Page 163 - IJB-10-4

International Journal of Bioprinting 3D printing innovations against infection

180. Yang Y, Li H, Xu Y, Dong Y, Shan W, Shen J. Fabrication and 191. Calero Castro FJ, Yuste Y, Pereira S, et al. Proof of concept,
evaluation of dental fillers using customized molds via 3D design, and manufacture via 3-D printing of a mesh with
printing technology. Int J Pharm. 2019;562:66-75. bactericidal capacity: behaviour in vitro and in vivo. J Tissue
doi: 10.1016/j.ijpharm.2019.03.024 Eng Regen Med. 2019;13(11):1955-1964.
doi: 10.1002/term.2944
181. Sa L, Kaiwu L, Shenggui C, et al. 3D printing dental
composite resins with sustaining antibacterial ability. 192. Choong YYC, Tan HW, Patel DC, et al. The global rise of 3D
J Mater Sci. 2018;54(4):3309-3318. printing during the COVID-19 pandemic. Nat Rev Mater.
doi: 10.1007/s10853-018-2801-7 2020;5(9):637-639.
doi: 10.1038/s41578-020-00234-3
182. Deng K, Chen H, Wei W, Wang X, Sun Y. Accuracy of tooth
positioning in 3D-printing aided manufactured complete 193. Bachtiar EO, Erol O, Millrod M, et al. 3D printing and
dentures: an in vitro study. J Dent. 2023;131:104459. characterization of a soft and biostable elastomer with high
doi: 10.1016/j.jdent.2023.104459 flexibility and strength for biomedical applications. J Mech
Behav Biomed Mater. 2020;104:103649.
183. Sonaye SY, Bokam VK, Saini A, et al. Patient-specific
3D printed Poly-ether-ether-ketone (PEEK) dental doi: 10.1016/j.jmbbm.2020.103649
implant system. J Mech Behav Biomed Mater. 2022;136: 194. Zimmerling A, Chen X. Innovation and possible long-term
105510. impact driven by COVID-19: manufacturing, personal
doi: 10.1016/j.jmbbm.2022.105510 protective equipment and digital technologies. Technol Soc.
2021;65:101541.
184. Aati S, Chauhan A, Shrestha B, Rajan SM, Aati H, Fawzy A.
Development of 3D printed dental resin nanocomposite with doi: 10.1016/j.techsoc.2021.101541
graphene nanoplatelets enhanced mechanical properties 195. Boškoski I, Gallo C, Wallace MB, Costamagna G. COVID-19
and induced drug-free antimicrobial activity. Dent Mater. pandemic and personal protective equipment shortage:
2022;38(12):1921-1933. protective efficacy comparing masks and scientific methods
doi: 10.1016/j.dental.2022.10.001 for respirator reuse. Gastrointest Endosc. 2020;92(3):519-523.
doi: 10.1016/j.gie.2020.04.048
185. Nappi F, Iervolino A, Singh SSA. The new challenge for heart
endocarditis: from conventional prosthesis to new devices 196. Swennen GRJ, Pottel L, Haers PE. Custom-made 3D-printed
and platforms for the treatment of structural heart disease. face masks in case of pandemic crisis situations with a lack of
Biomed Res Int. 2021;2021:7302165. commercially available FFP2/3 masks. Int J Oral Maxillofac
doi: 10.1155/2021/7302165 Surg. 2020;49(5):673-677.
doi: 10.1016/j.ijom.2020.03.015
186. Shen Y, Yu X, Cui J, et al. Development of biodegradable
polymeric stents for the treatment of cardiovascular diseases. 197. McAvoy M, Bui AN, Hansen C, et al. 3D Printed frames
Biomolecules. 2022;12(9). to enable reuse and improve the fit of N95 and KN95
doi: 10.3390/biom12091245 respirators. BMC Biomed Eng. 2021;3(1):10.
doi: 10.1186/s42490-021-00055-7
187. Wang HJ, Hao MF, Wang G, et al. Zein nanospheres assisting
inorganic and organic drug combination to overcome stent 198. Ballard DH, Jammalamadaka U, Meacham KW, et al.
implantation-induced thrombosis and infection. Sci Total Quantitative fit tested N95 respirator-alternatives generated
Environ. 2023;873:162438. with CT imaging and 3D printing: a response to potential
doi: 10.1016/j.scitotenv.2023.162438 shortages during the COVID-19 pandemic. Acad Radiol.
2021;28(2):158-165.
188. Kabirian F, Mozafari M, Mela P, Heying R. Incorporation
of controlled release systems improves the functionality of doi: 10.1016/j.acra.2020.11.005
biodegradable 3D printed cardiovascular implants. ACS 199. Oland G, Garner O, de St Maurice A. Prospective clinical
Biomater Sci Eng. 2023;9(11):5953-5967. validation of 3D printed nasopharyngeal swabs for diagnosis
doi: 10.1021/acsbiomaterials.3c00559 of COVID-19. Diagn Microbiol Infect Dis. 2021;99(3):115257.
doi: 10.1016/j.diagmicrobio.2020.115257
189. Kabirian F, Ditkowski B, Zamanian A, Hoylaerts MF,
Mozafari M, Heying R. Controlled NO-release from 200. Williams E, Bond K, Isles N, et al. Pandemic printing: a
3D-printed small-diameter vascular grafts prevents platelet novel 3D-printed swab for detecting SARS-CoV-2. Med J
activation and bacterial infectivity. ACS Biomater Sci Eng. Aust. 2020;213(6):276-279.
2019;5(5):2284-2296. doi: 10.5694/mja2.50726
doi: 10.1021/acsbiomaterials.9b00220
201. Alghounaim M, Almazeedi S, Al Youha S, et al. Low-
190. Pérez-Köhler B, Benito-Martínez S, Gómez-Gil V, Rodríguez cost polyester-tipped three-dimensionally printed
M, Pascual G, Bellón JM. New insights into the application nasopharyngeal swab for the detection of severe acute
of 3D-printing technology in hernia repair. Materials respiratory syndrome-related coronavirus 2 (SARS-CoV-2).
(Basel). 2021;14(22). J Clin Microbiol. 2020;58(11).
doi: 10.3390/ma14227092 doi: 10.1128/jcm.01668-20

Volume 10 Issue 4 (2024) 155 doi: 10.36922/ijb.2338