Page 546 - IJB-10-5

International Journal of Bioprinting Biomimetic scaffolds for mandibular repair

Acknowledgments References
We are grateful to the Intelligent Soft Matter Team at the 1. Brown JS, Barry C, Ho M, Shaw R. A new classification
Songshan Lake Materials Laboratory for providing the for mandibular defects after oncological resection. Lancet
laser scanning confocal microscope used for capturing Oncol. 2016;17(1):e23-30.
cell morphology. doi: 10.1016/S1470-2045(15)00310-1

2. Miljanovic D, Seyedmahmoudian M, Stojcevski A, Horan
Funding B. Design and fabrication of implants for mandibular
The study was supported by the Dongguan Science and craniofacial defects using different medical-additive
and Technology of Social Development Program manufacturing technologies: a review. Ann Biomed Eng.
(20231800940152), Talent Development Foundation of the 2020;48(9):2285-2300.
doi: 10.1007/s10439-020-02567-0
First Dongguan Affiliated Hospital of Guangdong Medical
University (GCC2023013), Guangdong Medical University 3. Sivaraman K, Chopra A, Venkatesh SB. Clinical importance
Undergraduate Innovation Experiment Project (FYDS001, of median mandibular flexure in oral rehabilitation: a review.
J Oral Rehabil. 2016;43(3):215-225.
FYDS002, FYDS003), Guangdong University Student doi: 10.1111/joor.12361
Innovation Project (S202310571068, S202310571069),
and 2024 Special Funds for Science and Technology 4. Pickrell BB, Serebrakian AT, Maricevich RS. Mandible
Innovation Strategy of Guangdong Province (Cultivation fractures. Semin Plast Surg. 2017;31(2):100-107.
doi: 10.1055/s-0037-1601374
of Science and Technology Innovation for University
Students) (pdjh2024b185). 5. García-Lamas L, Lozano D, Jiménez-Díaz V, et al. Enriched
mesoporous bioactive glass scaffolds as bone substitutes in
Conflict of interest critical diaphyseal bone defects in rabbits. Acta Biomater.
2024;180:104-114.
The authors declare no conflicts of interest. doi: 10.1016/j.actbio.2024.04.005
6. Stahl A, Yang YP. Regenerative approaches for the
Author contributions treatment of large bone defects. Tissue Eng Part B Rev.
Conceptualization: Jiaqi Hu, Hong Zhu, Shanqin Liang, 2021;27(6):539-547.
doi: 10.1089/ten.TEB.2020.0281
Xiaochuan Liu
Data curation: Jiaqi Hu, Hong Zhu 7. Zheng X, Fu Z, Du K, Wang C, Yi Y. Minimal surface designs
Formal analysis: Jiaqi Hu, Shanqin Liang for porous materials: from microstructures to mechanical
Funding acquisition: Jingying Zhang, Shanqin Liang properties. J Mater Sci. 2018;53(14):10194-10208.
Investigation: Hong Zhu, Chongqing He doi: 10.1007/s10853-018-2285-5
Writing–original draft: Jiaqi Hu, Hong Zhu 8. Shen M, Li Y, Lu F, et al. Bioceramic scaffolds with triply
Writing–review & editing: Jingying Zhang, Kenny Man, periodic minimal surface architectures guide early-stage
Shanqin Liang, Xiaochuan Liu bone regeneration. Bioact Mater. 2023;25:374-386.
All authors have reviewed and approved the final version doi: 10.1016/j.bioactmat.2023.02.012
of the manuscript. 9. Wang C, Lai J, Li K, et al. Cryogenic 3D printing of dual-
delivery scaffolds for improved bone regeneration with
Ethics approval and consent to participate enhanced vascularization. Bioact Mater. 2021;6(1):137-145.
doi: 10.1016/j.bioactmat.2020.07.007
All animal surgical protocols were approved by the 10. Zhu H, Wang J, Wang S, et al. Additively manufactured
Institutional Animal Care and Use Committee at bioceramic scaffolds based on triply periodic
Guangdong Medical University (GDY2204012). minimal surfaces for bone regeneration. J Tissue Eng.
2024;15:20417314241244997.
Consent for publication doi: 10.1177/20417314241244997
Not applicable. 11. Ahn J-H, Kim J, Han G, et al. 3D-printed biodegradable
composite scaffolds with significantly enhanced mechanical
Availability of data properties via the combination of binder jetting and
capillary rise infiltration process. Addit Manufactur. 2021;41:
All data needed to validate the conclusions of this study are 101988.
presented in the paper. doi: 10.1016/j.addma.2021.101988

Volume 10 Issue 5 (2024) 538 doi: 10.36922/ijb.4147