Page 46 - IJB-6-1

Solvent-based extrusion 3D printing
Drug Delivery. Int J Pharm, 351(1–2):201–8. DOI: 10.1016/j. Mg/PCL Hybrid Bone Substitute for Osteoporotic Fracture
ijpharm.2007.09.041. Fixation. Biomaterials, 34(29):7016–32. DOI: 10.1016/j.
62. Kuo M, Yen S, 2002, The Process of Electrochemical biomaterials.2013.05.062.
Deposited Hydroxyapatite Coatings on Biomedical Titanium 67. Ning L, Chen X, 2017, A Brief Review of Extrusion-based
at Room Temperature. Mater Sci Eng C, 20(1):153–60. DOI: Tissue Scaffold Bio-printing. Biotechnol J, 12(8):1600671.
10.1016/s0928-4931(02)00026-7. DOI: 10.1002/biot.201600671.
63. Murugan R, Ramakrishna S, 2005, Development of 68. Marin AC, 2016, In silico Study of the Mechanisms of Cell
Nanocomposites for Bone Grafting. Compos Sci Technol, Deposition into 3D Rapid Prototyping Scaffolds Under in vitro
65(15-16):2385–406. Hydrodynamic Conditions. Thesis. University of Sheffield.
64. Kolan K, Liu Y, Baldridge J, et al., 2017, Solvent Based 69. Melchels FP, Bertoldi K, Gabbrielli R, et al., 2010,
3D Printing of Biopolymer/Bioactive Glass Composite and Mathematically Defined Tissue Engineering Scaffold
Hydrogel for Tissue Engineering Applications. Procedia Architectures Prepared by Stereolithography. Biomaterials,
CIRP, 65:38–43. DOI: 10.1016/j.procir.2017.04.022. 31(27):6909–16. DOI: 10.1016/j.biomaterials.2010.05.068.
65. Zheng Y, Gu X, Witte F, 2014, Biodegradable Metals. Mater 70. Grayson WL, Fröhlich M, Yeager K, et al., 2010, Engineering
Sci Eng, 77:1–34. Anatomically Shaped Human Bone Grafts. Proc Natl Acad
66. Wong HM, Wu S, Chu PK, et al., 2013, Low-modulus Sci, 107(8):3299–304. DOI: 10.1073/pnas.0905439106.

42 International Journal of Bioprinting (2020)–Volume 6, Issue 1