using thermal inkjet printing technology.
23. Hendriks J, Willem Visser C, Henke S, et al., 2015, Biomaterials, 30(31): 6221–6227. https://doi.org/10.1016/
Optimizing cell viability in droplet-based cell deposition. Sci j.biomaterials.2009.07.056
Rep, 5: 1–10. https://doi.org/10.1038/srep11304 36. Blaeser A, Duarte Campos D F, Weber M, et al., 2013,
24. Gudapati H, Dey M, Ozbolat I, 2016, A comprehensive Biofabrication under fluorocarbon: A novel freeform
review on droplet-based bioprinting: Past, present and fabrication technique to generate high aspect ratio tissue-
future. Biomaterials, 102: 20–42. https://doi.org/10.1016/ engineered constructs. Biores Open Access, 2(5): 374–384.
j.biomaterials.2016.06.012 https://doi.org/10.1089/biores.2013.0031
25. Lee V K, Lanzi A M, Ngo H, et al., 2014, Generation of 37. Jang J, Yi H-G, Cho D-W, 2016, 3D printed tissue models:
multi-scale vascular network system within 3D hydrogel Present and future. ACS Biomater Sci Eng, 2(10): 1722–
using 3D bio-printing technology. Cell Mol Bioeng, 7(3): 1731.

14 International Journal of Bioprinting (2018)–Volume 4, Issue 2