Page 452 - IJB-10-4

International Journal of Bioprinting Improving ductility of 3D-printed Zn–Mg

44. Falk T, Svensson JE, Johansson LG. The influence of CO 2 doi: 10.1016/j.bioactmat.2020.07.004
and NaCl on the atmospheric corrosion of zinc: a laboratory
study. J Electrochem Soc. 1998;145(9):2993. 47. Li HF, Xie XH, Zheng YF, et al. Development of biodegradable
doi: 10.1149/1.1838753 Zn-1X binary alloys with nutrient alloying elements Mg, Ca
and Sr. Sci Rep. 2015;5(1):10719.
45. Ralston KD, Birbilis N, Davies C. Revealing the relationship doi: 10.1038/srep10719
between grain size and corrosion rate of metals. Scr Mater.
2010;63(12):1201-1204. 48. García-Mintegui C, Córdoba LC, Buxadera-Palomero J,
doi: 10.1016/j.scriptamat.2010.08.035 et al. Zn-Mg and Zn-Cu alloys for stenting applications:
46. Pachla W, Przybysz S, Jarzębska A, et al. Structural and from nanoscale mechanical characterization to in
mechanical aspects of hypoeutectic Zn–Mg binary alloys vitro degradation and biocompatibility. Bioact Mater.
for biodegradable vascular stent applications. Bioact Mater. 2021;6(12):4430-4446.
2021;6(1):26-44. doi: 10.1016/j.bioactmat.2021.04.015

Volume 10 Issue 4 (2024) 444 doi: 10.36922/ijb.3034