Page 390 - IJB-10-5

International Journal of Bioprinting Tunable anisotropic gyroid bioscaffolds

31. Wan W, Huang C-e, Yang J, Zeng J, Qiu T. Effect of sintering 35. Luongo A, Falster V, Doest MB, et al. Microstructure control
temperature on the properties of fused silica ceramics prepared in 3D printing with digital light processing. Comp Graph
by gelcasting. J Electron Mater. 2014;43(7):2566-2572. Forum. 2020;39(1):347-359.
doi: 10.1007/s11664-014-3112-7 doi: 10.1111/cgf.13807
32. Yeung K-W, Chen L, Tang C-Y, et al. Rapid hybrid microwave 36. Schamberger B, Ziege R, Anselme K, et al. Curvature
cladding of SiO 2/TiO 2 sol–gel derived composite coatings. in biological systems: its quantification, emergence,
J Sol-Gel Sci Technol. 2021;98(1):35-44. and implications across the scales. Adv Mater.
doi: 10.1007/s10971-021-05498-x 2023;35(13):2206110.
doi: 10.1002/adma.202206110
33. Bhattacharya M, Basak T. A review on the susceptor assisted
microwave processing of materials. Energy. 2016;97:306-338. 37. Karayannis VG. Microwave sintering of ceramic materials.
doi: 10.1016/j.energy.2015.11.034 IOP Conf Ser Mater Sci Eng. 2016;161(1):012068.
doi: 10.1088/1757-899X/161/1/012068
34. Liu Z, Ma C, Chang Z, Yan P, Li F. Advances in crack
formation mechanism and inhibition strategy for ceramic 38. Chorsi MT, Curry EJ, Chorsi HT, et al. Piezoelectric
additive manufacturing. J Eur Ceram Soc. 2023;43(12): biomaterials for sensors and actuators. Adv Mater.
5078-5098. 2019;31(1):e1802084.
doi: 10.1016/j.jeurceramsoc.2023.05.008 doi: 10.1002/adma.201802084

Volume 10 Issue 5 (2024) 382 doi: 10.36922/ijb.3609