Page 373 - IJB-10-4

International Journal of Bioprinting 3D-printed PEEK in cranioplasty

45. Yang J, Sun T, Yuan Y, Li X, Yu H, Guan J. Evaluation of 49. Falland-Cheung L, Waddell JN, Li KC, Tong D, Brunton
titanium cranioplasty and polyetheretherketone cranioplasty P. Investigation of the elastic modulus, tensile and flexural
after decompressive craniectomy for traumatic brain injury. strength of five skull simulant materials for impact testing
Medicine. 2020;99(30):e21251. of a forensic skin/skull/brain model. J Mech Behav Biomed
doi: 10.1097/MD.0000000000021251 Mater. 2017;68:303-307.
46. Roberts JC, Merkle AC, Carneal CM. Development of a doi: 10.1016/j.jmbbm.2017.02.023
human cranial bone surrogate for impact studies. Front 50. Haleem A, Javaid M. Polyether ether ketone (PEEK) and
Bioeng Biotechnol. 2013;1:13. its 3D printed implants applications in medical field: an
doi: 10.3389/fbioe.2013.00013
overview. Clin Epidemiol Glob Health. 2019;7:571-577.
47. Delille R, Leseur P, Portier P, Drazetic P, Markiewicz E. doi: 10.1016/j.cegh.2019.01.003
Experimental study of the bone behaviour of the human
skull bone for the development of a physical head model. Int 51. Yap YL, Tan YSE, Tan HKJ, et al. 3D printed bio-models
J Crashworth. 2007;112(2):101-108. for medical applications. Rapid Prototyp J. 2017;23(2):
doi: 10.1080/13588260701433081 227-235.
doi: 10.1108/RPJ-08-2015-0102
48. Christophe D, Séverine B, Catherine M, Drazétic P.
Identification des lois de comportement du crâne à partir 52. Haleem A, Javaid M. 3D scanning applications in medical
d’essais de flexionIdentification of skull behavior laws field: a literature-based review. Clin Epidemiol Glob Health.
starting from bending tests. Mech Ind. 2003;4(2):119-123. 2018;7(2):199-210.
doi: 10.1016/S1296-2139(03)00029-0 doi: 10.1016/j.cegh.2018.05.006

Volume 10 Issue 4 (2024) 365 doi: 10.36922/ijb.2583