Page 381 - IJB-10-5
P. 381
International Journal of Bioprinting Tunable anisotropic gyroid bioscaffolds
Figure 6. Morphological analysis of specimens fabricated through different processes. (a) Illustration of the pyrolysis and sintering of 3D-printed specimen
using susceptor-assisted hybrid pyrolysis-sintering (SHPS) process. The scanning electron microscopic (SEM) images for sintered (b) SHPS120m, (c)
RCS120m, (d) MW120m specimens, and (e) the corresponding reconstructed micro-computed tomography (µ-CT) 3D image for defect identification.
Volume 10 Issue 5 (2024) 373 doi: 10.36922/ijb.3609
